From: Matthias Brugger <matthias.bgg@gmail.com>
To: Mason Zhang <Mason.Zhang@mediatek.com>, Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
hanks.chen@mediateka.com, wsd_upstream@mediatek.com
Subject: Re: [PATCH 1/2] arm64: dts: mediatek: add MT6779 spi master dts node
Date: Mon, 29 Mar 2021 17:50:33 +0200 [thread overview]
Message-ID: <d3666864-cb46-755c-0d0d-d05ac9af0379@gmail.com> (raw)
In-Reply-To: <20210226105918.3057-1-Mason.Zhang@mediatek.com>
On 26/02/2021 11:59, Mason Zhang wrote:
> this patch add spi master dts node for mt6779 SOC.
>
> Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt6779.dtsi | 96 ++++++++++++++++++++++++
> 1 file changed, 96 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> index 370f309d32de..ca72eb09cff9 100644
> --- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> @@ -219,6 +219,102 @@
> status = "disabled";
> };
>
> + spi0: spi0@1100a000 {
> + compatible = "mediatek,mt6779-spi",
> + "mediatek,mt6765-spi";
> + mediatek,pad-select = <0>;
> + reg = <0 0x1100a000 0 0x1000>;
> + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW 0>;
> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D2>,
> + <&topckgen CLK_TOP_SPI>,
> + <&infracfg_ao CLK_INFRA_SPI0>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + };
Please also update binding description accordingling and add as another patch. I
wasn't able to find a 2/2 neither. I foudn v1 2/2 which on a quick look seemed
the same as this patch.
Regards,
Matthias
> +
> + spi1: spi1@11010000 {
> + compatible = "mediatek,mt6779-spi",
> + "mediatek,mt6765-spi";
> + mediatek,pad-select = <0>;
> + reg = <0 0x11010000 0 0x1000>;
> + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW 0>;
> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D2>,
> + <&topckgen CLK_TOP_SPI>,
> + <&infracfg_ao CLK_INFRA_SPI1>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + };
> +
> + spi2: spi2@11012000 {
> + compatible = "mediatek,mt6779-spi",
> + "mediatek,mt6765-spi";
> + mediatek,pad-select = <0>;
> + reg = <0 0x11012000 0 0x1000>;
> + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW 0>;
> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D2>,
> + <&topckgen CLK_TOP_SPI>,
> + <&infracfg_ao CLK_INFRA_SPI2>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + };
> +
> + spi3: spi3@11013000 {
> + compatible = "mediatek,mt6779-spi",
> + "mediatek,mt6765-spi";
> + mediatek,pad-select = <0>;
> + reg = <0 0x11013000 0 0x1000>;
> + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW 0>;
> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D2>,
> + <&topckgen CLK_TOP_SPI>,
> + <&infracfg_ao CLK_INFRA_SPI3>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + };
> +
> + spi4: spi4@11018000 {
> + compatible = "mediatek,mt6779-spi",
> + "mediatek,mt6765-spi";
> + mediatek,pad-select = <0>;
> + reg = <0 0x11018000 0 0x1000>;
> + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW 0>;
> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D2>,
> + <&topckgen CLK_TOP_SPI>,
> + <&infracfg_ao CLK_INFRA_SPI4>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + };
> +
> + spi5: spi5@11019000 {
> + compatible = "mediatek,mt6779-spi",
> + "mediatek,mt6765-spi";
> + mediatek,pad-select = <0>;
> + reg = <0 0x11019000 0 0x1000>;
> + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW 0>;
> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D2>,
> + <&topckgen CLK_TOP_SPI>,
> + <&infracfg_ao CLK_INFRA_SPI5>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + };
> +
> + spi6: spi6@1101d000 {
> + compatible = "mediatek,mt6779-spi",
> + "mediatek,mt6765-spi";
> + mediatek,pad-select = <0>;
> + reg = <0 0x1101d000 0 0x1000>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW 0>;
> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D2>,
> + <&topckgen CLK_TOP_SPI>,
> + <&infracfg_ao CLK_INFRA_SPI6>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + };
> +
> + spi7: spi7@1101e000 {
> + compatible = "mediatek,mt6779-spi",
> + "mediatek,mt6765-spi";
> + mediatek,pad-select = <0>;
> + reg = <0 0x1101e000 0 0x1000>;
> + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW 0>;
> + clocks = <&topckgen CLK_TOP_MAINPLL_D5_D2>,
> + <&topckgen CLK_TOP_SPI>,
> + <&infracfg_ao CLK_INFRA_SPI7>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + };
> +
> audio: clock-controller@11210000 {
> compatible = "mediatek,mt6779-audio", "syscon";
> reg = <0 0x11210000 0 0x1000>;
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-29 23:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-26 10:59 [PATCH 1/2] arm64: dts: mediatek: add MT6779 spi master dts node Mason Zhang
2021-03-01 2:01 ` Mason Zhang
2021-03-22 11:28 ` Mason Zhang
2021-03-29 15:50 ` Matthias Brugger [this message]
2021-04-07 8:49 ` Mason Zhang
2021-04-07 11:17 ` Matthias Brugger
2021-04-09 2:27 ` Mason Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d3666864-cb46-755c-0d0d-d05ac9af0379@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=Mason.Zhang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=hanks.chen@mediateka.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).