Re: [PATCH v7 3/5] arm64: dts: mt8173: fix unit name warnings

[Matthias Brugger <matthias.bgg@gmail.com>]

On 10/02/2020 07:35, Hsin-Yi Wang wrote:
> Fixing several unit name warnings:
> 
> Warning (unit_address_vs_reg): /oscillator@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /oscillator@1: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /oscillator@2: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@1: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/cpu_crit@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@1: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /reserved-memory/vpu_dma_mem_region: node has a reg or ranges property, but no unit name
> Warning (simple_bus_reg): /soc/pinctrl@10005000: simple-bus unit address format error, expected "1000b000"
> Warning (simple_bus_reg): /soc/interrupt-controller@10220000: simple-bus unit address format error, expected "10221000"
> Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi | 38 ++++++++++++------------
>  1 file changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 790cd64aa447..2b7f566fb407 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -42,14 +42,14 @@ aliases {
>  		dpi0 = &dpi0;
>  		dsi0 = &dsi0;
>  		dsi1 = &dsi1;
> -		mdp_rdma0 = &mdp_rdma0;
> -		mdp_rdma1 = &mdp_rdma1;
> -		mdp_rsz0 = &mdp_rsz0;
> -		mdp_rsz1 = &mdp_rsz1;
> -		mdp_rsz2 = &mdp_rsz2;
> -		mdp_wdma0 = &mdp_wdma0;
> -		mdp_wrot0 = &mdp_wrot0;
> -		mdp_wrot1 = &mdp_wrot1;
> +		mdp-rdma0 = &mdp_rdma0;
> +		mdp-rdma1 = &mdp_rdma1;
> +		mdp-rsz0 = &mdp_rsz0;
> +		mdp-rsz1 = &mdp_rsz1;
> +		mdp-rsz2 = &mdp_rsz2;
> +		mdp-wdma0 = &mdp_wdma0;
> +		mdp-wrot0 = &mdp_wrot0;
> +		mdp-wrot1 = &mdp_wrot1;

Won't we need to update the mdp driver as well, as it uses of_alias_get_id()?

>  		serial0 = &uart0;
>  		serial1 = &uart1;
>  		serial2 = &uart2;
> @@ -246,21 +246,21 @@ psci {
>  		cpu_on	      = <0x84000003>;
>  	};
>  
> -	clk26m: oscillator@0 {
> +	clk26m: oscillator0 {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
>  		clock-frequency = <26000000>;
>  		clock-output-names = "clk26m";
>  	};
>  
> -	clk32k: oscillator@1 {
> +	clk32k: oscillator1 {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
>  		clock-frequency = <32000>;
>  		clock-output-names = "clk32k";
>  	};
>  
> -	cpum_ck: oscillator@2 {
> +	cpum_ck: oscillator2 {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
>  		clock-frequency = <0>;
> @@ -276,19 +276,19 @@ cpu_thermal: cpu_thermal {
>  			sustainable-power = <1500>; /* milliwatts */
>  
>  			trips {
> -				threshold: trip-point@0 {
> +				threshold: trip-point0 {
>  					temperature = <68000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				target: trip-point@1 {
> +				target: trip-point1 {
>  					temperature = <85000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu_crit: cpu_crit@0 {
> +				cpu_crit: cpu_crit0 {
>  					temperature = <115000>;
>  					hysteresis = <2000>;
>  					type = "critical";
> @@ -296,13 +296,13 @@ cpu_crit: cpu_crit@0 {
>  			};
>  
>  			cooling-maps {
> -				map@0 {
> +				map0 {
>  					trip = <&target>;
>  					cooling-device = <&cpu0 0 0>,
>  							 <&cpu1 0 0>;
>  					contribution = <3072>;
>  				};
> -				map@1 {
> +				map1 {
>  					trip = <&target>;
>  					cooling-device = <&cpu2 0 0>,
>  							 <&cpu3 0 0>;
> @@ -316,7 +316,7 @@ reserved-memory {
>  		#address-cells = <2>;
>  		#size-cells = <2>;
>  		ranges;
> -		vpu_dma_reserved: vpu_dma_mem_region {
> +		vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
>  			compatible = "shared-dma-pool";
>  			reg = <0 0xb7000000 0 0x500000>;
>  			alignment = <0x1000>;
> @@ -368,7 +368,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 {
>  			reg = <0 0x10005000 0 0x1000>;
>  		};
>  
> -		pio: pinctrl@10005000 {
> +		pio: pinctrl@1000b000 {
>  			compatible = "mediatek,mt8173-pinctrl";
>  			reg = <0 0x1000b000 0 0x1000>;
>  			mediatek,pctl-regmap = <&syscfg_pctl_a>;
> @@ -575,7 +575,7 @@ mipi_tx1: mipi-dphy@10216000 {
>  			status = "disabled";
>  		};
>  
> -		gic: interrupt-controller@10220000 {
> +		gic: interrupt-controller@10221000 {
>  			compatible = "arm,gic-400";
>  			#interrupt-cells = <3>;
>  			interrupt-parent = <&gic>;
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel