Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Ohad Ben-Cohen <ohad@wizery.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Sarangdhar Joshi <spjoshi@codeaurora.org>,
	linux-arm-msm@vger.kernel.org
Subject: [PATCH 02/11] rpmsg: smd: Expose edge registration functions
Date: Wed, 19 Oct 2016 19:40:03 -0700
Message-ID: <1476931212-1806-3-git-send-email-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <1476931212-1806-1-git-send-email-bjorn.andersson@linaro.org>

The edge registration functions is to be used from a remoteproc driver
to register and unregister an edge as the remote processor comes and
goes.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/rpmsg/qcom_smd.c       |  1 +
 include/linux/rpmsg/qcom_smd.h | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 include/linux/rpmsg/qcom_smd.h

diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
index 952338a6296a..aded7352f089 100644
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -25,6 +25,7 @@
 #include <linux/soc/qcom/smem.h>
 #include <linux/wait.h>
 #include <linux/rpmsg.h>
+#include <linux/rpmsg/qcom_smd.h>
 
 #include "rpmsg_internal.h"
 
diff --git a/include/linux/rpmsg/qcom_smd.h b/include/linux/rpmsg/qcom_smd.h
new file mode 100644
index 000000000000..7c12637a500e
--- /dev/null
+++ b/include/linux/rpmsg/qcom_smd.h
@@ -0,0 +1,33 @@
+
+#ifndef _LINUX_RPMSG_QCOM_SMD_H
+#define _LINUX_RPMSG_QCOM_SMD_H
+
+#include <linux/device.h>
+
+struct qcom_smd_edge;
+
+#if IS_ENABLED(CONFIG_RPMSG_QCOM_SMD)
+
+struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent,
+					     struct device_node *node);
+int qcom_smd_unregister_edge(struct qcom_smd_edge *edge);
+
+#else
+
+static inline struct qcom_smd_edge *
+qcom_smd_register_edge(struct device *parent,
+		       struct device_node *node)
+{
+	return ERR_PTR(-ENXIO);
+}
+
+static inline int qcom_smd_unregister_edge(struct qcom_smd_edge *edge)
+{
+	/* This shouldn't be possible */
+	WARN_ON(1);
+	return -ENXIO;
+}
+
+#endif
+
+#endif
-- 
2.5.0

  parent reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-20  2:40 [PATCH 00/11] rproc subdevice support Bjorn Andersson
2016-10-20  2:40 ` [PATCH 01/11] remoteproc: Introduce subdevices Bjorn Andersson
2016-10-20  2:40 ` Bjorn Andersson [this message]
2016-10-20  2:40 ` [PATCH 03/11] remoteproc: wcnss: Bond SMD edge to remoteproc Bjorn Andersson
2016-10-20  2:40 ` [PATCH 04/11] dt-binding: remoteproc: wcnss: Allow describing smd edge Bjorn Andersson
     [not found]   ` <1476931212-1806-5-git-send-email-bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-11-10  0:45     ` Rob Herring
2016-10-20  2:40 ` [PATCH 11/11] remoteproc: Merge table_ptr and cached_table pointers Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1476931212-1806-3-git-send-email-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=spjoshi@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git