linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Stephen Boyd <sboyd@kernel.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
	"Artur Świgoń" <a.swigon@partner.samsung.com>,
	"Jacky Bai" <ping.bai@nxp.com>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Angus Ainslie" <angus@akkea.ca>,
	"Alexandre Bailon" <abailon@baylibre.com>,
	linux-clk@vger.kernel.org, "Abel Vesa" <abel.vesa@nxp.com>,
	"Saravana Kannan" <saravanak@google.com>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Chanwoo Choi" <cw00.choi@samsung.com>,
	"Matthias Kaehlcke" <mka@chromium.org>,
	linux-imx@nxp.com, devicetree@vger.kernel.org,
	linux-pm@vger.kernel.org, "Martin Kepplinger" <martink@posteo.de>,
	linux-arm-kernel@lists.infradead.org,
	"Dong Aisheng" <aisheng.dong@nxp.com>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	kernel@pengutronix.de, "Fabio Estevam" <fabio.estevam@nxp.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Georgi Djakov" <georgi.djakov@linaro.org>
Subject: [PATCH v4 6/6] arm64: dts: imx8m: Add ddr controller nodes
Date: Sat,  9 Nov 2019 00:39:56 +0200	[thread overview]
Message-ID: <cfaee2ac845b07497a25f688915b60c9bb7c7ac1.1573252696.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1573252696.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1573252696.git.leonard.crestez@nxp.com>

This is used by the imx-ddrc devfreq driver to implement dynamic
frequency scaling of DRAM.

Add a devfreq-event link to the dram PMU in order to support on-demand
scaling of ddrc based on measured dram bandwidth usage.

Support for proactive scaling via interconnect will come later. The
high-performance bus masters which need that (display, vpu, gpu) are not
yet enabled in upstream anyway.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dts  | 18 ++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mm.dtsi     | 13 +++++++++-
 .../boot/dts/freescale/imx8mn-ddr4-evk.dts    | 18 ++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mn.dtsi     | 13 +++++++++-
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts  | 24 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 13 +++++++++-
 6 files changed, 96 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 28ab17a277bb..ecf0d385c164 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -75,10 +75,28 @@
 
 &A53_0 {
 	cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 6edbdfe2d0d7..0fffc6362c43 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -856,11 +856,22 @@
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		ddr-pmu@3d800000 {
+		ddrc: dram-controller@3d400000 {
+			compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+				 <&clk IMX8MM_DRAM_PLL>,
+				 <&clk IMX8MM_CLK_DRAM_ALT>,
+				 <&clk IMX8MM_CLK_DRAM_APB>;
+			devfreq-events = <&ddr_pmu>;
+		};
+
+		ddr_pmu: ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 071949412caf..b051c927c11e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -15,10 +15,28 @@
 
 &A53_0 {
 	cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp-600M {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
 &i2c1 {
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
 		pinctrl-0 = <&pinctrl_pmic>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index e91625063f8e..c952bfb906a7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -757,11 +757,22 @@
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		ddr-pmu@3d800000 {
+		ddrc: dram-controller@3d400000 {
+			compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MN_CLK_DRAM_CORE>,
+				 <&clk IMX8MN_DRAM_PLL>,
+				 <&clk IMX8MN_CLK_DRAM_ALT>,
+				 <&clk IMX8MN_CLK_DRAM_APB>;
+			devfreq-events = <&ddr_pmu>;
+		};
+
+		ddr_pmu: ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index c36685916683..ee6dc5f07622 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -103,10 +103,34 @@
 
 &A53_3 {
 	cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		/*
+		 * On imx8mq B0 PLL can't be bypassed so low bus is 166M
+		 */
+		opp-166M {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+		opp-800M {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 7f9319452b58..d2270e99098e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1111,11 +1111,22 @@
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 		};
 
-		ddr-pmu@3d800000 {
+		ddrc: dram-controller@3d400000 {
+			compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
+				 <&clk IMX8MQ_DRAM_PLL_OUT>,
+				 <&clk IMX8MQ_CLK_DRAM_ALT>,
+				 <&clk IMX8MQ_CLK_DRAM_APB>;
+			devfreq-events = <&ddr_pmu>;
+		};
+
+		ddr_pmu: ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 		};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-11-08 22:41 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-08 22:39 [PATCH v4 0/6] PM / devfreq: Add dynamic scaling for imx8m ddr controller Leonard Crestez
2019-11-08 22:39 ` [PATCH v4 1/6] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocks Leonard Crestez
2019-11-12 11:18   ` Abel Vesa
2019-11-12 13:43     ` Leonard Crestez
2019-11-12 15:10       ` Abel Vesa
2019-11-08 22:39 ` [PATCH v4 2/6] clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHE Leonard Crestez
2019-11-12 11:18   ` Abel Vesa
2019-11-08 22:39 ` [PATCH v4 3/6] dt-bindings: memory: Add bindings for imx8m ddr controller Leonard Crestez
2019-11-08 22:39 ` [PATCH v4 4/6] PM / devfreq: Add dynamic scaling " Leonard Crestez
2019-11-11  3:23   ` Chanwoo Choi
2019-11-11 17:23     ` Leonard Crestez
2019-11-12  1:00       ` Chanwoo Choi
2019-11-12 14:47         ` Leonard Crestez
2019-11-08 22:39 ` [PATCH v4 5/6] PM / devfreq: imx8m-ddrc: Measure bandwidth with perf Leonard Crestez
2019-11-11  5:18   ` Chanwoo Choi
2019-11-12 13:17     ` Leonard Crestez
2019-11-13  1:43       ` Chanwoo Choi
2019-11-08 22:39 ` Leonard Crestez [this message]
     [not found] ` <20200622135858.15891-1-martin.kepplinger@puri.sm>
2020-06-24  6:08   ` [PATCH v4 0/6] PM / devfreq: Add dynamic scaling for imx8m ddr controller Leonard Crestez
2020-06-25  6:57     ` Martin Kepplinger
2020-06-25 14:47       ` Abel Vesa
2020-06-29  6:32         ` Martin Kepplinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cfaee2ac845b07497a25f688915b60c9bb7c7ac1.1573252696.git.leonard.crestez@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=Anson.Huang@nxp.com \
    --cc=a.swigon@partner.samsung.com \
    --cc=abailon@baylibre.com \
    --cc=abel.vesa@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=angus@akkea.ca \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=georgi.djakov@linaro.org \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=martink@posteo.de \
    --cc=mka@chromium.org \
    --cc=mturquette@baylibre.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=ping.bai@nxp.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=saravanak@google.com \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).