From: "Guido Günther" <agx@sigxcpu.org>
To: "Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Angus Ainslie (Purism)" <angus@akkea.ca>,
"Guido Günther" <agx@sigxcpu.org>,
"Martin Kepplinger" <martink@posteo.de>,
"Anson Huang" <Anson.Huang@nxp.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: imx8mq-librem5-devkit: Add proximity sensor
Date: Mon, 20 Jan 2020 17:12:55 +0100 [thread overview]
Message-ID: <e0434a87d8d46211a076c8a7c75c9f47b9e963c7.1579536647.git.agx@sigxcpu.org> (raw)
Support for the vcnl4040 landet a while ago so add it and the
corresponding pinmux. The irq is currently unused in the driver so don't
configure it yet.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
.../boot/dts/freescale/imx8mq-librem5-devkit.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index c8627f6614ae..b87c2e39b16c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -448,6 +448,12 @@
VDDIO-supply = <®_1v8_p>;
};
+ prox@60 {
+ compatible = "vishay,vcnl4040";
+ reg = <0x60>;
+ pinctrl-0 = <&pinctrl_prox>;
+ };
+
accel-gyro@6a {
compatible = "st,lsm9ds1-imu";
reg = <0x6a>;
@@ -550,6 +556,12 @@
>;
};
+ pinctrl_prox: proxgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x80 /* prox intr */
+ >;
+ };
+
pinctrl_pwr_en: pwrengrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-01-20 16:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-20 16:12 Guido Günther [this message]
2020-02-14 2:24 ` [PATCH] arm64: dts: imx8mq-librem5-devkit: Add proximity sensor Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e0434a87d8d46211a076c8a7c75c9f47b9e963c7.1579536647.git.agx@sigxcpu.org \
--to=agx@sigxcpu.org \
--cc=Anson.Huang@nxp.com \
--cc=angus@akkea.ca \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martink@posteo.de \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).