On Sat, 2020-05-09 at 12:02 +0200, Stefan Wahren wrote:
> Hi Nicolas,
> 
> Am 07.05.20 um 23:48 schrieb Rob Herring:
> > On Tue,  5 May 2020 18:13:15 +0200, Nicolas Saenz Julienne wrote:
> > > The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip
> > > that implements xHCI. After a PCI reset, VL805's firmware may either be
> > > loaded directly from an EEPROM or, if not present, by the SoC's
> > > co-processor, VideoCore. RPi4's VideoCore OS contains both the non public
> > > firmware load logic and the VL805 firmware blob. The function this patch
> > > introduces triggers the aforementioned process.
> > > 
> > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > > 
> > > ---
> > > 
> > > Change since v7:
> > > - Use usleep_delay()
> > > - Add comment about PCI errors
> > > - Don't wait on error
> > > - Typos
> > > 
> > > Change since v6:
> > > - Add test to avoid loading the firmware when not needed
> > > - Since we have it around, print VL805's firmware version, it'll make
> > > debugging easier in the future
> > > - Correct typos
> > > - Add a clearer view of HW topology in patch description
> > > 
> > > Changes since v4:
> > > - Inline function definition when RASPBERRYPI_FIRMWARE is not defined
> > > 
> > > Changes since v1:
> > > - Move include into .c file and add forward declaration to .h
> > > 
> > >  drivers/firmware/raspberrypi.c             | 61 ++++++++++++++++++++++
> > >  include/soc/bcm2835/raspberrypi-firmware.h |  7 +++
> > >  2 files changed, 68 insertions(+)
> > > 
> > Reviewed-by: Rob Herring <robh@kernel.org>
> 
> i modified the code a little bit for testing, but also successfully
> tested it without my modifications:
> 
> diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
> index 0d1422b..f3f4c2d 100644
> --- a/drivers/firmware/raspberrypi.c
> +++ b/drivers/firmware/raspberrypi.c
> @@ -337,8 +337,10 @@ int rpi_firmware_init_vl805(struct pci_dev *pdev)
>          * further down the line.
>          */
>         pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET,
> &version);
> -       if (version)
> -               goto exit;
> +       if (version) {
> +               pci_info(pdev, "VL805 EEPROM firmware version %08x\n",
> version);
> +               return 0;
> +       }
>  
>         dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 |
>                    PCI_FUNC(pdev->devfn) << 12;
> @@ -353,9 +355,8 @@ int rpi_firmware_init_vl805(struct pci_dev *pdev)
>  
>         pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET,
>                               &version);
> -exit:
> -       pci_info(pdev, "VL805 firmware version %08x\n", version);
>  
> +       pci_info(pdev, "VL805 RAM firmware version %08x\n", version);
>         return 0;
>  }
>  EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805);
> 
> Here are the my results with 3x Raspberry Pi 4:
> 
> VL805 EEPROM firmware version 000137ad
> VL805 EEPROM firmware version 00013701
> VL805 RAM firmware version 000137ad
> 
> So the whole patch series is:
> 
> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>

Thanks for taking the time!

Regards,
Nicolas