From: Matthias Brugger <matthias.bgg@gmail.com>
To: Stefan Wahren <wahrenst@gmx.net>, Eric Anholt <eric@anholt.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Matthias Brugger <mbrugger@suse.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-gpio@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
bcm-kernel-feedback-list@broadcom.com
Subject: Re: [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support
Date: Mon, 22 Jul 2019 13:26:07 +0200 [thread overview]
Message-ID: <e1634622-0cc8-9a61-dd2a-575ca7fa1de4@gmail.com> (raw)
In-Reply-To: <1563774880-8061-1-git-send-email-wahrenst@gmx.net>
On 22/07/2019 07:54, Stefan Wahren wrote:
> This series adds minimal support for the new Raspberry Pi 4, so we are able
> to login via debug UART.
>
> Patch 1-5: Prepare platform and DTS for the new SoC BMC2711
> Patch 6-10: Enable support for emmc2 on BCM2711
> Patch 11-12: Enable pinctrl for BCM2711
> Patch 13-17: Add Raspberry Pi 4 DTS support
> Patch 18: Update MAINTAINERS
It seems that you only send patch 1-12 and in two batches. Can you please resend
or send the rest of the patches.
Regards,
Matthias
>
> Unfortunately the Raspberry Pi Foundation didn't released a
> peripheral documentation for the new SoC yet. So we only have a preliminary
> datasheet [1] and reduced schematics [2].
>
> Changes since RFC:
> - change BCM2838 -> BCM2711 as discussed in RFC
> - update MAINTAINERS accordingly
> - drop "spi: bcm2835: enable shared interrupt support" from series
> - squash all pinctrl-bcm2835 changes into one patch
> - introduce SoC specific clock registration as suggested by Florian
> - fix watchdog probing for Raspberry Pi 4
> - convert brcm,bcm2835.txt to json-schema
> - move VC4 node to bcm2835-common.dtsi
> - fallback to legacy pull config for Raspberry Pi 4
> - revert unintended change of mailbox in bcm283x.dtsi
> - add reference for arm64
>
> [1] - https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/rpi_DATA_2711_1p0_preliminary.pdf
> [2] - https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_4b_4p0_reduced.pdf
>
> Phil Elwell (1):
> ARM: bcm2835: DMA can only address 1GB
>
> Stefan Wahren (17):
> ARM: bcm283x: Reduce register ranges for UART, SPI and I2C
> ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi
> ARM: dts: bcm283x: Define MMC interfaces at board level
> ARM: dts: bcm283x: Define memory at board level
> dt-bindings: bcm2835-cprman: Add bcm2711 support
> clk: bcm2835: Introduce SoC specific clock registration
> clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
> dt-bindings: sdhci-iproc: Add brcm,bcm2711-emmc2
> mmc: sdhci-iproc: Add support for emmc2 of the BCM2711
> dt-bindings: pinctrl: bcm2835: Add brcm,bcm2711 compatible
> pinctrl: bcm2835: Add support for BCM2711 pull-up functionality
> dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema
> dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema
> ARM: bcm2835: Add bcm2711 compatible string
> ARM: dts: Add minimal Raspberry Pi 4 support
> arm64: dts: broadcom: Add reference to RPi 4 B
> MAINTAINERS: Add BCM2711 to BCM2835 ARCH
>
> .../devicetree/bindings/arm/bcm/bcm2835.yaml | 51 ++
> .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 67 ---
> .../bindings/clock/brcm,bcm2835-cprman.txt | 4 +-
> .../devicetree/bindings/mmc/brcm,sdhci-iproc.txt | 4 +-
> .../bindings/pinctrl/brcm,bcm2835-gpio.txt | 1 +
> MAINTAINERS | 3 +-
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 120 ++++
> arch/arm/boot/dts/bcm2711.dtsi | 667 +++++++++++++++++++++
> arch/arm/boot/dts/bcm2835-common.dtsi | 177 ++++++
> arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 12 +
> arch/arm/boot/dts/bcm2835-rpi-a.dts | 12 +
> arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 12 +
> arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 12 +
> arch/arm/boot/dts/bcm2835-rpi-b.dts | 12 +
> arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts | 7 +
> arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi | 5 +
> arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 12 +
> arch/arm/boot/dts/bcm2835-rpi-zero.dts | 12 +
> arch/arm/boot/dts/bcm2835-rpi.dtsi | 18 -
> arch/arm/boot/dts/bcm2835.dtsi | 1 +
> arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 8 +
> arch/arm/boot/dts/bcm2836.dtsi | 1 +
> arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 1 +
> arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 1 +
> arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 +
> arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts | 7 +
> arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi | 1 +
> arch/arm/boot/dts/bcm2837.dtsi | 1 +
> arch/arm/boot/dts/bcm283x.dtsi | 160 +----
> arch/arm/mach-bcm/board_bcm2835.c | 2 +
> arch/arm64/boot/dts/broadcom/Makefile | 3 +-
> arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 2 +
> drivers/clk/bcm/clk-bcm2835.c | 117 +++-
> drivers/mmc/host/sdhci-iproc.c | 9 +
> drivers/pinctrl/bcm/pinctrl-bcm2835.c | 105 +++-
> include/dt-bindings/clock/bcm2835.h | 2 +
> 37 files changed, 1365 insertions(+), 266 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
> delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
> create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> create mode 100644 arch/arm/boot/dts/bcm2711.dtsi
> create mode 100644 arch/arm/boot/dts/bcm2835-common.dtsi
> create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts
>
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-22 11:26 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-22 5:54 [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-07-22 5:54 ` [PATCH 01/18] ARM: bcm283x: Reduce register ranges for UART, SPI and I2C Stefan Wahren
2019-07-24 20:01 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 02/18] ARM: bcm2835: DMA can only address 1GB Stefan Wahren
2019-07-22 5:54 ` [PATCH 03/18] ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi Stefan Wahren
2019-07-22 17:54 ` Eric Anholt
2019-07-22 5:54 ` [PATCH 04/18] ARM: dts: bcm283x: Define MMC interfaces at board level Stefan Wahren
2019-08-12 21:03 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 05/18] ARM: dts: bcm283x: Define memory " Stefan Wahren
2019-08-12 21:02 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 06/18] dt-bindings: bcm2835-cprman: Add bcm2711 support Stefan Wahren
2019-07-22 5:54 ` [PATCH 07/18] clk: bcm2835: Introduce SoC specific clock registration Stefan Wahren
2019-07-22 10:30 ` Matthias Brugger
2019-08-11 20:43 ` Stefan Wahren
2019-07-22 5:54 ` [PATCH 08/18] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support Stefan Wahren
2019-07-22 10:30 ` Matthias Brugger
2019-07-22 5:54 ` [PATCH 09/18] dt-bindings: sdhci-iproc: Add brcm,bcm2711-emmc2 Stefan Wahren
2019-07-22 10:31 ` Matthias Brugger
2019-07-24 14:08 ` Ulf Hansson
2019-07-22 11:26 ` Matthias Brugger [this message]
2019-07-22 13:18 ` [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Nicolas Saenz Julienne
2019-07-22 18:10 ` Stefan Wahren
2019-07-23 9:34 ` Christoph Hellwig
2019-07-23 13:32 ` Nicolas Saenz Julienne
2019-07-23 14:33 ` Christoph Hellwig
2019-07-23 16:26 ` Stefan Wahren
2019-07-23 17:33 ` Nicolas Saenz Julienne
2019-07-23 21:30 ` Stefan Wahren
2019-07-24 2:53 ` Chen-Yu Tsai
2019-07-24 8:37 ` Nicolas Saenz Julienne
[not found] ` <3daef629-8baf-3c5c-16a4-73d67604d1e5@gmx.net>
2019-07-29 5:44 ` brcmfmac: Probing regression in Linux 5.3-rc1 Stefan Wahren
2019-07-25 8:22 ` [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Nicolas Saenz Julienne
2019-07-25 22:09 ` Stefan Wahren
2019-07-22 18:01 ` Eric Anholt
2019-07-28 11:22 ` Stefan Wahren
2019-08-05 9:33 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e1634622-0cc8-9a61-dd2a-575ca7fa1de4@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=adrian.hunter@intel.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=eric@anholt.net \
--cc=f.fainelli@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mbrugger@suse.com \
--cc=mturquette@baylibre.com \
--cc=nsaenzjulienne@suse.de \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sbranden@broadcom.com \
--cc=ulf.hansson@linaro.org \
--cc=wahrenst@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).