linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Julien Thierry <julien.thierry@arm.com>
To: Andrew Murray <andrew.murray@arm.com>,
	Christoffer Dall <christoffer.dall@arm.com>,
	Marc Zyngier <marc.zyngier@arm.com>
Cc: James Morse <james.morse@arm.com>,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org,
	Suzuki K Pouloze <suzuki.poulose@arm.com>
Subject: Re: [PATCH v7 5/5] KVM: arm/arm64: support chained PMU counters
Date: Tue, 21 May 2019 17:46:28 +0100	[thread overview]
Message-ID: <d6e0efaa-162c-e606-54e9-cfe74b228bf4@arm.com> (raw)
In-Reply-To: <20190521155228.903-6-andrew.murray@arm.com>

Hi Andrew,

On 05/21/2019 04:52 PM, Andrew Murray wrote:
> ARMv8 provides support for chained PMU counters, where an event type
> of 0x001E is set for odd-numbered counters, the event counter will
> increment by one for each overflow of the preceding even-numbered
> counter. Let's emulate this in KVM by creating a 64 bit perf counter
> when a user chains two emulated counters together.
> 
> For chained events we only support generating an overflow interrupt
> on the high counter. We use the attributes of the low counter to
> determine the attributes of the perf event.
> 
> Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Andrew Murray <andrew.murray@arm.com>
> ---
>  include/kvm/arm_pmu.h |   2 +
>  virt/kvm/arm/pmu.c    | 246 ++++++++++++++++++++++++++++++++++++------
>  2 files changed, 215 insertions(+), 33 deletions(-)
> 
> diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
> index b73f31baca52..8b434745500a 100644
> --- a/include/kvm/arm_pmu.h
> +++ b/include/kvm/arm_pmu.h
> @@ -22,6 +22,7 @@
>  #include <asm/perf_event.h>
>  
>  #define ARMV8_PMU_CYCLE_IDX		(ARMV8_PMU_MAX_COUNTERS - 1)
> +#define ARMV8_PMU_MAX_COUNTER_PAIRS	((ARMV8_PMU_MAX_COUNTERS + 1) >> 1)
>  
>  #ifdef CONFIG_KVM_ARM_PMU
>  
> @@ -34,6 +35,7 @@ struct kvm_pmc {
>  struct kvm_pmu {
>  	int irq_num;
>  	struct kvm_pmc pmc[ARMV8_PMU_MAX_COUNTERS];
> +	DECLARE_BITMAP(chained, ARMV8_PMU_MAX_COUNTER_PAIRS);
>  	bool ready;
>  	bool created;
>  	bool irq_level;
> diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c
> index ae1e886d4a1a..4b0981c402c6 100644
> --- a/virt/kvm/arm/pmu.c
> +++ b/virt/kvm/arm/pmu.c
> @@ -25,28 +25,128 @@
>  #include <kvm/arm_vgic.h>
>  
>  static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx);
> +
> +#define PERF_ATTR_CFG1_KVM_PMU_CHAINED 0x1
> +
> +static struct kvm_vcpu *kvm_pmc_to_vcpu(struct kvm_pmc *pmc)
> +{
> +	struct kvm_pmu *pmu;
> +	struct kvm_vcpu_arch *vcpu_arch;
> +
> +	pmc -= pmc->idx;
> +	pmu = container_of(pmc, struct kvm_pmu, pmc[0]);
> +	vcpu_arch = container_of(pmu, struct kvm_vcpu_arch, pmu);
> +	return container_of(vcpu_arch, struct kvm_vcpu, arch);
> +}
> +
>  /**
> - * kvm_pmu_get_counter_value - get PMU counter value
> + * kvm_pmu_pmc_is_chained - determine if the pmc is chained
> + * @pmc: The PMU counter pointer
> + */
> +static bool kvm_pmu_pmc_is_chained(struct kvm_pmc *pmc)
> +{
> +	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
> +
> +	return test_bit(pmc->idx >> 1, vcpu->arch.pmu.chained);
> +}
> +
> +/**
> + * kvm_pmu_pmc_is_high_counter - determine if select_idx is a high/low counter
> + * @select_idx: The counter index
> + */
> +static bool kvm_pmu_pmc_is_high_counter(u64 select_idx)
> +{
> +	return select_idx & 0x1;
> +}
> +
> +/**
> + * kvm_pmu_get_canonical_pmc - obtain the canonical pmc
> + * @pmc: The PMU counter pointer
> + *
> + * When a pair of PMCs are chained together we use the low counter (canonical)
> + * to hold the underlying perf event.
> + */
> +static struct kvm_pmc *kvm_pmu_get_canonical_pmc(struct kvm_pmc *pmc)
> +{
> +	if (kvm_pmu_pmc_is_chained(pmc) &&
> +	    kvm_pmu_pmc_is_high_counter(pmc->idx))
> +		return pmc - 1;
> +
> +	return pmc;
> +}
> +
> +/**
> + * kvm_pmu_idx_has_chain_evtype - determine if the event type is chain
>   * @vcpu: The vcpu pointer
>   * @select_idx: The counter index
>   */
> -u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx)
> +static bool kvm_pmu_idx_has_chain_evtype(struct kvm_vcpu *vcpu, u64 select_idx)
>  {
> -	u64 counter, reg, enabled, running;
> -	struct kvm_pmu *pmu = &vcpu->arch.pmu;
> -	struct kvm_pmc *pmc = &pmu->pmc[select_idx];
> +	u64 eventsel, reg;
>  
> -	reg = (select_idx == ARMV8_PMU_CYCLE_IDX)
> -	      ? PMCCNTR_EL0 : PMEVCNTR0_EL0 + select_idx;
> -	counter = __vcpu_sys_reg(vcpu, reg);
> +	select_idx |= 0x1;
> +
> +	if (select_idx == ARMV8_PMU_CYCLE_IDX)
> +		return false;
> +
> +	reg = PMEVTYPER0_EL0 + select_idx;
> +	eventsel = __vcpu_sys_reg(vcpu, reg) & ARMV8_PMU_EVTYPE_EVENT;
> +
> +	return armv8pmu_evtype_is_chain(eventsel);
> +}
> +
> +/**
> + * kvm_pmu_get_pair_counter_value - get PMU counter value
> + * @vcpu: The vcpu pointer
> + * @pmc: The PMU counter pointer
> + */
> +static u64 kvm_pmu_get_pair_counter_value(struct kvm_vcpu *vcpu,
> +					  struct kvm_pmc *pmc)
> +{
> +	u64 counter, counter_high, reg, enabled, running;
> +
> +	if (kvm_pmu_pmc_is_chained(pmc)) {
> +		pmc = kvm_pmu_get_canonical_pmc(pmc);
> +		reg = PMEVCNTR0_EL0 + pmc->idx;
> +
> +		counter = __vcpu_sys_reg(vcpu, reg);
> +		counter_high = __vcpu_sys_reg(vcpu, reg + 1);
> +
> +		counter = lower_32_bits(counter) | (counter_high << 32);
> +	} else {
> +		reg = (pmc->idx == ARMV8_PMU_CYCLE_IDX)
> +		      ? PMCCNTR_EL0 : PMEVCNTR0_EL0 + pmc->idx;
> +		counter = __vcpu_sys_reg(vcpu, reg);
> +	}
>  
> -	/* The real counter value is equal to the value of counter register plus
> +	/*
> +	 * The real counter value is equal to the value of counter register plus
>  	 * the value perf event counts.
>  	 */
>  	if (pmc->perf_event)
>  		counter += perf_event_read_value(pmc->perf_event, &enabled,
>  						 &running);
>  
> +	return counter;
> +}
> +
> +/**
> + * kvm_pmu_get_counter_value - get PMU counter value
> + * @vcpu: The vcpu pointer
> + * @select_idx: The counter index
> + */
> +u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx)
> +{
> +	u64 counter;
> +	struct kvm_pmu *pmu = &vcpu->arch.pmu;
> +	struct kvm_pmc *pmc = &pmu->pmc[select_idx];
> +
> +	counter = kvm_pmu_get_pair_counter_value(vcpu, pmc);
> +
> +	if (kvm_pmu_pmc_is_chained(pmc) &&
> +	    kvm_pmu_pmc_is_high_counter(select_idx))
> +		counter >>= 32;
> +
>  	return counter & pmc->bitmask;
>  }
>  
> @@ -74,6 +174,7 @@ void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu, u64 select_idx, u64 val)
>   */
>  static void kvm_pmu_release_perf_event(struct kvm_pmc *pmc)
>  {
> +	pmc = kvm_pmu_get_canonical_pmc(pmc);
>  	if (pmc->perf_event) {
>  		perf_event_disable(pmc->perf_event);
>  		perf_event_release_kernel(pmc->perf_event);
> @@ -91,13 +192,24 @@ static void kvm_pmu_stop_counter(struct kvm_vcpu *vcpu, struct kvm_pmc *pmc)
>  {
>  	u64 counter, reg;
>  
> -	if (pmc->perf_event) {
> +	pmc = kvm_pmu_get_canonical_pmc(pmc);
> +	if (!pmc->perf_event)
> +		return;
> +
> +	if (kvm_pmu_pmc_is_chained(pmc)) {
> +		counter = kvm_pmu_get_pair_counter_value(vcpu, pmc);
> +
> +		reg = PMEVCNTR0_EL0 + pmc->idx;
> +		__vcpu_sys_reg(vcpu, reg) = counter & pmc->bitmask;
> +		__vcpu_sys_reg(vcpu, reg + 1) = (counter >> 32) & pmc->bitmask;
> +	} else {
>  		counter = kvm_pmu_get_counter_value(vcpu, pmc->idx);
>  		reg = (pmc->idx == ARMV8_PMU_CYCLE_IDX)
>  		       ? PMCCNTR_EL0 : PMEVCNTR0_EL0 + pmc->idx;
>  		__vcpu_sys_reg(vcpu, reg) = counter;
> -		kvm_pmu_release_perf_event(pmc);
>  	}
> +
> +	kvm_pmu_release_perf_event(pmc);
>  }
>  
>  /**
> @@ -115,6 +227,8 @@ void kvm_pmu_vcpu_reset(struct kvm_vcpu *vcpu)
>  		pmu->pmc[i].idx = i;
>  		pmu->pmc[i].bitmask = 0xffffffffUL;
>  	}
> +
> +	bitmap_zero(vcpu->arch.pmu.chained, ARMV8_PMU_MAX_COUNTER_PAIRS);
>  }
>  
>  /**
> @@ -154,6 +268,7 @@ void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
>  	int i;
>  	struct kvm_pmu *pmu = &vcpu->arch.pmu;
>  	struct kvm_pmc *pmc;
> +	struct perf_event *perf_event;
>  
>  	if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) || !val)
>  		return;
> @@ -163,9 +278,21 @@ void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
>  			continue;
>  
>  		pmc = &pmu->pmc[i];
> +
> +		/*
> +		 * For high counters of chained events we must recreate the
> +		 * perf event with the long (64bit) attribute set.
> +		 */
> +		if (kvm_pmu_pmc_is_chained(pmc) &&
> +		    kvm_pmu_pmc_is_high_counter(i)) {
> +			kvm_pmu_create_perf_event(vcpu, i);
> +			continue;
> +		}
> +
> +		pmc = kvm_pmu_get_canonical_pmc(pmc);

But pmc is already a canonical pmc, we don't need to call
kvm_pmu_get_canonical_pmc(). The condition above is the same as the one
use in kvm_pmu_get_canonical_pmc(), so no "non canonical" pmc ever
reaches that point. I would understand putting a comment to clarify that
fact.

>  		if (pmc->perf_event) {
>  			perf_event_enable(pmc->perf_event);
> -			if (pmc->perf_event->state != PERF_EVENT_STATE_ACTIVE)
> +			if (perf_event->state != PERF_EVENT_STATE_ACTIVE)

You forgot to set perf_event.

>  				kvm_debug("fail to enable perf event\n");
>  		}
>  	}
> @@ -192,6 +319,18 @@ void kvm_pmu_disable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
>  			continue;
>  
>  		pmc = &pmu->pmc[i];
> +
> +		/*
> +		 * For high counters of chained events we must recreate the
> +		 * perf event with the long (64bit) attribute unset.
> +		 */
> +		if (kvm_pmu_pmc_is_chained(pmc) &&
> +		    kvm_pmu_pmc_is_high_counter(i)) {
> +			kvm_pmu_create_perf_event(vcpu, i);
> +			continue;
> +		}
> +
> +		pmc = kvm_pmu_get_canonical_pmc(pmc);

Same as the enable case, we know pmc is already canonical, no need to
call the function.

Thanks,

-- 
Julien Thierry

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-05-21 16:46 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-21 15:52 [PATCH v7 0/5] KVM: arm/arm64: add support for chained counters Andrew Murray
2019-05-21 15:52 ` [PATCH v7 1/5] KVM: arm/arm64: rename kvm_pmu_{enable/disable}_counter functions Andrew Murray
2019-05-21 15:52 ` [PATCH v7 2/5] KVM: arm/arm64: extract duplicated code to own function Andrew Murray
2019-05-21 15:52 ` [PATCH v7 3/5] KVM: arm/arm64: re-create event when setting counter value Andrew Murray
2019-05-21 15:52 ` [PATCH v7 4/5] arm64: perf: extract chain helper into header Andrew Murray
2019-05-21 16:15   ` Suzuki K Poulose
2019-05-21 15:52 ` [PATCH v7 5/5] KVM: arm/arm64: support chained PMU counters Andrew Murray
2019-05-21 16:31   ` Marc Zyngier
2019-05-22 10:35     ` Andrew Murray
2019-05-22 11:50       ` Marc Zyngier
2019-05-22 13:48         ` Andrew Murray
2019-05-21 16:46   ` Julien Thierry [this message]
2019-05-22  8:55     ` Andrew Murray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d6e0efaa-162c-e606-54e9-cfe74b228bf4@arm.com \
    --to=julien.thierry@arm.com \
    --cc=andrew.murray@arm.com \
    --cc=christoffer.dall@arm.com \
    --cc=james.morse@arm.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=suzuki.poulose@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).