From: Neha Malcom Francis <n-francis@ti.com>
To: Sinthu Raja <sinthu.raja@mistralsolutions.com>,
Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Sinthu Raja <sinthu.raja@ti.com>
Subject: Re: [PATCH V5 0/3] AM68 SK: Add initial support
Date: Mon, 16 Jan 2023 16:47:57 +0530 [thread overview]
Message-ID: <c7e9d9bb-d3d1-f958-b255-9128751be568@ti.com> (raw)
In-Reply-To: <20230116071446.28867-1-sinthu.raja@ti.com>
Hi Sinthu
On 16/01/23 12:44, Sinthu Raja wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
>
> Hi All,
> This series of patches add support for AM68 Starter kit(SK). AM68 SK
> is a low cost, small form factor board designed for TI’s AM68 SoC.
>
> Refer below link to AM68 Technical Reference Manual for further details:
> http://www.ti.com/lit/pdf/spruj28
>
> Design files can be referrred from https://www.ti.com/lit/zip/SPRR463
>
> Changes in V5:
> =============
> Address review comments:
> - Remove the unessential comment.
> - Remove alignment property from secure-ddr node, as no memory is allocated out
> of this region.
>
> Changes in V4:
> =============
> Repost after rebasing to 6.2 rc1
>
> Changes in V3:
> ==============
> Address all the review comments and the changes are captured in separate patches.
> - Remove the unused nodes that are disabled by default.
> - Update the gpio regulator node: gpio-regulator-tlv to "regulator-tlv".
>
> V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-1-sinthu.raja@ti.com/t/#mbe43b02221733bb6eb06b203359e90ec08406afc
> V2: https://lore.kernel.org/lkml/20221107123852.8063-1-sinthu.raja@ti.com/
> V3: https://lore.kernel.org/lkml/20230110110052.14851-1-sinthu.raja@ti.com/
> V4: https://lore.kernel.org/lkml/20230105151740.29436-1-sinthu.raja@ti.com/
>
> Sinthu Raja (3):
> dt-bindings: arm: ti: Add binding for AM68 SK
> arm64: dts: ti: Add initial support for AM68 SK System on Module
> arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
>
> .../devicetree/bindings/arm/ti/k3.yaml | 1 +
> arch/arm64/boot/dts/ti/Makefile | 2 +
> .../boot/dts/ti/k3-am68-sk-base-board.dts | 335 ++++++++++++++++++
> arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 29 ++
> 4 files changed, 367 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
>
For the series:
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
--
Thanking You
Neha Malcom Francis
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-16 11:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-16 7:14 [PATCH V5 0/3] AM68 SK: Add initial support Sinthu Raja
2023-01-16 7:14 ` [PATCH V5 1/3] dt-bindings: arm: ti: Add binding for AM68 SK Sinthu Raja
2023-01-16 7:14 ` [PATCH V5 2/3] arm64: dts: ti: Add initial support for AM68 SK System on Module Sinthu Raja
2023-01-16 14:02 ` Vaishnav Achath
2023-01-16 7:14 ` [PATCH V5 3/3] arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board Sinthu Raja
2023-01-16 14:04 ` Vaishnav Achath
2023-01-16 11:17 ` Neha Malcom Francis [this message]
2023-01-23 17:39 ` [PATCH V5 0/3] AM68 SK: Add initial support Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c7e9d9bb-d3d1-f958-b255-9128751be568@ti.com \
--to=n-francis@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=sinthu.raja@mistralsolutions.com \
--cc=sinthu.raja@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).