From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: devicetree@vger.kernel.org, "Dave Gerlach" <d-gerlach@ti.com>,
Keerthy <j-keerthy@ti.com>, "Tero Kristo" <t-kristo@ti.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/4] ARM: dts: am437x: Move l4 child devices to probe them with ti-sysc
Date: Fri, 7 Dec 2018 14:46:47 +0200 [thread overview]
Message-ID: <ae6c0180-ca44-c8d9-8a15-0b8debd99c9a@ti.com> (raw)
In-Reply-To: <20181205230242.GH6707@atomide.com>
Tony,
On 06/12/2018 1.02, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [181205 19:00]:
>> I think we're missing the top level ranges for mcasp l3 port
>> and the translation goes wrong there, I'll fix it hopefully
>> today.
>
> Below is a fix for am473x that works for me as tested with
> am473x-sk-evm. Care to test please?
the patch works, thanks!
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> I'll send also a similar fix for am335x separately. And
> then for dra7. Looks like for dra7 we're also missing the
> mcasp optional clocks too.
>
> Regards,
>
> Tony
>
> 8< ------------
> From tony Mon Sep 17 00:00:00 2001
> From: Tony Lindgren <tony@atomide.com>
> Date: Wed, 5 Dec 2018 14:08:21 -0800
> Subject: [PATCH] ARM: dts: Add missing ranges for am437x mcasp l3 ports
>
> We need to add mcasp l3 port ranges for mcasp to use a correct l3
> data port address for dma.
>
> Fixes: d95adfd45853 ("ARM: dts: am437x: Move l4 child devices to
> probe them with ti-sysc")
> Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> arch/arm/boot/dts/am437x-l4.dtsi | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
> --- a/arch/arm/boot/dts/am437x-l4.dtsi
> +++ b/arch/arm/boot/dts/am437x-l4.dtsi
> @@ -613,7 +613,9 @@
> ranges = <0x00000000 0x48000000 0x100000>, /* segment 0 */
> <0x00100000 0x48100000 0x100000>, /* segment 1 */
> <0x00200000 0x48200000 0x100000>, /* segment 2 */
> - <0x00300000 0x48300000 0x100000>; /* segment 3 */
> + <0x00300000 0x48300000 0x100000>, /* segment 3 */
> + <0x46000000 0x46000000 0x400000>, /* l3 data port */
> + <0x46400000 0x46400000 0x400000>; /* l3 data port */
>
> segment@0 { /* 0x48000000 */
> compatible = "simple-bus";
> @@ -664,7 +666,9 @@
> <0x00034000 0x00034000 0x001000>, /* ap 80 */
> <0x00035000 0x00035000 0x001000>, /* ap 81 */
> <0x00036000 0x00036000 0x001000>, /* ap 84 */
> - <0x00037000 0x00037000 0x001000>; /* ap 85 */
> + <0x00037000 0x00037000 0x001000>, /* ap 85 */
> + <0x46000000 0x46000000 0x400000>, /* l3 data port */
> + <0x46400000 0x46400000 0x400000>; /* l3 data port */
>
> target-module@8000 { /* 0x48008000, ap 6 10.0 */
> compatible = "ti,sysc";
> @@ -826,7 +830,8 @@
> clock-names = "fck";
> #address-cells = <1>;
> #size-cells = <1>;
> - ranges = <0x0 0x38000 0x2000>;
> + ranges = <0x0 0x38000 0x2000>,
> + <0x46000000 0x46000000 0x400000>;
>
> mcasp0: mcasp@0 {
> compatible = "ti,am33xx-mcasp-audio";
> @@ -857,7 +862,8 @@
> clock-names = "fck";
> #address-cells = <1>;
> #size-cells = <1>;
> - ranges = <0x0 0x3c000 0x2000>;
> + ranges = <0x0 0x3c000 0x2000>,
> + <0x46400000 0x46400000 0x400000>;
>
> mcasp1: mcasp@0 {
> compatible = "ti,am33xx-mcasp-audio";
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-07 12:45 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-25 0:05 [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc Tony Lindgren
2018-09-25 0:05 ` [PATCH 1/4] ARM: dts: am437x: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren
2018-09-25 0:05 ` [PATCH 2/4] ARM: dts: am437x: Move l4 child devices to probe them with ti-sysc Tony Lindgren
2018-12-04 12:23 ` Peter Ujfalusi
2018-12-04 18:11 ` Tony Lindgren
2018-12-04 23:18 ` Tony Lindgren
2018-12-05 6:14 ` Peter Ujfalusi
2018-12-05 19:00 ` Tony Lindgren
2018-12-05 23:02 ` Tony Lindgren
2018-12-07 12:46 ` Peter Ujfalusi [this message]
2018-09-25 0:05 ` [PATCH 3/4] ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren
2018-09-27 14:56 ` Tony Lindgren
2018-09-25 0:05 ` [PATCH 4/4] ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc Tony Lindgren
2018-11-27 13:03 ` Peter Ujfalusi
2018-11-27 16:16 ` Tony Lindgren
2018-11-28 12:52 ` Peter Ujfalusi
2018-11-29 19:07 ` Tony Lindgren
2018-09-25 5:14 ` [PATCH 0/4] Update am437x and am335x dts to probe " Keerthy
2018-09-25 14:40 ` Tony Lindgren
2018-09-25 17:55 ` Tony Lindgren
2018-09-25 21:16 ` Grygorii Strashko
2018-09-26 4:08 ` Keerthy
2018-09-26 15:59 ` Tony Lindgren
2018-09-26 16:23 ` Tony Lindgren
2018-09-26 21:36 ` Grygorii Strashko
2018-09-26 23:31 ` Tony Lindgren
2018-09-27 4:55 ` Keerthy
2018-09-27 14:53 ` Tony Lindgren
2018-09-27 21:43 ` Tony Lindgren
2018-10-01 16:32 ` Tony Lindgren
2018-10-04 4:29 ` Keerthy
2018-10-04 14:23 ` Tony Lindgren
2018-09-27 19:11 ` Grygorii Strashko
2018-09-27 19:38 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ae6c0180-ca44-c8d9-8a15-0b8debd99c9a@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=bcousson@baylibre.com \
--cc=d-gerlach@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).