linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: William Zhang <william.zhang@broadcom.com>,
	Linux ARM List <linux-arm-kernel@lists.infradead.org>
Cc: joel.peshkin@broadcom.com, dan.beygelman@broadcom.com,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Wim Van Sebroeck" <wim@linux-watchdog.org>,
	"Rafał Miłecki" <rafal@milecki.pl>,
	"open list:I2C SUBSYSTEM HOST DRIVERS"
	<linux-i2c@vger.kernel.org>,
	"open list" <linux-kernel@vger.kernel.org>,
	"open list:MEMORY TECHNOLOGY DEVICES (MTD)"
	<linux-mtd@lists.infradead.org>,
	"open list:NETWORKING DRIVERS" <netdev@vger.kernel.org>,
	"open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS"
	<linux-pci@vger.kernel.org>,
	"open list:GENERIC PHY FRAMEWORK" <linux-phy@lists.infradead.org>,
	"open list:PIN CONTROL SUBSYSTEM" <linux-gpio@vger.kernel.org>,
	"open list:BROADCOM BMIPS MIPS ARCHITECTURE"
	<linux-mips@vger.kernel.org>,
	"open list:SERIAL DRIVERS" <linux-serial@vger.kernel.org>,
	"open list:WATCHDOG DEVICE DRIVERS"
	<linux-watchdog@vger.kernel.org>
Subject: Re: [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
Date: Wed, 20 Jul 2022 20:33:53 -0700	[thread overview]
Message-ID: <dc9a6f40-ae8c-b025-7ac5-13d28150dd88@roeck-us.net> (raw)
In-Reply-To: <20220721000740.29624-1-william.zhang@broadcom.com>

On 7/20/22 17:07, William Zhang wrote:
> Replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> ---
> 
>   drivers/i2c/busses/Kconfig            | 4 ++--
>   drivers/mtd/parsers/Kconfig           | 6 +++---
>   drivers/net/ethernet/broadcom/Kconfig | 4 ++--
>   drivers/pci/controller/Kconfig        | 2 +-
>   drivers/phy/broadcom/Kconfig          | 4 ++--
>   drivers/pinctrl/bcm/Kconfig           | 4 ++--
>   drivers/reset/Kconfig                 | 2 +-
>   drivers/soc/bcm/bcm63xx/Kconfig       | 4 ++--
>   drivers/tty/serial/Kconfig            | 4 ++--
>   drivers/watchdog/Kconfig              | 2 +-

For watchdog:

Acked-by: Guenter Roeck <linux@roeck-us.net>

>   10 files changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 45a4e9f1b639..fd9a4dd01997 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -487,8 +487,8 @@ config I2C_BCM_KONA
>   
>   config I2C_BRCMSTB
>   	tristate "BRCM Settop/DSL I2C controller"
> -	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
> -		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
> +	depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
> +		   BMIPS_GENERIC || COMPILE_TEST
>   	default y
>   	help
>   	  If you say yes to this option, support will be included for the
> diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
> index b43df73927a0..d6db655a1d24 100644
> --- a/drivers/mtd/parsers/Kconfig
> +++ b/drivers/mtd/parsers/Kconfig
> @@ -69,8 +69,8 @@ config MTD_OF_PARTS
>   
>   config MTD_OF_PARTS_BCM4908
>   	bool "BCM4908 partitioning support"
> -	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
> -	default ARCH_BCM4908
> +	depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
> +	default ARCH_BCMBCA
>   	help
>   	  This provides partitions parser for BCM4908 family devices
>   	  that can have multiple "firmware" partitions. It takes care of
> @@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
>   
>   config MTD_OF_PARTS_LINKSYS_NS
>   	bool "Linksys Northstar partitioning support"
> -	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
> +	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
>   	default ARCH_BCM_5301X
>   	help
>   	  This provides partitions parser for Linksys devices based on Broadcom
> diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
> index 56e0fb07aec7..f4e1ca68d831 100644
> --- a/drivers/net/ethernet/broadcom/Kconfig
> +++ b/drivers/net/ethernet/broadcom/Kconfig
> @@ -53,8 +53,8 @@ config B44_PCI
>   
>   config BCM4908_ENET
>   	tristate "Broadcom BCM4908 internal mac support"
> -	depends on ARCH_BCM4908 || COMPILE_TEST
> -	default y if ARCH_BCM4908
> +	depends on ARCH_BCMBCA || COMPILE_TEST
> +	default y if ARCH_BCMBCA
>   	help
>   	  This driver supports Ethernet controller integrated into Broadcom
>   	  BCM4908 family SoCs.
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index d1c5fcf00a8a..bfd9bac37e24 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -274,7 +274,7 @@ config VMD
>   
>   config PCIE_BRCMSTB
>   	tristate "Broadcom Brcmstb PCIe host controller"
> -	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
> +	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
>   		   BMIPS_GENERIC || COMPILE_TEST
>   	depends on OF
>   	depends on PCI_MSI_IRQ_DOMAIN
> diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
> index 93a6a8ee4716..1d89a2fd9b79 100644
> --- a/drivers/phy/broadcom/Kconfig
> +++ b/drivers/phy/broadcom/Kconfig
> @@ -93,11 +93,11 @@ config PHY_BRCM_SATA
>   
>   config PHY_BRCM_USB
>   	tristate "Broadcom STB USB PHY driver"
> -	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
> +	depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
>   	depends on OF
>   	select GENERIC_PHY
>   	select SOC_BRCMSTB if ARCH_BRCMSTB
> -	default ARCH_BCM4908 || ARCH_BRCMSTB
> +	default ARCH_BCMBCA || ARCH_BRCMSTB
>   	help
>   	  Enable this to support the Broadcom STB USB PHY.
>   	  This driver is required by the USB XHCI, EHCI and OHCI
> diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
> index 8f4d89806fcb..35b51ce4298e 100644
> --- a/drivers/pinctrl/bcm/Kconfig
> +++ b/drivers/pinctrl/bcm/Kconfig
> @@ -31,13 +31,13 @@ config PINCTRL_BCM2835
>   
>   config PINCTRL_BCM4908
>   	tristate "Broadcom BCM4908 pinmux driver"
> -	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
> +	depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
>   	select PINMUX
>   	select PINCONF
>   	select GENERIC_PINCONF
>   	select GENERIC_PINCTRL_GROUPS
>   	select GENERIC_PINMUX_FUNCTIONS
> -	default ARCH_BCM4908
> +	default ARCH_BCMBCA
>   	help
>   	  Driver for BCM4908 family SoCs with integrated pin controller.
>   
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index f9a7cee01659..7ae71535fe2a 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -201,7 +201,7 @@ config RESET_SCMI
>   
>   config RESET_SIMPLE
>   	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
> -	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
> +	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
>   	help
>   	  This enables a simple reset controller driver for reset lines that
>   	  that can be asserted and deasserted by toggling bits in a contiguous,
> diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
> index 9e501c8ac5ce..355c34482076 100644
> --- a/drivers/soc/bcm/bcm63xx/Kconfig
> +++ b/drivers/soc/bcm/bcm63xx/Kconfig
> @@ -13,8 +13,8 @@ endif # SOC_BCM63XX
>   
>   config BCM_PMB
>   	bool "Broadcom PMB (Power Management Bus) driver"
> -	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
> -	default ARCH_BCM4908
> +	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
> +	default ARCH_BCMBCA
>   	select PM_GENERIC_DOMAINS if PM
>   	help
>   	  This enables support for the Broadcom's PMB (Power Management Bus) that
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index e3279544b03c..f32bb01c3feb 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
>   config SERIAL_BCM63XX
>   	tristate "Broadcom BCM63xx/BCM33xx UART support"
>   	select SERIAL_CORE
> -	depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
> -	default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
> +	depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
> +	default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
>   	help
>   	  This enables the driver for the onchip UART core found on
>   	  the following chipsets:
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 32fd37698932..1f85ec8a4b3b 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1798,7 +1798,7 @@ config BCM7038_WDT
>   	tristate "BCM63xx/BCM7038 Watchdog"
>   	select WATCHDOG_CORE
>   	depends on HAS_IOMEM
> -	depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
> +	depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
>   	help
>   	  Watchdog driver for the built-in hardware in Broadcom 7038 and
>   	  later SoCs used in set-top boxes.  BCM7038 was made public


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-07-21  3:35 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-21  0:07 [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA William Zhang
2022-07-21  3:33 ` Guenter Roeck [this message]
2022-07-21  7:30 ` Rafał Miłecki
2022-07-21 19:44   ` William Zhang
2022-07-21  7:44 ` Rafał Miłecki
2022-07-21 18:56 ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dc9a6f40-ae8c-b025-7ac5-13d28150dd88@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=bhelgaas@google.com \
    --cc=dan.beygelman@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=joel.peshkin@broadcom.com \
    --cc=kishon@ti.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=netdev@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=rafal@milecki.pl \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    --cc=william.zhang@broadcom.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).