linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sharat Masetty <smasetty@codeaurora.org>
To: freedreno@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: dri-devel@freedesktop.org, linux-arm-msm@vger.kernel.org,
	Sharat Masetty <smasetty@codeaurora.org>
Subject: [PATCH] arm: dts: sc7180: Add A618 gpu dt blob
Date: Tue, 3 Dec 2019 15:17:49 +0000	[thread overview]
Message-ID: <0101016ecc56c5c5-ab66c0ce-da45-4d8e-9cac-8f6be69001d3-000000@us-west-2.amazonses.com> (raw)

This patch adds the required dt nodes and properties
to enabled A618 GPU.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 116 +++++++++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index c3db2e5..31223d0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -18,6 +18,8 @@
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
+#include <dt-bindings/power/qcom-rpmpd.h>

 / {
 	interrupt-parent = <&intc>;
@@ -733,6 +735,120 @@
 			#power-domain-cells = <1>;
 		};

+		gpu: gpu@5000000 {
+			compatible = "qcom,adreno-618.0", "qcom,adreno";
+			#stream-id-cells = <16>;
+			reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x1000>,
+				<0 0x5061000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			interconnects = <&gem_noc 35 &mc_virt 512>;
+
+			qcom,gmu = <&gmu>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-565000000 {
+					opp-hz = /bits/ 64 <565000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-430000000 {
+					opp-hz = /bits/ 64 <430000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+                                opp-355000000 {
+					opp-hz = /bits/ 64 <355000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+                                opp-267000000 {
+					opp-hz = /bits/ 64 <267000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-180000000 {
+					opp-hz = /bits/ 64 <180000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@5040000 {
+			compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2";
+			reg = <0 0x5040000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				<&gcc GCC_GPU_CFG_AHB_CLK>,
+				<&gcc GCC_DDRSS_GPU_AXI_CLK>;
+
+			clock-names = "bus", "iface", "mem_iface_clk";
+			power-domains = <&gpucc CX_GDSC>;
+		};
+
+		gmu: gmu@506a000 {
+			compatible="qcom,adreno-gmu-618", "qcom,adreno-gmu";
+
+			reg = 	<0 0x506a000 0 0x31000>,
+				<0 0xb290000 0 0x10000>,
+				<0 0xb490000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+			       <&gpucc GPU_CC_CXO_CLK>,
+			       <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+			       <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc CX_GDSC>;
+
+			iommus = <&adreno_smmu 5>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
--
1.9.1


             reply	other threads:[~2019-12-03 15:17 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-03 15:17 Sharat Masetty [this message]
2019-12-29  6:33 ` [PATCH] arm: dts: sc7180: Add A618 gpu dt blob Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0101016ecc56c5c5-ab66c0ce-da45-4d8e-9cac-8f6be69001d3-000000@us-west-2.amazonses.com \
    --to=smasetty@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).