linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Georgi Djakov <georgi.djakov@linaro.org>
To: linux@arm.linux.org.uk
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, iivanov.xz@gmail.com,
	georgi.djakov@linaro.org
Subject: [PATCH v1 1/2] amba: Defer device peripheral ID read
Date: Mon, 11 Apr 2016 17:58:35 +0300	[thread overview]
Message-ID: <1460386716-23262-1-git-send-email-georgi.djakov@linaro.org> (raw)

From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>

To be able to read peripheral ID during device create time
bus code have turn on device interface clock, but this
clock could be unavailable at this time. Fix this by defer
device ID read until driver match time.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 drivers/amba/bus.c |  138 ++++++++++++++++++++++++++--------------------------
 1 file changed, 69 insertions(+), 69 deletions(-)

diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index f0099360039e..a32a43dbaccc 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -24,11 +24,79 @@
 
 #define to_amba_driver(d)	container_of(d, struct amba_driver, drv)
 
+static int amba_get_enable_pclk(struct amba_device *pcdev)
+{
+	int ret;
+
+	pcdev->pclk = clk_get(&pcdev->dev, "apb_pclk");
+	if (IS_ERR(pcdev->pclk))
+		return PTR_ERR(pcdev->pclk);
+
+	ret = clk_prepare_enable(pcdev->pclk);
+	if (ret)
+		clk_put(pcdev->pclk);
+
+	return ret;
+}
+
+static void amba_put_disable_pclk(struct amba_device *pcdev)
+{
+	clk_disable_unprepare(pcdev->pclk);
+	clk_put(pcdev->pclk);
+}
+
+static int amba_read_periphid(struct amba_device *adev)
+{
+	resource_size_t size;
+	void __iomem *tmp;
+	int r, i;
+
+	if (adev->periphid)
+		return 0;
+
+	/*
+	 * Dynamically calculate the size of the resource
+	 * and use this for iomap
+	 */
+	size = resource_size(&adev->res);
+	tmp = ioremap(adev->res.start, size);
+	if (!tmp)
+		return -ENODEV;
+
+	r = amba_get_enable_pclk(adev);
+	if (r == 0) {
+		u32 pid, cid;
+
+		/*
+		 * Read pid and cid based on size of resource
+		 * they are located at end of region
+		 */
+		for (pid = 0, i = 0; i < 4; i++)
+			pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) <<
+				(i * 8);
+		for (cid = 0, i = 0; i < 4; i++)
+			cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) <<
+				(i * 8);
+
+		amba_put_disable_pclk(adev);
+
+		if (cid == AMBA_CID || cid == CORESIGHT_CID)
+			adev->periphid = pid;
+	}
+
+	iounmap(tmp);
+
+	return adev->periphid ? 0 : -ENODEV;
+}
+
 static const struct amba_id *
 amba_lookup(const struct amba_id *table, struct amba_device *dev)
 {
 	int ret = 0;
 
+	if (amba_read_periphid(dev))
+		return NULL;
+
 	while (table->mask) {
 		ret = (dev->periphid & table->mask) == table->id;
 		if (ret)
@@ -204,27 +272,6 @@ static int __init amba_init(void)
 
 postcore_initcall(amba_init);
 
-static int amba_get_enable_pclk(struct amba_device *pcdev)
-{
-	int ret;
-
-	pcdev->pclk = clk_get(&pcdev->dev, "apb_pclk");
-	if (IS_ERR(pcdev->pclk))
-		return PTR_ERR(pcdev->pclk);
-
-	ret = clk_prepare_enable(pcdev->pclk);
-	if (ret)
-		clk_put(pcdev->pclk);
-
-	return ret;
-}
-
-static void amba_put_disable_pclk(struct amba_device *pcdev)
-{
-	clk_disable_unprepare(pcdev->pclk);
-	clk_put(pcdev->pclk);
-}
-
 /*
  * These are the device model conversion veneers; they convert the
  * device model structures to our more specific structures.
@@ -347,9 +394,7 @@ static void amba_device_release(struct device *dev)
  */
 int amba_device_add(struct amba_device *dev, struct resource *parent)
 {
-	u32 size;
-	void __iomem *tmp;
-	int i, ret;
+	int ret;
 
 	WARN_ON(dev->irq[0] == (unsigned int)-1);
 	WARN_ON(dev->irq[1] == (unsigned int)-1);
@@ -358,51 +403,6 @@ int amba_device_add(struct amba_device *dev, struct resource *parent)
 	if (ret)
 		goto err_out;
 
-	/* Hard-coded primecell ID instead of plug-n-play */
-	if (dev->periphid != 0)
-		goto skip_probe;
-
-	/*
-	 * Dynamically calculate the size of the resource
-	 * and use this for iomap
-	 */
-	size = resource_size(&dev->res);
-	tmp = ioremap(dev->res.start, size);
-	if (!tmp) {
-		ret = -ENOMEM;
-		goto err_release;
-	}
-
-	ret = amba_get_enable_pclk(dev);
-	if (ret == 0) {
-		u32 pid, cid;
-
-		/*
-		 * Read pid and cid based on size of resource
-		 * they are located at end of region
-		 */
-		for (pid = 0, i = 0; i < 4; i++)
-			pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) <<
-				(i * 8);
-		for (cid = 0, i = 0; i < 4; i++)
-			cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) <<
-				(i * 8);
-
-		amba_put_disable_pclk(dev);
-
-		if (cid == AMBA_CID || cid == CORESIGHT_CID)
-			dev->periphid = pid;
-
-		if (!dev->periphid)
-			ret = -ENODEV;
-	}
-
-	iounmap(tmp);
-
-	if (ret)
-		goto err_release;
-
- skip_probe:
 	ret = device_add(&dev->dev);
 	if (ret)
 		goto err_release;

             reply	other threads:[~2016-04-11 14:58 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-11 14:58 Georgi Djakov [this message]
2016-04-11 14:58 ` [PATCH v1 2/2] amba: Propagate match errors to the driver core Georgi Djakov
2016-04-11 15:01 ` [PATCH v1 1/2] amba: Defer device peripheral ID read Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1460386716-23262-1-git-send-email-georgi.djakov@linaro.org \
    --to=georgi.djakov@linaro.org \
    --cc=iivanov.xz@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).