Re: [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register

From: Matthias Brugger <matthias.bgg@gmail.com>
To: Chao Hao <chao.hao@mediatek.com>, Joerg Roedel <joro@8bytes.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, FY Yang <fy.yang@mediatek.com>,
	wsd_upstream@mediatek.com, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org,
	linux-mediatek@lists.infradead.org,
	Yong Wu <yong.wu@mediatek.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register
Date: Wed, 17 Jun 2020 11:34:55 +0200	[thread overview]
Message-ID: <aaf422f5-2ac8-252d-a064-0c1246e09acc@gmail.com> (raw)
In-Reply-To: <20200617030029.4082-4-chao.hao@mediatek.com>

On 17/06/2020 05:00, Chao Hao wrote:
> Add F_MMU_IN_ORDER_WR_EN definition in MISC_CTRL.
> In order to improve performance, we always disable STANDARD_AXI_MODE
> and IN_ORDER_WR_EN in MISC_CTRL.
> 
> Change since v3:

The changelog should go below the '---' as we don't want this in the git history
once the patch get's accepted.

> 1. Rename Disable STANDARD_AXI_MODE in MISC_CTRL to Set MISC_CTRL register
> 2. Add F_MMU_IN_DRDER_WR_EN definition in MISC_CTRL
>        We need to disable in_order_write to improve performance
> 
> Cc: Yong Wu <yong.wu@mediatek.com>
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> ---
>  drivers/iommu/mtk_iommu.c | 11 +++++++++++
>  drivers/iommu/mtk_iommu.h |  1 +
>  2 files changed, 12 insertions(+)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 88d3df5b91c2..239d2cdbbc9f 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -42,6 +42,9 @@
>  #define F_INVLD_EN1				BIT(1)
>  
>  #define REG_MMU_MISC_CTRL			0x048
> +#define F_MMU_IN_ORDER_WR_EN			(BIT(1) | BIT(17))
> +#define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
> +
>  #define REG_MMU_DCM_DIS				0x050
>  
>  #define REG_MMU_CTRL_REG			0x110
> @@ -578,6 +581,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>  		writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
>  	}
>  
> +	if (data->plat_data->has_misc_ctrl) {

That's confusing. We renamed the register to misc_ctrl, but it's present in all
SoCs. We should find a better name for this flag to describe what the hardware
supports.

Regards,
Matthias

> +		/* For mm_iommu, it can improve performance by the setting */
> +		regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
> +		regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
> +		regval &= ~F_MMU_IN_ORDER_WR_EN;
> +		writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
> +	}
> +
>  	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
>  			     dev_name(data->dev), (void *)data)) {
>  		writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index 1b6ea839b92c..d711ac630037 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -40,6 +40,7 @@ struct mtk_iommu_plat_data {
>  
>  	/* HW will use the EMI clock if there isn't the "bclk". */
>  	bool                has_bclk;
> +	bool		    has_misc_ctrl;
>  	bool                has_vld_pa_rng;
>  	bool                reset_axi;
>  	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel