From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-17.4 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id A69BEC4338F for ; Thu, 12 Aug 2021 11:28:35 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 5AF0E6023F for ; Thu, 12 Aug 2021 11:28:35 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 5AF0E6023F Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=glider.be Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=9SKL9eDHIFMW/sg2Es1K+wY2DydqUFXSoNTnui9vkVo=; b=o22pUHVCFe8Czn mm5DKz3gionXCZ+n++uy0lwxFxxlDHUonxd4dpLCv++/WsVlpUq4OoSrAwTi9w2vfF5HEKWot6tYe B/VZsBzQa3dt2B4AxIWG6H8IE1obLvFw9AQaQ2284ZRKk4KlXAob8X8N2NDHUE7Y6q52pC34X5CCI 09xnwSfnmUEaxxZL4Ah9e6UsZr4nefmeCsOqGfaWy/ftWAMEk6fAVt6DGxlkuA1vUjfIQo3rv57Ln /b+FD8MP/uSQK9kb0LrpffWAaviqss08wp5DMLyHu0mNIl9ed+iyzAt1/LtzOsA67+C1T0yU1lt7W ZnnV9FARZ8+l8pgE1g7Q==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mE8py-009lFF-7R; Thu, 12 Aug 2021 11:25:26 +0000 Received: from xavier.telenet-ops.be ([2a02:1800:120:4::f00:14]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mE8p4-009l29-Sw for linux-arm-kernel@lists.infradead.org; Thu, 12 Aug 2021 11:24:36 +0000 Received: from ramsan.of.borg ([IPv6:2a02:1810:ac12:ed20:438:1ff1:1071:f524]) by xavier.telenet-ops.be with bizsmtp id gbQR2500P1gJxCh01bQR3E; Thu, 12 Aug 2021 13:24:25 +0200 Received: from rox.of.borg ([192.168.97.57]) by ramsan.of.borg with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.93) (envelope-from ) id 1mE8oz-002Fio-4t; Thu, 12 Aug 2021 13:24:25 +0200 Received: from geert by rox.of.borg with local (Exim 4.93) (envelope-from ) id 1mE8ox-007439-J4; Thu, 12 Aug 2021 13:24:23 +0200 From: Geert Uytterhoeven To: Magnus Damm , Rob Herring Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven , Laurent Pinchart Subject: [PATCH v2 04/29] arm64: dts: renesas: Factor out Ebisu board support Date: Thu, 12 Aug 2021 13:23:54 +0200 Message-Id: X-Mailer: git-send-email 2.25.1 In-Reply-To: References: MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20210812_042431_267181_4DD7F604 X-CRM114-Status: GOOD ( 14.88 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Move the common parts for the Renesas Ebisu board to ebisu.dtsi, to avoid future duplication of board descriptions. Change a reference in a comment from "r8a77990" to "R-Car E3(e)", to prepare for the advent of "R-Car E3e". Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart --- v2: - Replace "E3" by "E3(e)", - Add Reviewed-by, - Rebased. --- .../{r8a77990-ebisu.dts => ebisu.dtsi} | 10 +- .../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 788 +----------------- 2 files changed, 5 insertions(+), 793 deletions(-) copy arch/arm64/boot/dts/renesas/{r8a77990-ebisu.dts => ebisu.dtsi} (98%) diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/ebisu.dtsi similarity index 98% copy from arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts copy to arch/arm64/boot/dts/renesas/ebisu.dtsi index 9c7146084ea1c779..54f88bb7e5920296 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -1,18 +1,16 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Ebisu board with R-Car E3 + * Device Tree Source for the Ebisu board * * Copyright (C) 2018 Renesas Electronics Corp. */ -/dts-v1/; -#include "r8a77990.dtsi" #include #include / { - model = "Renesas Ebisu board based on r8a77990"; - compatible = "renesas,ebisu", "renesas,r8a77990"; + model = "Renesas Ebisu board"; + compatible = "renesas,ebisu"; aliases { serial0 = &scif2; @@ -313,7 +311,7 @@ phy0: ethernet-phy@0 { * TX clock internal delay mode is required for reliable * 1Gbps communication using the KSZ9031RNX phy present on * the Ebisu board, however, TX clock internal delay mode - * isn't supported on r8a77990. Thus, limit speed to + * isn't supported on R-Car E3(e). Thus, limit speed to * 100Mbps for reliable communication. */ max-speed = <100>; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 9c7146084ea1c779..9da0fd08f8c46b35 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -7,795 +7,9 @@ /dts-v1/; #include "r8a77990.dtsi" -#include -#include +#include "ebisu.dtsi" / { model = "Renesas Ebisu board based on r8a77990"; compatible = "renesas,ebisu", "renesas,r8a77990"; - - aliases { - serial0 = &scif2; - ethernet0 = &avb; - mmc0 = &sdhi3; - mmc1 = &sdhi0; - mmc2 = &sdhi1; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - - audio_clkout: audio-clkout { - /* - * This is same as <&rcar_sound 0> - * but needed to avoid cs2000/rcar_sound probe dead-lock - */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 50000>; - - brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; - default-brightness-level = <10>; - - power-supply = <®_12p0v>; - }; - - cvbs-in { - compatible = "composite-video-connector"; - label = "CVBS IN"; - - port { - cvbs_con: endpoint { - remote-endpoint = <&adv7482_ain7>; - }; - }; - }; - - hdmi-in { - compatible = "hdmi-connector"; - label = "HDMI IN"; - type = "a"; - - port { - hdmi_in_con: endpoint { - remote-endpoint = <&adv7482_hdmi>; - }; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&keys_pins>; - pinctrl-names = "default"; - - key-1 { - gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW4-1"; - wakeup-source; - debounce-interval = <20>; - }; - key-2 { - gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW4-2"; - wakeup-source; - debounce-interval = <20>; - }; - key-3 { - gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW4-3"; - wakeup-source; - debounce-interval = <20>; - }; - key-4 { - gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW4-4"; - wakeup-source; - debounce-interval = <20>; - }; - }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <®_3p3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - - reg_1p8v: regulator0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_12p0v: regulator2 { - compatible = "regulator-fixed"; - regulator-name = "D12.0V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-boot-on; - regulator-always-on; - }; - - rsnd_ak4613: sound { - compatible = "simple-audio-card"; - - simple-audio-card,name = "rsnd-ak4613"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcpu>; - simple-audio-card,frame-master = <&sndcpu>; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4613>; - }; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - }; - - vbus0_usb2: regulator-vbus0-usb2 { - compatible = "regulator-fixed"; - - regulator-name = "USB20_VBUS_CN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vcc_sdhi1: regulator-vcc-sdhi1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI1 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; - }; - - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; - - x13_clk: x13 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; -}; - -&audio_clk_a { - clock-frequency = <22579200>; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - phy-handle = <&phy0>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio2>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; - /* - * TX clock internal delay mode is required for reliable - * 1Gbps communication using the KSZ9031RNX phy present on - * the Ebisu board, however, TX clock internal delay mode - * isn't supported on r8a77990. Thus, limit speed to - * 100Mbps for reliable communication. - */ - max-speed = <100>; - }; -}; - -&canfd { - pinctrl-0 = <&canfd0_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; -}; - -&csi40 { - status = "okay"; - - ports { - port@0 { - csi40_in: endpoint { - clock-lanes = <0>; - data-lanes = <1 2>; - remote-endpoint = <&adv7482_txa>; - }; - }; - }; -}; - -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&x13_clk>; - clock-names = "du.0", "du.1", "dclkin.0"; - - ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; - }; - }; - }; -}; - -&ehci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&extal_clk { - clock-frequency = <48000000>; -}; - -&hsusb { - dr_mode = "otg"; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - io_expander: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&gpio2>; - interrupts = <22 IRQ_TYPE_LEVEL_LOW>; - }; - - hdmi-encoder@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&thc63lvd1024_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - video-receiver@70 { - compatible = "adi,adv7482"; - reg = <0x70>; - - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&gpio0>; - interrupt-names = "intrq1", "intrq2"; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>, - <17 IRQ_TYPE_LEVEL_LOW>; - - port@7 { - reg = <7>; - - adv7482_ain7: endpoint { - remote-endpoint = <&cvbs_con>; - }; - }; - - port@8 { - reg = <8>; - - adv7482_hdmi: endpoint { - remote-endpoint = <&hdmi_in_con>; - }; - }; - - port@a { - reg = <10>; - - adv7482_txa: endpoint { - clock-lanes = <0>; - data-lanes = <1 2>; - remote-endpoint = <&csi40_in>; - }; - }; - }; -}; - -&i2c3 { - status = "okay"; - - ak4613: codec@10 { - compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; - reg = <0x10>; - clocks = <&rcar_sound 3>; - - asahi-kasei,in1-single-end; - asahi-kasei,in2-single-end; - asahi-kasei,out1-single-end; - asahi-kasei,out2-single-end; - asahi-kasei,out3-single-end; - asahi-kasei,out4-single-end; - asahi-kasei,out5-single-end; - asahi-kasei,out6-single-end; - }; - - cs2000: clk-multiplier@4f { - #clock-cells = <0>; - compatible = "cirrus,cs2000-cp"; - reg = <0x4f>; - clocks = <&audio_clkout>, <&x12_clk>; - clock-names = "clk_in", "ref_clk"; - - assigned-clocks = <&cs2000>; - assigned-clock-rates = <24576000>; /* 1/1 divide */ - }; -}; - -&i2c_dvfs { - status = "okay"; - - clock-frequency = <400000>; - - pmic: pmic@30 { - pinctrl-0 = <&irq0_pins>; - pinctrl-names = "default"; - - compatible = "rohm,bd9571mwv"; - reg = <0x30>; - interrupt-parent = <&intc_ex>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - rohm,ddr-backup-power = <0x1>; - rohm,rstbmode-level; - }; - - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; -}; - -&lvds0 { - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x13_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; - -&lvds1 { - /* - * Even though the LVDS1 output is not connected, the encoder must be - * enabled to supply a pixel clock to the DU for the DPAD output when - * LVDS0 is in use. - */ - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x13_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; -}; - -&ohci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&pcie_bus_clk { - clock-frequency = <100000000>; -}; - -&pciec0 { - status = "okay"; -}; - -&pfc { - avb_pins: avb { - groups = "avb_link", "avb_mii"; - function = "avb"; - }; - - canfd0_pins: canfd0 { - groups = "canfd0_data"; - function = "canfd0"; - }; - - du_pins: du { - groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - function = "du"; - }; - - irq0_pins: irq0 { - groups = "intc_ex_irq0"; - function = "intc_ex"; - }; - - keys_pins: keys { - pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13"; - bias-pull-up; - }; - - pwm3_pins: pwm3 { - groups = "pwm3_b"; - function = "pwm3"; - }; - - pwm5_pins: pwm5 { - groups = "pwm5_a"; - function = "pwm5"; - }; - - scif2_pins: scif2 { - groups = "scif2_data_a"; - function = "scif2"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sdhi0_pins_uhs: sd0_uhs { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <1800>; - }; - - sdhi1_pins: sd1 { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <3300>; - }; - - sdhi1_pins_uhs: sd1_uhs { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <1800>; - }; - - sdhi3_pins: sd3 { - groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; - function = "sdhi3"; - power-source = <1800>; - }; - - sound_clk_pins: sound_clk { - groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a", - "audio_clkout_a", "audio_clkout1_a"; - function = "audio_clk"; - }; - - sound_pins: sound { - groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; - function = "ssi"; - }; - - usb0_pins: usb { - groups = "usb0_b", "usb0_id"; - function = "usb0"; - }; - - usb30_pins: usb30 { - groups = "usb30"; - function = "usb30"; - }; -}; - -&pwm3 { - pinctrl-0 = <&pwm3_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm5 { - pinctrl-0 = <&pwm5_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - /* audio_clkout0/1/2/3 */ - #clock-cells = <1>; - clock-frequency = <12288000 11289600>; - - status = "okay"; - - /* update to */ - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, - <&cpg CPG_CORE R8A77990_CLK_ZA2>; - - rcar_sound,dai { - dai0 { - playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; - }; - }; - -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi1>; - vqmmc-supply = <&vccq_sdhi1>; - cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdhi3 { - /* used for on-board 8bit eMMC */ - pinctrl-0 = <&sdhi3_pins>; - pinctrl-1 = <&sdhi3_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - bus-width = <8>; - no-sd; - no-sdio; - non-removable; - full-pwr-cycle-in-suspend; - status = "okay"; -}; - -&ssi1 { - shared-pin; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&vbus0_usb2>; - status = "okay"; -}; - -&usb3_peri0 { - companion = <&xhci0>; - status = "okay"; -}; - -&vin4 { - status = "okay"; -}; - -&vin5 { - status = "okay"; -}; - -&xhci0 { - pinctrl-0 = <&usb30_pins>; - pinctrl-names = "default"; - - status = "okay"; }; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel