Re: [PATCH 16/16] soc: imx: gpcv2: remove waiting handshake in power up

["Peng Fan (OSS)" <peng.fan@oss.nxp.com>]

On 2021/4/29 22:34, Lucas Stach wrote:
> Am Donnerstag, dem 29.04.2021 um 15:30 +0800 schrieb Peng Fan (OSS):
>> From: Peng Fan <peng.fan@nxp.com>
>>
>> i.MX8MM has blk ctl module, the handshake can only finish after setting
>> blk ctl. The blk ctl driver will set the bus clk bit and the handshake
>> will finish there. we just add a delay and suppose the handshake will
>> finish after that.
> 
> Instead of this patch, just drop patch 05/16 from this series. I think
> we should leave a comment in the code on why we aren't waiting for the
> handshake ack, as this is non-obvious from looking at the driver code.
> 
> Basically add a polished version of the commit log from this patch into
> the driver code.

I see. Will do it in V2.

Thanks,
Peng.

> 
> Regards,
> Lucas
> 
>> Signed-off-by: Peng Fan <peng.fan@nxp.com>
>> ---
>>   drivers/soc/imx/gpcv2.c | 8 --------
>>   1 file changed, 8 deletions(-)
>>
>> diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
>> index 49dd137f6b94..04564017bfe9 100644
>> --- a/drivers/soc/imx/gpcv2.c
>> +++ b/drivers/soc/imx/gpcv2.c
>> @@ -251,14 +251,6 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
>>   		regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
>>   				   domain->bits.hskreq, domain->bits.hskreq);
>>   
>>
>>
>>
>> -		ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PWRHSK,
>> -					       reg_val,
>> -					       (reg_val & domain->bits.hskack),
>> -					       0, USEC_PER_MSEC);
>> -		if (ret) {
>> -			dev_err(domain->dev, "failed to power up ADB400\n");
>> -			goto out_clk_disable;
>> -		}
>>   	}
>>   
>>
>>
>>
>>   	/* Disable reset clocks for all devices in the domain */
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel