[PATCH v5 2/4] drivers: firmware: xilinx: Add ZynqMP firmware driver

[sudeep.holla@arm.com (Sudeep Holla)]

On 20/02/18 19:21, Jolly Shah wrote:
> This patch is adding communication layer with firmware.
> Firmware driver provides an interface to firmware APIs.
> Interface APIs can be used by any driver to communicate to
> PMUFW(Platform Management Unit). All requests go through ATF.
> 
> Signed-off-by: Jolly Shah <jollys@xilinx.com>
> Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
> ---
>  arch/arm64/Kconfig.platforms                    |    1 +
>  drivers/firmware/Kconfig                        |    1 +
>  drivers/firmware/Makefile                       |    1 +
>  drivers/firmware/xilinx/Kconfig                 |    4 +
>  drivers/firmware/xilinx/Makefile                |    4 +
>  drivers/firmware/xilinx/zynqmp/Kconfig          |   16 +
>  drivers/firmware/xilinx/zynqmp/Makefile         |    4 +
>  drivers/firmware/xilinx/zynqmp/firmware.c       | 1051 +++++++++++++++++++++++
>  include/linux/firmware/xilinx/zynqmp/firmware.h |  590 +++++++++++++
>  9 files changed, 1672 insertions(+)
>  create mode 100644 drivers/firmware/xilinx/Kconfig
>  create mode 100644 drivers/firmware/xilinx/Makefile
>  create mode 100644 drivers/firmware/xilinx/zynqmp/Kconfig
>  create mode 100644 drivers/firmware/xilinx/zynqmp/Makefile
>  create mode 100644 drivers/firmware/xilinx/zynqmp/firmware.c
>  create mode 100644 include/linux/firmware/xilinx/zynqmp/firmware.h
> 
> +
> +/**
> + * zynqmp_pm_force_powerdown - PM call to request for another PU or subsystem to
> + *				be powered down forcefully
> + * @target:	Node ID of the targeted PU or subsystem
> + * @ack:	Flag to specify whether acknowledge is requested
> + *
> + * Return:	Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_force_powerdown(const u32 target,
> +				     const enum zynqmp_pm_request_ack ack)
> +{
> +	return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, target, ack, 0, 0, NULL);
> +}
> +

[...]

> +/**
> + * zynqmp_pm_system_shutdown - PM call to request a system shutdown or restart
> + * @type:	Shutdown or restart? 0 for shutdown, 1 for restart
> + * @subtype:	Specifies which system should be restarted or shut down
> + *
> + * Return:	Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype)
> +{
> +	return zynqmp_pm_invoke_fn(PM_SYSTEM_SHUTDOWN, type, subtype,
> +				   0, 0, NULL);
> +}
> +

I can't understand why you need above 2 APIs: PM_FORCE_POWERDOWN and
PM_SYSTEM_SHUTDOWN. You should use PSCI_SYSTEM_OFF and PSCI_SYSTEM_RESET
and drop these two.


> +static const struct zynqmp_eemi_ops eemi_ops = {
> +	.get_api_version = zynqmp_pm_get_api_version,
> +	.get_chipid = zynqmp_pm_get_chipid,
> +	.reset_assert = zynqmp_pm_reset_assert,
> +	.reset_get_status = zynqmp_pm_reset_get_status,
> +	.fpga_load = zynqmp_pm_fpga_load,
> +	.fpga_get_status = zynqmp_pm_fpga_get_status,
> +	.sha_hash = zynqmp_pm_sha_hash,
> +	.rsa = zynqmp_pm_rsa,
> +	.request_suspend = zynqmp_pm_request_suspend,
> +	.force_powerdown = zynqmp_pm_force_powerdown,
> +	.request_wakeup = zynqmp_pm_request_wakeup,
> +	.set_wakeup_source = zynqmp_pm_set_wakeup_source,
> +	.system_shutdown = zynqmp_pm_system_shutdown,
> +	.request_node = zynqmp_pm_request_node,
> +	.release_node = zynqmp_pm_release_node,
> +	.set_requirement = zynqmp_pm_set_requirement,
> +	.set_max_latency = zynqmp_pm_set_max_latency,
> +	.set_configuration = zynqmp_pm_set_configuration,
> +	.get_node_status = zynqmp_pm_get_node_status,
> +	.get_operating_characteristic = zynqmp_pm_get_operating_characteristic,
> +	.init_finalize = zynqmp_pm_init_finalize,
> +	.set_suspend_mode = zynqmp_pm_set_suspend_mode,
> +	.ioctl = zynqmp_pm_ioctl,
> +	.query_data = zynqmp_pm_query_data,
> +	.pinctrl_request = zynqmp_pm_pinctrl_request,
> +	.pinctrl_release = zynqmp_pm_pinctrl_release,
> +	.pinctrl_get_function = zynqmp_pm_pinctrl_get_function,
> +	.pinctrl_set_function = zynqmp_pm_pinctrl_set_function,
> +	.pinctrl_get_config = zynqmp_pm_pinctrl_get_config,
> +	.pinctrl_set_config = zynqmp_pm_pinctrl_set_config,
> +	.clock_enable = zynqmp_pm_clock_enable,
> +	.clock_disable = zynqmp_pm_clock_disable,
> +	.clock_getstate = zynqmp_pm_clock_getstate,
> +	.clock_setdivider = zynqmp_pm_clock_setdivider,
> +	.clock_getdivider = zynqmp_pm_clock_getdivider,
> +	.clock_setrate = zynqmp_pm_clock_setrate,
> +	.clock_getrate = zynqmp_pm_clock_getrate,
> +	.clock_setparent = zynqmp_pm_clock_setparent,
> +	.clock_getparent = zynqmp_pm_clock_getparent,
> +};
> +
Instead of introducing all these in oneshot, add them as you have users
of it. IOW, show the users of these functions in the series. Also I
asked to split this into functional changes like clock, pinctrl, power, etc.

-- 
Regards,
Sudeep