From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 501D7C31E5D for ; Tue, 18 Jun 2019 07:38:18 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 27ED320823 for ; Tue, 18 Jun 2019 07:38:18 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="oCsJS2WK"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=ti.com header.i=@ti.com header.b="mXZmfTww" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 27ED320823 Authentication-Results: mail.kernel.org; dmarc=fail (p=quarantine dis=none) header.from=ti.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:Date: Message-ID:From:References:To:Subject:Reply-To:Content-ID:Content-Description :Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=2c/v8Qv5HjGIHolWpfh2biEG8ZQeePz5o9B6Z09wWR8=; b=oCsJS2WKRe8Jza TZA0INejq1ZgnCAbhIGVE/52+yEE7YDuPzm/JaQwCtR98QWjFzSIuE8rAsY4iSX8pTDs2A09cCyyl QOr2pEn8AXS/ihhxF6+irrNuhtsyde4nSYfI7yDMTMTsRl3HglkxQs96lDHSESkqZomKMIpS+nQMO Utan6h2vCd1JteiPPI/wIRZdIfuvBl6Q6POQFwj+C/ilqJt5JECAaN6FkDHht6V9gp6xB6+iktZQ7 VbBUAjuC3+tTmKX2FyvHi1L5//JlhADiIPCnTel6QITwvdgrPgar9sgiqHbBuaJNek3+MmTHejTyr nQpJ/yoXhu5TTeTuldIg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92 #3 (Red Hat Linux)) id 1hd8h7-0000TB-2Q; Tue, 18 Jun 2019 07:38:17 +0000 Received: from fllv0016.ext.ti.com ([198.47.19.142]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1hd8gr-0000Hi-6a; Tue, 18 Jun 2019 07:38:03 +0000 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id x5I7bf3L051003; Tue, 18 Jun 2019 02:37:41 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1560843461; bh=4bfEc87X2lfeLbz5EXurKhL9OniFY8iKEuWeIQ7XcOA=; h=Subject:To:CC:References:From:Date:In-Reply-To; b=mXZmfTww9Gi7bddiTlC/pqFabddbRDzMz/A+AtPdQX5elNaK55cvlZH+Nm32284Jd Fi/6QuG9Cut0o9OGtay5awonlySP2tfXSnBr999qNeE6tZgobyxokWLyKfq1hRa0eQ hkBcHZxNPaC7QD4HAt1xDJsoPycSbs6N3wNLqdlo= Received: from DFLE107.ent.ti.com (dfle107.ent.ti.com [10.64.6.28]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id x5I7bfHu037012 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 18 Jun 2019 02:37:41 -0500 Received: from DFLE115.ent.ti.com (10.64.6.36) by DFLE107.ent.ti.com (10.64.6.28) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5; Tue, 18 Jun 2019 02:37:41 -0500 Received: from fllv0040.itg.ti.com (10.64.41.20) by DFLE115.ent.ti.com (10.64.6.36) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5 via Frontend Transport; Tue, 18 Jun 2019 02:37:40 -0500 Received: from [172.24.190.89] (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id x5I7barM105813; Tue, 18 Jun 2019 02:37:37 -0500 Subject: Re: [PATCH v5 3/5] mtd: Add support for HyperBus memory devices To: Sergei Shtylyov , David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Rob Herring References: <20190609103227.24875-1-vigneshr@ti.com> <20190609103227.24875-4-vigneshr@ti.com> <58e9608d-35ff-0436-6075-b2e4ed4b8594@cogentembedded.com> <9dbd8132-ce8f-9ce7-ddf5-d9826e2a1be1@cogentembedded.com> From: Vignesh Raghavendra Message-ID: Date: Tue, 18 Jun 2019 13:08:21 +0530 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.7.0 MIME-Version: 1.0 In-Reply-To: <9dbd8132-ce8f-9ce7-ddf5-d9826e2a1be1@cogentembedded.com> Content-Language: en-US X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190618_003801_376822_05FF7AA5 X-CRM114-Status: GOOD ( 30.84 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Tudor Ambarus , linux-kernel@vger.kernel.org, Joakim Tjernlund , linux-mtd@lists.infradead.org, Miquel Raynal , Mason Yang , linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org On 18/06/19 1:15 AM, Sergei Shtylyov wrote: > Hello! > > On 06/11/2019 02:57 PM, Vignesh Raghavendra wrote: > >>>> Cypress' HyperBus is Low Signal Count, High Performance Double Data Rate >>>> Bus interface between a host system master and one or more slave >>>> interfaces. HyperBus is used to connect microprocessor, microcontroller, >>>> or ASIC devices with random access NOR flash memory (called HyperFlash) >>>> or self refresh DRAM (called HyperRAM). >>>> >>>> Its a 8-bit data bus (DQ[7:0]) with Read-Write Data Strobe (RWDS) >>>> signal and either Single-ended clock(3.0V parts) or Differential clock >>>> (1.8V parts). It uses ChipSelect lines to select b/w multiple slaves. >>>> At bus level, it follows a separate protocol described in HyperBus >>>> specification[1]. >>>> >>>> HyperFlash follows CFI AMD/Fujitsu Extended Command Set (0x0002) similar >>>> to that of existing parallel NORs. Since HyperBus is x8 DDR bus, >>>> its equivalent to x16 parallel NOR flash wrt bits per clock cycle. But >>>> HyperBus operates at >166MHz frequencies. >>>> HyperRAM provides direct random read/write access to flash memory >>>> array. >>>> >>>> But, HyperBus memory controllers seem to abstract implementation details >>>> and expose a simple MMIO interface to access connected flash. >>>> >>>> Add support for registering HyperFlash devices with MTD framework. MTD >>>> maps framework along with CFI chip support framework are used to support >>>> communicating with flash. >>>> >>>> Framework is modelled along the lines of spi-nor framework. HyperBus >>>> memory controller (HBMC) drivers calls hyperbus_register_device() to >>>> register a single HyperFlash device. HyperFlash core parses MMIO access >>>> information from DT, sets up the map_info struct, probes CFI flash and >>>> registers it with MTD framework. >>>> >>>> Some HBMC masters need calibration/training sequence[3] to be carried >>>> out, in order for DLL inside the controller to lock, by reading a known >>>> string/pattern. This is done by repeatedly reading CFI Query >>>> Identification String. Calibration needs to be done before trying to detect >>>> flash as part of CFI flash probe. >>>> >>>> HyperRAM is not supported at the moment. >>>> >>>> HyperBus specification can be found at[1] >>>> HyperFlash datasheet can be found at[2] >>>> >>>> [1] https://www.cypress.com/file/213356/download >>>> [2] https://www.cypress.com/file/213346/download >>>> [3] http://www.ti.com/lit/ug/spruid7b/spruid7b.pdf >>>> Table 12-5741. HyperFlash Access Sequence >>>> >>>> Signed-off-by: Vignesh Raghavendra >>> [...] >>>> diff --git a/drivers/mtd/hyperbus/hyperbus-core.c b/drivers/mtd/hyperbus/hyperbus-core.c >>>> new file mode 100644 >>>> index 000000000000..df1f75e10b1a >>>> --- /dev/null >>>> +++ b/drivers/mtd/hyperbus/hyperbus-core.c >>>> @@ -0,0 +1,191 @@ >>>> +// SPDX-License-Identifier: GPL-2.0 >>>> +// >>>> +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ >>>> +// Author: Vignesh Raghavendra >>>> + >>>> +#include >>>> +#include >>>> +#include >>>> +#include >>>> +#include >>>> +#include >>>> +#include >>>> +#include >>>> +#include >>>> +#include >>>> + >>>> +#define HYPERBUS_CALIB_COUNT 25 >>> >>> Mhm, I think I've already protested about this being #define'd here... >> >> I thought you had agreed that default optional calibration routine can >> be part of core code and thus this #define. >> >> Anyways, what is your preference here? Drop the constant and use a local >> variable in hyperbus_calibrate()? >> Or are you suggesting to move hyperbus_calibrate() TI's specific driver? > > I'm just not comfortable with the common HF code using quite an arbitrary > constant... > Ok, I will move the code over to TI driver. We can always bring it back to core code if more drivers need it. >>> [...] >>>> diff --git a/include/linux/mtd/hyperbus.h b/include/linux/mtd/hyperbus.h >>>> new file mode 100644 >>>> index 000000000000..ee2eefd822c9 >>>> --- /dev/null >>>> +++ b/include/linux/mtd/hyperbus.h >>>> @@ -0,0 +1,91 @@ > [...] >>>> + * @mtd: pointer to MTD struct >>>> + * @ctlr: pointer to HyperBus controller struct >>>> + * @memtype: type of memory device: HyperFlash or HyperRAM >>>> + * @registered: flag to indicate whether device is registered with MTD core >>>> + */ >>>> + >>>> +struct hyperbus_device { >>>> + struct map_info map; >>>> + struct device_node *np; >>>> + struct mtd_info *mtd; >>>> + struct hyperbus_ctlr *ctlr; >>>> + enum hyperbus_memtype memtype; >>>> + bool registered; >>>> +}; >>>> + >>>> +/** >>>> + * struct hyperbus_ops - struct representing custom HyperBus operations >>>> + * @read16: read 16 bit of data, usually from register/ID-CFI space >>>> + * @write16: write 16 bit of data, usually to register/ID-CFI space >>> >>> Usually? How to differ the register/memory transfers if both are possible? > >> CFI + map framework does not provide a way to differentiate b/w reg >> access vs memory access. read16()/write16() is used to either access >> registers or for sending various cmds like lock/unlock etc or for >> programming a single word. >> For regular read/writes copy_from() and copy_to() are used. > > In my case only copy_from() would exist -- no proper acceleration for > writes... > Actually copy_to() is not used by cfi_cmdset_0002.c, its always write16() that used to program flash. This is something I want to extend support to, so as to use DMA for writes as well because I see that writes seem extremely slow at least on my platform. >> Looking at HyperBus protocol, controllers would not need to >> differentiate b/w registers vs memory transfers for HyperFlash devices. >> So, I think I can drop read16/write16 and redirect these calls to >> copy_from()/copy_to() > > Doubt it, frankly speaking. Sorry for confusion, as I said above, we do need to keep write16(). Also, copy_to maps to memcpy_toio in case of simple_map which may not use 16 bit IO accessors. So write16() cannot be mapped to copy_to() So we need at least write16(), copy_from() and mostly copy_to() (for accelerating writes). So, lets keep this simple and have all map ops including read16() as is. > >> I mainly added these functions keeping HyperRAM in mind. Idea was >> drivers would look at hyperbus_device->memtype and set to register >> access mode for HyperRAM in case of write16()/read16(). Looks like the >> interface is not intuitive enough >> So, will drop these and add it back when adding HyperRAM support. >> >> Does that work for your HW as well? > > Don't think so... > > However, my HyperFlash driver could make use of the following #define's in > the HyperBus header: > > #define HF_CMD_CA47 BIT(7) /* Read */ > #define HF_CMD_CA46 BIT(6) /* Register space */ > #define HF_CMD_CA45 BIT(5) /* Linear burst */ > > #define HF_CMD_READ_REG (HF_CMD_CA47 | HF_CMD_CA46) This will come into play for HyperRAM, not a care about for HyperFlash > #define HF_CMD_READ_MEM HF_CMD_CA47 For HyperFlash, this would be the only bit that needs to be set for read along with HF_CMD_CA45 for linear burst. > #define HF_CMD_WRITE_REG HF_CMD_CA46 > #define HF_CMD_WRITE_MEM 0 > > MBR, Sergei > -- Regards Vignesh _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel