Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: leonard.crestez@nxp.com (Leonard Crestez)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] PCI: imx: Add support for i.MX8MQ
Date: Tue, 20 Nov 2018 10:48:59 +0000
Message-ID: <ce2ac1a880ce2a7a39f0e42b5059676daa748e52.camel@nxp.com> (raw)
In-Reply-To: <20181117181225.10737-4-andrew.smirnov@gmail.com>

On Sat, 2018-11-17 at 10:12 -0800, Andrey Smirnov wrote:
> @@ -921,7 +1004,28 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> -	case IMX7D:
> +	case IMX8MQ:
> +		if (of_property_read_u32(node, "fsl,iomux-gpr1x",
> +					 &imx6_pcie->gpr1x)) {
> +			dev_err(dev, "Failed to get GPR1x address\n");
> +			return -EINVAL;
> +		}

This is for distinguishing multiple controllers on the SOC but other
registers and bits might differ. Isn't it preferable to have a property
for controller id instead of adding many registers to DT?

> +
> +		if (of_property_read_u32_array(
> +			    node, "fsl,gpr12-device-type",
> +			    imx6_pcie->device_type,
> +			    ARRAY_SIZE(imx6_pcie->device_type))) {
> +			dev_err(dev, "Failed to get device type
> mask/value\n");
> +			return -EINVAL;
> +		}

The device type can be set on multiple SOCs, why are you adding a
mandatory property only for 8m?

There should probably be a separate patch with documented DT bindings.

--
Regards,
Leonard

  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-17 18:12 [PATCH 0/3] PCIE " andrew.smirnov
2018-11-17 18:12 ` [PATCH 1/3] PCI: imx: No-op imx6_setup_phy_mpll() on i.MX7D andrew.smirnov
2018-11-17 18:12 ` [PATCH 2/3] PCI: imx: No-op imx6_pcie_reset_phy() " andrew.smirnov
2018-11-20  1:22   ` tpiepho
2018-11-26 18:32     ` andrew.smirnov
2018-11-17 18:12 ` [PATCH 3/3] PCI: imx: Add support for i.MX8MQ andrew.smirnov
2018-11-19  7:07   ` hongxing.zhu
2018-11-26 18:09     ` andrew.smirnov
2018-11-29 10:52       ` hongxing.zhu
2018-11-20 10:48   ` leonard.crestez [this message]
2018-11-26 18:24     ` andrew.smirnov
2018-11-27 10:06       ` l.stach
2018-11-27 10:46         ` leonard.crestez
2018-11-27 21:14           ` andrew.smirnov
2018-11-28 10:55             ` leonard.crestez
2018-11-29 11:15               ` l.stach
2018-11-29 11:12             ` l.stach
2018-11-27 10:16       ` leonard.crestez
2018-11-27 21:03         ` andrew.smirnov
2018-12-03 12:20 ` [PATCH 0/3] PCIE " Lorenzo Pieralisi
2018-12-07 11:37 ` Lorenzo Pieralisi

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ce2ac1a880ce2a7a39f0e42b5059676daa748e52.camel@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox