From mboxrd@z Thu Jan 1 00:00:00 1970 From: khilman@baylibre.com (Kevin Hilman) Date: Fri, 26 May 2017 11:20:55 -0700 Subject: [PATCH 1/2] ARM: dts: meson: organize devices in their corresponding busses In-Reply-To: (Martin Blumenstingl's message of "Sat, 20 May 2017 10:45:02 +0200") References: <20170417213938.22626-1-martin.blumenstingl@googlemail.com> <20170417213938.22626-2-martin.blumenstingl@googlemail.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Martin Blumenstingl writes: > On Sat, May 20, 2017 at 12:49 AM, Kevin Hilman wrote: >> Martin Blumenstingl writes: >> >>> The Amlogic Meson SoCs have most of the internal peripherals organized >>> in busses. Use them to make the dts easier to read and to avoid >>> duplicated register (bus) offset definitions. >>> >>> The bus information is taken from the vendor kernel: >>> #define IO_CBUS_PHY_BASE 0xc1100000 ///2M >>> #define IO_AOBUS_PHY_BASE 0xc8100000 ///1M >>> >>> There are more internal busses (such as the abp bus which seems to >>> contain audio, HDMI and Mali registers), but since we don't have >>> drivers for them yet these are not added (yet). >>> >>> Signed-off-by: Martin Blumenstingl >> >> I tested this series on my meson8b-odroidc1 and it boots fine. >> >> Series looks fine to me, except... >> >> [...] >> >>> >>> ethmac: ethernet at c9410000 { >>> compatible = "amlogic,meson6-dwmac", "snps,dwmac"; >>> reg = <0xc9410000 0x10000 >>> - 0xc1108108 0x4>; >>> + 0xc1108108 0x4>; >> >> stray tab removal? > oh, excellent catch - thank you! > >> I fixed that up locally and applied to v4.13/dt64 branch. > nice, thank you! > > do the ARM maintainers still want separate pull-requests for 32-bit > and 64-bit .dts/defconfig/etc. changes? > you might want to move the three latest commits from v4.13/dt64 to > v4.13/dt32 in that case, but this should be trivial (since these > patches don't depend on anything else) yes, you're right. I'll move them. Kevin