linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Chuanjia Liu <chuanjia.liu@mediatek.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: devicetree@vger.kernel.org, Ryder Lee <ryder.lee@mediatek.com>,
	Frank Wunderlich <frank-w@public-files.de>,
	linux-pci@vger.kernel.org, linux-mediatek@lists.infradead.org,
	yong.wu@mediatek.com, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 2/4] PCI: mediatek: Use regmap to get shared pcie-cfg base
Date: Thu, 10 Sep 2020 12:44:08 +0200	[thread overview]
Message-ID: <b627b938-2210-16d2-1682-3c25506e30f3@gmail.com> (raw)
In-Reply-To: <20200910061115.909-3-chuanjia.liu@mediatek.com>



On 10/09/2020 08:11, Chuanjia Liu wrote:
> Use regmap to get shared pcie-cfg base and change
> the method to get pcie irq.
> 
> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
> ---
>   drivers/pci/controller/pcie-mediatek.c | 25 ++++++++++++++++++-------
>   1 file changed, 18 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
> index cf4c18f0c25a..987845d19982 100644
> --- a/drivers/pci/controller/pcie-mediatek.c
> +++ b/drivers/pci/controller/pcie-mediatek.c
> @@ -14,6 +14,7 @@
>   #include <linux/irqchip/chained_irq.h>
>   #include <linux/irqdomain.h>
>   #include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
>   #include <linux/msi.h>
>   #include <linux/module.h>
>   #include <linux/of_address.h>
> @@ -23,6 +24,7 @@
>   #include <linux/phy/phy.h>
>   #include <linux/platform_device.h>
>   #include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
>   #include <linux/reset.h>
>   
>   #include "../pci.h"
> @@ -205,6 +207,7 @@ struct mtk_pcie_port {
>    * struct mtk_pcie - PCIe host information
>    * @dev: pointer to PCIe device
>    * @base: IO mapped register base
> + * @cfg: IO mapped register map for PCIe config
>    * @free_ck: free-run reference clock
>    * @mem: non-prefetchable memory resource
>    * @ports: pointer to PCIe port information
> @@ -213,6 +216,7 @@ struct mtk_pcie_port {
>   struct mtk_pcie {
>   	struct device *dev;
>   	void __iomem *base;
> +	struct regmap *cfg;
>   	struct clk *free_ck;
>   
>   	struct list_head ports;
> @@ -648,7 +652,7 @@ static int mtk_pcie_setup_irq(struct mtk_pcie_port *port,
>   		return err;
>   	}
>   
> -	port->irq = platform_get_irq(pdev, port->slot);
> +	port->irq = platform_get_irq_byname(pdev, "pcie_irq");
>   	if (port->irq < 0)
>   		return port->irq;

You will need to make sure taht the driver keeps working with the old DTS 
format. This is not the case here.

Regards,
Matthias

>   
> @@ -674,12 +678,11 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
>   	if (!mem)
>   		return -EINVAL;
>   
> -	/* MT7622 platforms need to enable LTSSM and ASPM from PCIe subsys */
> -	if (pcie->base) {
> -		val = readl(pcie->base + PCIE_SYS_CFG_V2);
> -		val |= PCIE_CSR_LTSSM_EN(port->slot) |
> -		       PCIE_CSR_ASPM_L1_EN(port->slot);
> -		writel(val, pcie->base + PCIE_SYS_CFG_V2);
> +	/* MT7622/MT7629 platforms need to enable LTSSM and ASPM. */
> +	if (pcie->cfg) {
> +		val = PCIE_CSR_LTSSM_EN(port->slot) |
> +		      PCIE_CSR_ASPM_L1_EN(port->slot);
> +		regmap_update_bits(pcie->cfg, PCIE_SYS_CFG_V2, val, val);
>   	}
>   
>   	/* Assert all reset signals */
> @@ -983,6 +986,7 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie)
>   	struct device *dev = pcie->dev;
>   	struct platform_device *pdev = to_platform_device(dev);
>   	struct resource *regs;
> +	struct device_node *cfg_node;
>   	int err;
>   
>   	/* get shared registers, which are optional */
> @@ -995,6 +999,13 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie)
>   		}
>   	}
>   
> +	cfg_node = of_parse_phandle(dev->of_node, "mediatek,pcie-cfg", 0);
> +	if (cfg_node) {
> +		pcie->cfg = syscon_node_to_regmap(cfg_node);
> +		if (IS_ERR(pcie->cfg))
> +			return PTR_ERR(pcie->cfg);
> +	}
> +
>   	pcie->free_ck = devm_clk_get(dev, "free_ck");
>   	if (IS_ERR(pcie->free_ck)) {
>   		if (PTR_ERR(pcie->free_ck) == -EPROBE_DEFER)
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-09-10 10:45 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-10  6:11 [PATCH v5 0/4] Spilt PCIe node to comply with hardware design Chuanjia Liu
2020-09-10  6:11 ` [PATCH v5 1/4] dt-bindings: pci: mediatek: Modified the Device tree bindings Chuanjia Liu
2020-09-11 22:47   ` Rob Herring
2020-09-13  2:50     ` Chuanjia Liu
2020-09-11 22:50   ` Rob Herring
2020-09-13  2:54     ` Chuanjia Liu
2020-09-10  6:11 ` [PATCH v5 2/4] PCI: mediatek: Use regmap to get shared pcie-cfg base Chuanjia Liu
2020-09-10 10:44   ` Matthias Brugger [this message]
2020-09-13  2:46     ` Chuanjia Liu
2020-09-10  6:11 ` [PATCH v5 3/4] arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622 Chuanjia Liu
2020-09-10  6:11 ` [PATCH v5 4/4] ARM: dts: mediatek: Modified MT7629 PCIe node Chuanjia Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b627b938-2210-16d2-1682-3c25506e30f3@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=chuanjia.liu@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=frank-w@public-files.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=ryder.lee@mediatek.com \
    --cc=yong.wu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).