Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Akash Asthana <akashast@codeaurora.org>
To: gregkh@linuxfoundation.org
Cc: swboyd@chromium.org, mgautam@codeaurora.org,
	linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org,
	Akash Asthana <akashast@codeaurora.org>
Subject: [PATCH v6 2/5] Revert "tty: serial: qcom_geni_serial: IRQ cleanup"
Date: Fri, 22 Nov 2019 14:18:08 +0000
Message-ID: <0101016e937a3077-0e4686f8-fad9-4592-b428-17be97b39fed-000000@us-west-2.amazonses.com> (raw)
In-Reply-To: <1574432266-20732-1-git-send-email-akashast@codeaurora.org>

This reverts commit 3e4aaea7a0391d47f6ffff1f10594c658a67c881.

To apply v6 patches cleanly on tty-next branch, revert v2 patches.

Signed-off-by: Akash Asthana <akashast@codeaurora.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 5180cd8..14c6306 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -9,7 +9,6 @@
 #include <linux/console.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
-#include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -831,7 +830,7 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
 	if (uart_console(uport))
 		console_stop(uport->cons);
 
-	disable_irq(uport->irq);
+	free_irq(uport->irq, uport);
 	spin_lock_irqsave(&uport->lock, flags);
 	qcom_geni_serial_stop_tx(uport);
 	qcom_geni_serial_stop_rx(uport);
@@ -891,14 +890,21 @@ static int qcom_geni_serial_startup(struct uart_port *uport)
 	int ret;
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 
+	scnprintf(port->name, sizeof(port->name),
+		  "qcom_serial_%s%d",
+		(uart_console(uport) ? "console" : "uart"), uport->line);
+
 	if (!port->setup) {
 		ret = qcom_geni_serial_port_setup(uport);
 		if (ret)
 			return ret;
 	}
-	enable_irq(uport->irq);
 
-	return 0;
+	ret = request_irq(uport->irq, qcom_geni_serial_isr, IRQF_TRIGGER_HIGH,
+							port->name, uport);
+	if (ret)
+		dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret);
+	return ret;
 }
 
 static unsigned long get_clk_cfg(unsigned long clk_freq)
@@ -1291,21 +1297,11 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS;
 	port->tx_fifo_width = DEF_FIFO_WIDTH_BITS;
 
-	scnprintf(port->name, sizeof(port->name), "qcom_geni_serial_%s%d",
-		(uart_console(uport) ? "console" : "uart"), uport->line);
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 	uport->irq = irq;
 
-	irq_set_status_flags(uport->irq, IRQ_NOAUTOEN);
-	ret = devm_request_irq(uport->dev, uport->irq, qcom_geni_serial_isr,
-			IRQF_TRIGGER_HIGH, port->name, uport);
-	if (ret) {
-		dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret);
-		return ret;
-	}
-
 	uport->private_data = drv;
 	platform_set_drvdata(pdev, port);
 	port->handle_rx = console ? handle_rx_console : handle_rx_uart;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project


  parent reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1574432266-20732-1-git-send-email-akashast@codeaurora.org>
2019-11-22 14:18 ` [PATCH v6 1/5] Revert "tty: serial: qcom_geni_serial: Wakeup over UART RX" Akash Asthana
2019-11-22 14:18 ` Akash Asthana [this message]
2019-11-22 14:18 ` [PATCH v6 3/5] tty: serial: qcom_geni_serial: IRQ cleanup Akash Asthana
2019-11-22 18:46   ` Matthias Kaehlcke
2019-11-25 12:04     ` Akash Asthana
2019-11-22 14:18 ` [PATCH v6 4/5] tty: serial: qcom_geni_serial: Wakeup over UART RX Akash Asthana
2019-11-22 18:22   ` Stephen Boyd
2019-11-25 12:06     ` Akash Asthana
2019-11-22 19:11   ` Matthias Kaehlcke
2019-11-25 12:06     ` Akash Asthana
2019-11-22 14:18 ` [PATCH v6 5/5] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP Akash Asthana
2019-11-22 18:07   ` Stephen Boyd
     [not found] ` <0101016e937a3f78-11fa1469-8c73-4f56-a3de-3221dcf6f0e3-000000@us-west-2.amazonses.com>
2019-11-22 18:15   ` [PATCH v6 3/5] tty: serial: qcom_geni_serial: IRQ cleanup Stephen Boyd

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0101016e937a3077-0e4686f8-fad9-4592-b428-17be97b39fed-000000@us-west-2.amazonses.com \
    --to=akashast@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mgautam@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git