linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	Matti Vaittinen <mazziesaccount@gmail.com>
Cc: Mark Brown <broonie@kernel.org>,
	Kees Cook <keescook@chromium.org>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Zhang Rui <rui.zhang@intel.com>,
	Guenter Roeck <linux@roeck-us.net>,
	"agross@kernel.org" <agross@kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	linux-power <linux-power@fi.rohmeurope.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-renesas-soc@vger.kernel.org" 
	<linux-renesas-soc@vger.kernel.org>,
	"linux-arm-msm@vger.kernel.org" <linux-arm-msm@vger.kernel.org>,
	"bjorn.andersson@linaro.org" <bjorn.andersson@linaro.org>,
	"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>
Subject: [PATCH v9 01/10] dt_bindings: Add protection limit properties
Date: Mon, 10 May 2021 14:27:04 +0300	[thread overview]
Message-ID: <05fe8d0089f1378f984cf86cb25caa5eb630e87c.1620645507.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1620645507.git.matti.vaittinen@fi.rohmeurope.com>

[-- Attachment #1: Type: text/plain, Size: 6540 bytes --]

Support specifying protection/error/warning limits for regulator
over current, over temperature and over/under voltage.

Most of the PMICs support only "protection" feature but few
setups do also support error/warning level indications.

On many ICs most of the protection limits can't actually be set.
But for example the ampere limit for over-current protection on ROHM
BD9576 can be configured - or feature can be completely disabled.

Provide limit setting for all protections/errors for the sake of
the completeness and do that using own properties for all so that
not all users would need to set all levels when only one or few are
supported.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>

---
No changes since RFC-v2
---
 .../bindings/regulator/regulator.yaml         | 82 +++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 6d0bc9cd4040..a6ae9ecae5cc 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -117,6 +117,88 @@ properties:
     description: Enable over current protection.
     type: boolean
 
+  regulator-oc-protection-microamp:
+    description: Set over current protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted.
+
+  regulator-oc-error-microamp:
+    description: Set over current error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested.
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted.
+
+  regulator-oc-warn-microamp:
+    description: Set over current warning limit. This is a limit where hardware
+      is assumed still to be functional but approaching limit where it gets
+      damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted.
+
+  regulator-ov-protection-microvolt:
+    description: Set over voltage protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted. Limit is given as microvolt offset from
+      voltage set to regulator.
+
+  regulator-ov-error-microvolt:
+    description: Set over voltage error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted. Limit
+      is given as microvolt offset from voltage set to regulator.
+
+  regulator-ov-warn-microvolt:
+    description: Set over voltage warning limit. This is a limit where hardware
+      is assumed still to be functional but approaching limit where it gets
+      damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted. Limit is given as microvolt
+      offset from voltage set to regulator.
+
+  regulator-uv-protection-microvolt:
+    description: Set over under voltage protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted. Limit is given as microvolt offset from
+      voltage set to regulator.
+
+  regulator-uv-error-microvolt:
+    description: Set under voltage error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted. Limit
+      is given as microvolt offset from voltage set to regulator.
+
+  regulator-uv-warn-microvolt:
+    description: Set over under voltage warning limit. This is a limit where
+      hardware is assumed still to be functional but approaching limit where
+      it gets damaged. Recovery actions should be initiated. Zero can be passed
+      to disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted. Limit is given as microvolt
+      offset from voltage set to regulator.
+
+  regulator-temp-protection-kelvin:
+    description: Set over temperature protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted.
+
+  regulator-temp-error-kelvin:
+    description: Set over temperature error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted.
+
+  regulator-temp-warn-kelvin:
+    description: Set over temperature warning limit. This is a limit where
+      hardware is assumed still to be functional but approaching limit where it
+      gets damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted.
+
   regulator-active-discharge:
     description: |
       tristate, enable/disable active discharge of regulators. The values are:
-- 
2.25.4


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

  reply	other threads:[~2021-05-10 11:43 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-10 11:26 [PATCH v9 00/10] Extend regulator notification support Matti Vaittinen
2021-05-10 11:27 ` Matti Vaittinen [this message]
2021-05-10 11:28 ` [PATCH v9 02/10] reboot: Add hardware protection power-off Matti Vaittinen
2021-05-12  8:20   ` Petr Mladek
2021-05-12 12:00     ` Vaittinen, Matti
2021-05-13  8:34       ` Petr Mladek
2021-05-17  4:57         ` Matti Vaittinen
2021-05-10 11:29 ` [PATCH v9 03/10] thermal: Use generic HW-protection shutdown API Matti Vaittinen
2021-05-10 11:29 ` [PATCH v9 04/10] regulator: add warning flags Matti Vaittinen
2021-05-10 11:29 ` [PATCH v9 05/10] regulator: IRQ based event/error notification helpers Matti Vaittinen
2021-05-11  4:54   ` Matti Vaittinen
2021-05-10 11:30 ` [PATCH v9 06/10] regulator: add property parsing and callbacks to set protection limits Matti Vaittinen
2021-05-10 11:30 ` [PATCH v9 07/10] dt-bindings: regulator: bd9576 add FET ON-resistance for OCW Matti Vaittinen
2021-05-10 11:30 ` [PATCH v9 08/10] regulator: bd9576: Support error reporting Matti Vaittinen
2021-05-10 11:31 ` [PATCH v9 09/10] regulator: bd9576: Fix the driver name in id table Matti Vaittinen
2021-05-10 11:31 ` [PATCH v9 10/10] MAINTAINERS: Add reviewer for regulator irq_helpers Matti Vaittinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=05fe8d0089f1378f984cf86cb25caa5eb630e87c.1620645507.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=agross@kernel.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=keescook@chromium.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-power@fi.rohmeurope.com \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mazziesaccount@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --subject='Re: [PATCH v9 01/10] dt_bindings: Add protection limit properties' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).