From mboxrd@z Thu Jan 1 00:00:00 1970 From: tomi.valkeinen@ti.com (Tomi Valkeinen) Date: Fri, 2 Sep 2016 14:48:52 +0300 Subject: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1 In-Reply-To: References: <20160902090600.27262-1-nm@ti.com> <20160902090600.27262-3-nm@ti.com> <6617013b-4fcd-76cb-7ef0-9395adcddd8d@ti.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 02/09/16 13:01, Nishanth Menon wrote: > On 09/02/2016 04:58 AM, Tomi Valkeinen wrote: >> On 02/09/16 12:06, Nishanth Menon wrote: >> >>> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts >>> b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts >>> new file mode 100644 >>> index 000000000000..da61dbba7768 >>> --- /dev/null >>> +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts >>> @@ -0,0 +1,24 @@ >>> +/* >>> + * Copyright (C) 2014-2016 Texas Instruments Incorporated - >>> http://www.ti.com/ >>> + * >>> + * This program is free software; you can redistribute it and/or modify >>> + * it under the terms of the GNU General Public License version 2 as >>> + * published by the Free Software Foundation. >>> + */ >>> + >>> +#include "am57xx-beagle-x15-common.dtsi" >>> + >>> +/ { >>> + model = "TI AM5728 BeagleBoard-X15 rev B1"; >>> +}; >>> + >>> +&tpd12s015 { >>> + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ >>> + <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio6_30, LS OE */ >> >> Wrong gpio in the comment. > > Uggh.. thanks for catching that.. should have been gpio2_30 > > will repost a v2 if there are no further comments at the end of the day.. Booting and HDMI works fine: Tested-by: Tomi Valkeinen Tomi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: OpenPGP digital signature URL: