From mboxrd@z Thu Jan 1 00:00:00 1970 From: bjorn@kryo.se Subject: [PATCH v2 06/11] mfd: qcom-smd-rpm: Driver for the Qualcomm RPM over SMD Date: Fri, 26 Jun 2015 14:50:14 -0700 Message-ID: <1435355419-23602-7-git-send-email-bjorn.andersson@sonymobile.com> References: <1435355419-23602-1-git-send-email-bjorn.andersson@sonymobile.com> Return-path: Received: from mail-pa0-f45.google.com ([209.85.220.45]:36714 "EHLO mail-pa0-f45.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753258AbbFZVud (ORCPT ); Fri, 26 Jun 2015 17:50:33 -0400 Received: by paceq1 with SMTP id eq1so74418888pac.3 for ; Fri, 26 Jun 2015 14:50:33 -0700 (PDT) In-Reply-To: <1435355419-23602-1-git-send-email-bjorn.andersson@sonymobile.com> Sender: linux-arm-msm-owner@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org To: Andy Gross , Samuel Ortiz , Lee Jones Cc: Mark Brown , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org From: Bjorn Andersson Driver for the Resource Power Manager (RPM) found in Qualcomm 8974 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson --- drivers/mfd/Kconfig | 14 +++ drivers/mfd/Makefile | 1 + drivers/mfd/qcom-smd-rpm.c | 236 +++++++++++++++++++++++++++++++++++++++ include/linux/mfd/qcom-smd-rpm.h | 35 ++++++ 4 files changed, 286 insertions(+) create mode 100644 drivers/mfd/qcom-smd-rpm.c create mode 100644 include/linux/mfd/qcom-smd-rpm.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 6538159..666c812 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -656,6 +656,20 @@ config MFD_QCOM_RPM Say M here if you want to include support for the Qualcomm RPM as a module. This will build a module called "qcom_rpm". +config MFD_QCOM_SMD_RPM + tristate "Qualcomm Resource Power Manager (RPM) over SMD" + depends on QCOM_SMD && OF + help + If you say yes to this option, support will be included for the + Resource Power Manager system found in the Qualcomm 8974 based + devices. + + This is required to access many regulators, clocks and bus + frequencies controlled by the RPM on these devices. + + Say M here if you want to include support for the Qualcomm RPM as a + module. This will build a module called "qcom-smd-rpm". + config MFD_SPMI_PMIC tristate "Qualcomm SPMI PMICs" depends on ARCH_QCOM || COMPILE_TEST diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ea40e07..289bd24 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -156,6 +156,7 @@ obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o +obj-$(CONFIG_MFD_QCOM_SMD_RPM) += qcom-smd-rpm.o obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o obj-$(CONFIG_MFD_TPS65090) += tps65090.o diff --git a/drivers/mfd/qcom-smd-rpm.c b/drivers/mfd/qcom-smd-rpm.c new file mode 100644 index 0000000..d6faf85 --- /dev/null +++ b/drivers/mfd/qcom-smd-rpm.c @@ -0,0 +1,236 @@ +/* + * Copyright (c) 2015, Sony Mobile Communications AB. + * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +#define RPM_REQUEST_TIMEOUT (5 * HZ) + +/** + * struct qcom_smd_rpm - state of the rpm device driver + * @rpm_channel: reference to the smd channel + * @ack: completion for acks + * @lock: mutual exclusion around the send/complete pair + * @ack_status: result of the rpm request + */ +struct qcom_smd_rpm { + struct qcom_smd_channel *rpm_channel; + + struct completion ack; + struct mutex lock; + int ack_status; +}; + +/** + * struct qcom_rpm_header - header for all rpm requests and responses + * @service_type: identifier of the service + * @length: length of the payload + */ +struct qcom_rpm_header { + u32 service_type; + u32 length; +}; + +/** + * struct qcom_rpm_request - request message to the rpm + * @msg_id: identifier of the outgoing message + * @flags: active/sleep state flags + * @type: resource type + * @id: resource id + * @data_len: length of the payload following this header + */ +struct qcom_rpm_request { + u32 msg_id; + u32 flags; + u32 type; + u32 id; + u32 data_len; +}; + +/** + * struct qcom_rpm_message - response message from the rpm + * @msg_type: indicator of the type of message + * @length: the size of this message, including the message header + * @msg_id: message id + * @message: textual message from the rpm + * + * Multiple of these messages can be stacked in an rpm message. + */ +struct qcom_rpm_message { + u32 msg_type; + u32 length; + union { + u32 msg_id; + u8 message[0]; + }; +}; + +#define RPM_SERVICE_TYPE_REQUEST 0x00716572 /* "req\0" */ + +#define RPM_MSG_TYPE_ERR 0x00727265 /* "err\0" */ +#define RPM_MSG_TYPE_MSG_ID 0x2367736d /* "msg#" */ + +/** + * qcom_rpm_smd_write - write @buf to @type:@id + * @rpm: rpm handle + * @type: resource type + * @id: resource identifier + * @buf: the data to be written + * @count: number of bytes in @buf + */ +int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm, + int state, + u32 type, u32 id, + void *buf, + size_t count) +{ + static unsigned msg_id = 1; + int left; + int ret; + + struct { + struct qcom_rpm_header hdr; + struct qcom_rpm_request req; + u8 payload[count]; + } pkt; + + /* SMD packets to the RPM may not exceed 256 bytes */ + if (WARN_ON(sizeof(pkt) >= 256)) + return -EINVAL; + + mutex_lock(&rpm->lock); + + pkt.hdr.service_type = RPM_SERVICE_TYPE_REQUEST; + pkt.hdr.length = sizeof(struct qcom_rpm_request) + count; + + pkt.req.msg_id = msg_id++; + pkt.req.flags = BIT(state); + pkt.req.type = type; + pkt.req.id = id; + pkt.req.data_len = count; + memcpy(pkt.payload, buf, count); + + ret = qcom_smd_send(rpm->rpm_channel, &pkt, sizeof(pkt)); + if (ret) + goto out; + + left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT); + if (!left) + ret = -ETIMEDOUT; + else + ret = rpm->ack_status; + +out: + mutex_unlock(&rpm->lock); + return ret; +} +EXPORT_SYMBOL(qcom_rpm_smd_write); + +#define RPM_ERR_INVALID_RESOURCE "resource does not exist" + +static int qcom_smd_rpm_callback(struct qcom_smd_device *qsdev, + const void *data, + size_t count) +{ + const struct qcom_rpm_header *hdr = data; + const struct qcom_rpm_message *msg; + const size_t inv_res_len = sizeof(RPM_ERR_INVALID_RESOURCE) - 1; + struct qcom_smd_rpm *rpm = dev_get_drvdata(&qsdev->dev); + const u8 *buf = data + sizeof(struct qcom_rpm_header); + const u8 *end = buf + hdr->length; + int status = 0; + + if (hdr->service_type != RPM_SERVICE_TYPE_REQUEST || + hdr->length < sizeof(struct qcom_rpm_message)) { + dev_err(&qsdev->dev, "invalid request\n"); + return 0; + } + + while (buf < end) { + msg = (struct qcom_rpm_message *)buf; + switch (msg->msg_type) { + case RPM_MSG_TYPE_MSG_ID: + break; + case RPM_MSG_TYPE_ERR: + if (msg->length == inv_res_len && + !memcmp(msg->message, + RPM_ERR_INVALID_RESOURCE, + inv_res_len)) + status = -ENXIO; + else + status = -EIO; + break; + } + + buf = PTR_ALIGN(buf + 2 * sizeof(u32) + msg->length, 4); + } + + rpm->ack_status = status; + complete(&rpm->ack); + return 0; +} + +static int qcom_smd_rpm_probe(struct qcom_smd_device *sdev) +{ + struct qcom_smd_rpm *rpm; + + rpm = devm_kzalloc(&sdev->dev, sizeof(*rpm), GFP_KERNEL); + if (!rpm) + return -ENOMEM; + + mutex_init(&rpm->lock); + init_completion(&rpm->ack); + + rpm->rpm_channel = sdev->channel; + + dev_set_drvdata(&sdev->dev, rpm); + + return of_platform_populate(sdev->dev.of_node, NULL, NULL, &sdev->dev); +} + +static void qcom_smd_rpm_remove(struct qcom_smd_device *sdev) +{ + of_platform_depopulate(&sdev->dev); +} + +static const struct of_device_id qcom_smd_rpm_of_match[] = { + { .compatible = "qcom,rpm-msm8974" }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match); + +static struct qcom_smd_driver qcom_smd_rpm_driver = { + .probe = qcom_smd_rpm_probe, + .remove = qcom_smd_rpm_remove, + .callback = qcom_smd_rpm_callback, + .driver = { + .name = "qcom_smd_rpm", + .owner = THIS_MODULE, + .of_match_table = qcom_smd_rpm_of_match, + }, +}; + +module_qcom_smd_driver(qcom_smd_rpm_driver); + +MODULE_AUTHOR("Bjorn Andersson "); +MODULE_DESCRIPTION("Qualcomm SMD backed RPM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/qcom-smd-rpm.h b/include/linux/mfd/qcom-smd-rpm.h new file mode 100644 index 0000000..2a53dca --- /dev/null +++ b/include/linux/mfd/qcom-smd-rpm.h @@ -0,0 +1,35 @@ +#ifndef __QCOM_SMD_RPM_H__ +#define __QCOM_SMD_RPM_H__ + +struct qcom_smd_rpm; + +#define QCOM_SMD_RPM_ACTIVE_STATE 0 +#define QCOM_SMD_RPM_SLEEP_STATE 1 + +/* + * Constants used for addressing resources in the RPM. + */ +#define QCOM_SMD_RPM_BOOST 0x61747362 +#define QCOM_SMD_RPM_BUS_CLK 0x316b6c63 +#define QCOM_SMD_RPM_BUS_MASTER 0x73616d62 +#define QCOM_SMD_RPM_BUS_SLAVE 0x766c7362 +#define QCOM_SMD_RPM_CLK_BUF_A 0x616B6C63 +#define QCOM_SMD_RPM_LDOA 0x616f646c +#define QCOM_SMD_RPM_LDOB 0x626F646C +#define QCOM_SMD_RPM_MEM_CLK 0x326b6c63 +#define QCOM_SMD_RPM_MISC_CLK 0x306b6c63 +#define QCOM_SMD_RPM_NCPA 0x6170636E +#define QCOM_SMD_RPM_NCPB 0x6270636E +#define QCOM_SMD_RPM_OCMEM_PWR 0x706d636f +#define QCOM_SMD_RPM_QPIC_CLK 0x63697071 +#define QCOM_SMD_RPM_SMPA 0x61706d73 +#define QCOM_SMD_RPM_SMPB 0x62706d73 +#define QCOM_SMD_RPM_SPDM 0x63707362 +#define QCOM_SMD_RPM_VSA 0x00617376 + +int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm, + int state, + u32 resource_type, u32 resource_id, + void *buf, size_t count); + +#endif -- 1.9.3 (Apple Git-50)