From mboxrd@z Thu Jan 1 00:00:00 1970 From: varada@codeaurora.org (Varadarajan Narayanan) Date: Thu, 18 May 2017 14:09:26 +0530 Subject: [PATCH v2 1/5] pinctrl: qcom: Add ipq8074 pinctrl driver In-Reply-To: <20170517193315.GF12920@tuxbook> References: <1493898841-20583-1-git-send-email-varada@codeaurora.org> <1493898841-20583-2-git-send-email-varada@codeaurora.org> <20170510224355.GE45273@Bjorns-MacBook-Pro-2.local> <1f4c9974-f6a4-bee7-4f37-ad8795e442a3@codeaurora.org> <20170514042307.GE69278@Bjorns-MacBook-Pro-2.local> <7afc7191-bcb1-a566-eac5-a4fe1293c773@codeaurora.org> <20170517193315.GF12920@tuxbook> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 5/18/2017 1:03 AM, Bjorn Andersson wrote: > On Mon 15 May 02:05 PDT 2017, Varadarajan Narayanan wrote: > >> On 5/14/2017 9:53 AM, Bjorn Andersson wrote: >>> On Thu 11 May 03:33 PDT 2017, Varadarajan Narayanan wrote: >>> >>>> On 5/11/2017 4:13 AM, Bjorn Andersson wrote: >>>>> On Thu 04 May 04:53 PDT 2017, Varadarajan Narayanan wrote: > [..] >>>>>> + msm_mux_qpic_pad4, >>>>> >>>>> What are qpic_pad and qpic_pad0 through qpic_pad8? Different functions, >>>>> alternative muxings...? >>>> >>>> This is for the NAND and LCD display. The pins listed are the 9 data pins. >>>> >>> >>> Then you can describe them all as "qpic_pad" (or simply "qpic"?). (It's >>> possible to reference a partial group in the DTS, if that's necessary) >> >> There are two sets of 9 pins, either of which can go to NAND or LCD. >> Will rename qpic_pad as qpic_a and qpic_pad[0-8] as qpic_b. >> Is that ok? >> > > So you have NAND and LCD hardware muxed to either "a" or "b" and then > you mux either "a" or "b" out onto actual pins? > > How is this first mux configured? > > I think the a/b scheme sounds reasonable, if above is how it works. Sorry, I was wrong. I had misread the documentation. There are 18 pins. 15 pins are common between LCD and NAND. The QPIC controller arbitrates between LCD and NAND. Of the remaining 4, 2 are for NAND and 2 are for LCD exclusively. We plan to group the qpic pins into 3 groups namely, qpic_common, qpic_nand and qpic_lcd. Is that ok? Thanks Varada > > Regards, > Bjorn > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project