From: Sagar Dharia <sdharia@codeaurora.org>
To: gregkh@linuxfoundation.org, bp@suse.de, poeschel@lemonage.de,
sdharia@codeaurora.org, treding@nvidia.com, broonie@kernel.org,
gong.chen@linux.intel.com, andreas.noever@gmail.com,
alan@linux.intel.com, mathieu.poirier@linaro.org,
daniel@ffwll.ch, oded.gabbay@amd.com, jkosina@suse.cz,
sharon.dvir1@mail.huji.ac.il, joe@perches.com,
davem@davemloft.net, james.hogan@imgtec.com,
michael.opdenacker@free-electrons.com,
daniel.thompson@linaro.org, robh+dt@kernel.org,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: kheitke@audience.com, mlocke@codeaurora.org,
agross@codeaurora.org, linux-arm-msm@vger.kernel.org
Subject: [PATCH V3 2/6] of/slimbus: OF helper for SLIMbus
Date: Mon, 3 Aug 2015 00:59:46 -0600 [thread overview]
Message-ID: <1438585190-11894-3-git-send-email-sdharia@codeaurora.org> (raw)
In-Reply-To: <1438585190-11894-1-git-send-email-sdharia@codeaurora.org>
OF helper routine scans the SLIMbus DeviceTree, allocates resources,
and creates slim_devices according to the hierarchy.
Signed-off-by: Sagar Dharia <sdharia@codeaurora.org>
---
Documentation/devicetree/bindings/slimbus/bus.txt | 46 ++++++++++++++
drivers/slimbus/slim-core.c | 75 +++++++++++++++++++++++
2 files changed, 121 insertions(+)
create mode 100644 Documentation/devicetree/bindings/slimbus/bus.txt
diff --git a/Documentation/devicetree/bindings/slimbus/bus.txt b/Documentation/devicetree/bindings/slimbus/bus.txt
new file mode 100644
index 0000000..a79ed7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/bus.txt
@@ -0,0 +1,46 @@
+SLIM(Serial Low Power Interchip Media Bus) bus
+
+SLIMbus is a 2-wire bus, and is used to communicate with peripheral
+components like audio-codec.
+
+Controller is a normal device using binding for whatever bus it is
+on (e.g. platform bus).
+Required property for SLIMbus controller node:
+- compatible - name of SLIMbus controller following generic names
+ recommended practice.
+- #address-cells - should be 6 (number of cells required to define
+ enumeration address of the device on SLIMbus)
+- #size-cells - should be 0
+
+No other properties are required in the SLIMbus controller bus node.
+
+Child nodes:
+Every SLIMbus controller node can contain zero or more child nodes
+representing slave devices on the bus. Every SLIMbus slave device is
+uniquely determined by the 6 byte enumeration address.
+
+Required property for SLIMbus child node:
+- reg - 6 byte enumeration address of the slave
+
+Optional:
+- compatible - Slave devices can use compatible field to have a name.
+ If this field is missing, name of the device will be
+ determined using slave's enumeration address.
+ (e.g. in the example below, slave's name will be:
+ 0x217:0x60:0x1:0x0)
+
+SLIMbus example for Qualcomm's slimbus manager compoent:
+
+ slim@28080000 {
+ compatible = "qcom,slim-msm";
+ reg = <0x28080000 0x2000>,
+ reg-names = "slimbus_physical";
+ interrupts = <0 33 0>;
+ interrupt-names = "slimbus_irq";
+ clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+ clock-names = "iface_clk", "core_clk";
+
+ slim_codec_slave {
+ reg = <00 01 60 00 17 02>;
+ };
+ };
diff --git a/drivers/slimbus/slim-core.c b/drivers/slimbus/slim-core.c
index ee80c1b..d3fa28b 100644
--- a/drivers/slimbus/slim-core.c
+++ b/drivers/slimbus/slim-core.c
@@ -18,6 +18,7 @@
#include <linux/idr.h>
#include <linux/pm_runtime.h>
#include <linux/slimbus.h>
+#include <linux/of.h>
static DEFINE_MUTEX(slim_lock);
static DEFINE_IDR(ctrl_idr);
@@ -289,6 +290,79 @@ static LIST_HEAD(board_list);
static LIST_HEAD(slim_ctrl_list);
static DEFINE_MUTEX(board_lock);
+#if IS_ENABLED(CONFIG_OF)
+/* OF helpers for SLIMbus */
+static void of_register_slim_devices(struct slim_controller *ctrl)
+{
+ struct device_node *node;
+ struct slim_boardinfo *temp, *binfo = NULL;
+ int n = 0;
+
+ if (!ctrl->dev.of_node)
+ return;
+
+ for_each_child_of_node(ctrl->dev.of_node, node) {
+ int ret;
+ u32 ea[6];
+ struct slim_device *slim;
+ char *name;
+
+ ret = of_property_read_u32_array(node, "reg", ea, 6);
+ if (ret) {
+ dev_err(&ctrl->dev, "of_slim: E-addr err:%d\n", ret);
+ continue;
+ }
+ name = kcalloc(SLIMBUS_NAME_SIZE, sizeof(char), GFP_KERNEL);
+ if (!name)
+ goto of_slim_err;
+
+ slim = kzalloc(sizeof(struct slim_device), GFP_KERNEL);
+ if (!slim) {
+ kfree(name);
+ goto of_slim_err;
+ }
+ slim->e_addr.manf_id = (u16)((ea[5] << 8) | ea[4]);
+ slim->e_addr.prod_code = (u16)((ea[3] << 8) | ea[2]);
+ slim->e_addr.dev_index = (u8)ea[1];
+ slim->e_addr.instance = (u8)ea[0];
+
+ ret = of_modalias_node(node, name, SLIMBUS_NAME_SIZE);
+ if (ret < 0) {
+ /* use device address for name, if not specified */
+ snprintf(name, SLIMBUS_NAME_SIZE, "0x%x:0x%x:0x%x:0x%x",
+ slim->e_addr.manf_id, slim->e_addr.prod_code,
+ slim->e_addr.dev_index, slim->e_addr.instance);
+ }
+
+ temp = krealloc(binfo, (n + 1) * sizeof(struct slim_boardinfo),
+ GFP_KERNEL);
+ if (!temp) {
+ kfree(name);
+ kfree(slim);
+ goto of_slim_err;
+ }
+ binfo = temp;
+ slim->dev.of_node = of_node_get(node);
+ slim->name = name;
+ binfo[n].bus_num = ctrl->nr;
+ binfo[n].slim_slave = slim;
+ n++;
+ }
+ slim_register_board_info(binfo, n);
+ return;
+
+of_slim_err:
+ n--;
+ while (n >= 0) {
+ kfree(binfo[n].slim_slave->name);
+ kfree(binfo[n].slim_slave);
+ }
+ kfree(binfo);
+}
+#else
+static void of_register_slim_devices(struct slim_controller *ctrl) { }
+#endif
+
/* If controller is not present, only add to boards list */
static void slim_match_ctrl_to_boardinfo(struct slim_controller *ctrl,
struct slim_boardinfo *bi)
@@ -338,6 +412,7 @@ static void slim_ctrl_add_boarddevs(struct slim_controller *ctrl)
{
struct sbi_boardinfo *bi;
+ of_register_slim_devices(ctrl);
mutex_lock(&board_lock);
list_add_tail(&ctrl->list, &slim_ctrl_list);
list_for_each_entry(bi, &board_list, list)
--
1.8.2.1
next prev parent reply other threads:[~2015-08-03 6:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-03 6:59 [PATCH V3 0/6] Introduce framework for SLIMbus device drivers Sagar Dharia
2015-08-03 6:59 ` [PATCH V3 1/6] SLIMbus: Device management on SLIMbus Sagar Dharia
2015-08-14 18:17 ` Mark Brown
2015-08-03 6:59 ` Sagar Dharia [this message]
2015-08-03 16:13 ` [PATCH V3 2/6] of/slimbus: OF helper for SLIMbus Rob Herring
2015-08-04 17:27 ` Mark Brown
2015-08-06 19:10 ` Sagar Dharia
2015-08-03 6:59 ` [PATCH V3 3/6] slimbus: Add messaging APIs to slimbus framework Sagar Dharia
2015-08-14 18:25 ` Mark Brown
2015-08-14 18:33 ` Mark Brown
2015-08-03 6:59 ` [PATCH V3 4/6] slim: qcom: Add Qualcomm Slimbus controller driver Sagar Dharia
2015-08-14 18:31 ` Mark Brown
[not found] ` <20150814183106.GE10748-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-08-17 23:44 ` Sagar Dharia
2015-08-03 6:59 ` [PATCH V3 5/6] slimbus: Add support for 'clock-pause' feature Sagar Dharia
2015-08-14 18:39 ` Mark Brown
2015-08-17 23:43 ` Sagar Dharia
2015-08-03 6:59 ` [PATCH V3 6/6] slim: qcom: Add runtime-pm support using clock-pause feature Sagar Dharia
2015-08-14 18:43 ` Mark Brown
2015-08-14 18:46 ` [PATCH V3 0/6] Introduce framework for SLIMbus device drivers Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438585190-11894-3-git-send-email-sdharia@codeaurora.org \
--to=sdharia@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=alan@linux.intel.com \
--cc=andreas.noever@gmail.com \
--cc=bp@suse.de \
--cc=broonie@kernel.org \
--cc=daniel.thompson@linaro.org \
--cc=daniel@ffwll.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gong.chen@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=james.hogan@imgtec.com \
--cc=jkosina@suse.cz \
--cc=joe@perches.com \
--cc=kheitke@audience.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathieu.poirier@linaro.org \
--cc=michael.opdenacker@free-electrons.com \
--cc=mlocke@codeaurora.org \
--cc=oded.gabbay@amd.com \
--cc=pawel.moll@arm.com \
--cc=poeschel@lemonage.de \
--cc=robh+dt@kernel.org \
--cc=sharon.dvir1@mail.huji.ac.il \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).