From: Baruch Siach <baruch@tkos.co.il>
To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>
Cc: Baruch Siach <baruch@tkos.co.il>,
linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Kathiravan T <kathirav@codeaurora.org>,
Andy Gross <agross@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] phy: qcom-qusb2: add QUSB2 support for IPQ6018
Date: Wed, 27 Jan 2021 16:20:27 +0200 [thread overview]
Message-ID: <b8c22dddf1f70d89e135fe1ae705ddc68e295ebb.1611756920.git.baruch@tkos.co.il> (raw)
In-Reply-To: <cover.1611756920.git.baruch@tkos.co.il>
From: Kathiravan T <kathirav@codeaurora.org>
Add the phy init sequence for the Super Speed ports found
on IPQ6018.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
[baruch: add ipq6018_regs_layout[], drop binding change]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 44 +++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 719e0888ed87..8f1bf7e2186b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -22,6 +22,7 @@
#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#define QUSB2PHY_PLL 0x0
#define QUSB2PHY_PLL_TEST 0x04
#define CLK_REF_SEL BIT(7)
@@ -135,6 +136,35 @@ enum qusb2phy_reg_layout {
QUSB2PHY_INTR_CTRL,
};
+static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xF8),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
+};
+
+static const unsigned int ipq6018_regs_layout[] = {
+ [QUSB2PHY_PLL_STATUS] = 0x38,
+ [QUSB2PHY_PORT_TUNE1] = 0x80,
+ [QUSB2PHY_PORT_TUNE2] = 0x84,
+ [QUSB2PHY_PORT_TUNE3] = 0x88,
+ [QUSB2PHY_PORT_TUNE4] = 0x8C,
+ [QUSB2PHY_PORT_TUNE5] = 0x90,
+ [QUSB2PHY_PORT_TEST1] = 0x98,
+ [QUSB2PHY_PORT_TEST2] = 0x9C,
+ [QUSB2PHY_PORT_POWERDOWN] = 0xB4,
+ [QUSB2PHY_INTR_CTRL] = 0xBC,
+};
+
static const unsigned int msm8996_regs_layout[] = {
[QUSB2PHY_PLL_STATUS] = 0x38,
[QUSB2PHY_PORT_TUNE1] = 0x80,
@@ -275,6 +305,17 @@ static const struct qusb2_phy_cfg msm8998_phy_cfg = {
.update_tune1_with_efuse = true,
};
+static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
+ .tbl = ipq6018_init_tbl,
+ .tbl_num = ARRAY_SIZE(ipq6018_init_tbl),
+ .regs = ipq6018_regs_layout,
+
+ .disable_ctrl = POWER_DOWN,
+ .mask_core_ready = PLL_LOCKED,
+ /* autoresume not used */
+ .autoresume_en = BIT(0),
+};
+
static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
.tbl = qusb2_v2_init_tbl,
.tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl),
@@ -833,6 +874,9 @@ static const struct phy_ops qusb2_phy_gen_ops = {
static const struct of_device_id qusb2_phy_of_match_table[] = {
{
+ .compatible = "qcom,ipq6018-qusb2-phy",
+ .data = &ipq6018_phy_cfg,
+ }, {
.compatible = "qcom,ipq8074-qusb2-phy",
.data = &msm8996_phy_cfg,
}, {
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-27 15:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-27 14:20 [PATCH 0/3] phy: qualcomm: support IPQ60xx USB PHY Baruch Siach
2021-01-27 14:20 ` Baruch Siach [this message]
2021-01-27 14:20 ` [PATCH 2/3] dt-bindings: phy: qcom, qusb2: document ipq6018 compatible Baruch Siach
2021-01-27 14:20 ` [PATCH 3/3] arm64: dts: ipq6018: enable USB2 support Baruch Siach
[not found] ` <ebdc1f5c424968a8e1b5463b29f616cf@codeaurora.org>
2021-02-07 9:08 ` Baruch Siach
2021-02-04 7:50 ` [PATCH 0/3] phy: qualcomm: support IPQ60xx USB PHY Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b8c22dddf1f70d89e135fe1ae705ddc68e295ebb.1611756920.git.baruch@tkos.co.il \
--to=baruch@tkos.co.il \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=kathirav@codeaurora.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).