From: Vivek Gautam <vivek.gautam@codeaurora.org>
To: kishon@ti.com, jejb@linux.vnet.ibm.com, vinholikatti@gmail.com,
martin.petersen@oracle.com
Cc: sboyd@codeaurora.org, subhashj@codeaurora.org,
ygardi@codeaurora.org, linux-scsi@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
Vivek Gautam <vivek.gautam@codeaurora.org>
Subject: [PATCH v3 09/12] ufs-qcom: phy/hcd: Refactoring phy clock handling
Date: Sun, 30 Oct 2016 01:52:11 +0530 [thread overview]
Message-ID: <1477772534-14170-10-git-send-email-vivek.gautam@codeaurora.org> (raw)
In-Reply-To: <1477772534-14170-1-git-send-email-vivek.gautam@codeaurora.org>
Add phy clock enable code to phy_power_on/off callbacks, and
remove explicit calls to enable these phy clocks from the
ufs-qcom hcd driver.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
Changes since v2:
- Added phy_power_on() and phy_power_off() calls to
power-cycle the PHY during aggressive clk gating.
Changes since v1:
- staticized ufs_qcom_phy_enable(/disable)_ref_clk(),
- staticized ufs_qcom_phy_enable(/disable)_iface_clk()
- removed function declaration and export symbol for these APIs.
drivers/phy/phy-qcom-ufs.c | 36 ++++++++++++++++++------------------
drivers/scsi/ufs/ufs-qcom.c | 18 +++---------------
include/linux/phy/phy-qcom-ufs.h | 18 ------------------
3 files changed, 21 insertions(+), 51 deletions(-)
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
index 1ec64d5..9dff4c2 100644
--- a/drivers/phy/phy-qcom-ufs.c
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -366,10 +366,9 @@ int ufs_qcom_phy_enable_vreg(struct device *dev,
return ret;
}
-int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy)
+static int ufs_qcom_phy_enable_ref_clk(struct ufs_qcom_phy *phy)
{
int ret = 0;
- struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
if (phy->is_ref_clk_enabled)
goto out;
@@ -416,7 +415,6 @@ int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy)
out:
return ret;
}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_ref_clk);
static
int ufs_qcom_phy_disable_vreg(struct device *dev,
@@ -441,10 +439,8 @@ int ufs_qcom_phy_disable_vreg(struct device *dev,
return ret;
}
-void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
+static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy)
{
- struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
-
if (phy->is_ref_clk_enabled) {
clk_disable_unprepare(phy->ref_clk);
/*
@@ -457,7 +453,6 @@ void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
phy->is_ref_clk_enabled = false;
}
}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_ref_clk);
#define UFS_REF_CLK_EN (1 << 5)
@@ -510,9 +505,8 @@ void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk);
/* Turn ON M-PHY RMMI interface clocks */
-int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
+static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy)
{
- struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
int ret = 0;
if (phy->is_iface_clk_enabled)
@@ -536,20 +530,16 @@ int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
out:
return ret;
}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_iface_clk);
/* Turn OFF M-PHY RMMI interface clocks */
-void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
+void ufs_qcom_phy_disable_iface_clk(struct ufs_qcom_phy *phy)
{
- struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
-
if (phy->is_iface_clk_enabled) {
clk_disable_unprepare(phy->tx_iface_clk);
clk_disable_unprepare(phy->rx_iface_clk);
phy->is_iface_clk_enabled = false;
}
}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_iface_clk);
int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
{
@@ -667,13 +657,20 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
goto out_disable_phy;
}
- err = ufs_qcom_phy_enable_ref_clk(generic_phy);
+ err = ufs_qcom_phy_enable_iface_clk(phy_common);
if (err) {
- dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
+ dev_err(dev, "%s enable phy iface clock failed, err=%d\n",
__func__, err);
goto out_disable_pll;
}
+ err = ufs_qcom_phy_enable_ref_clk(phy_common);
+ if (err) {
+ dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
+ __func__, err);
+ goto out_disable_iface_clk;
+ }
+
/* enable device PHY ref_clk pad rail */
if (phy_common->vddp_ref_clk.reg) {
err = ufs_qcom_phy_enable_vreg(dev,
@@ -689,7 +686,9 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
goto out;
out_disable_ref_clk:
- ufs_qcom_phy_disable_ref_clk(generic_phy);
+ ufs_qcom_phy_disable_ref_clk(phy_common);
+out_disable_iface_clk:
+ ufs_qcom_phy_disable_iface_clk(phy_common);
out_disable_pll:
ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_pll);
out_disable_phy:
@@ -708,7 +707,8 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy)
if (phy_common->vddp_ref_clk.reg)
ufs_qcom_phy_disable_vreg(phy_common->dev,
&phy_common->vddp_ref_clk);
- ufs_qcom_phy_disable_ref_clk(generic_phy);
+ ufs_qcom_phy_disable_ref_clk(phy_common);
+ ufs_qcom_phy_disable_iface_clk(phy_common);
ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll);
ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy);
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 3aedf73..9b6a081 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -1112,17 +1112,7 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
return 0;
if (on) {
- err = ufs_qcom_phy_enable_iface_clk(host->generic_phy);
- if (err)
- goto out;
-
- err = ufs_qcom_phy_enable_ref_clk(host->generic_phy);
- if (err) {
- dev_err(hba->dev, "%s enable phy ref clock failed, err=%d\n",
- __func__, err);
- ufs_qcom_phy_disable_iface_clk(host->generic_phy);
- goto out;
- }
+ phy_power_on(host->generic_phy);
/* enable the device ref clock for HS mode*/
if (ufshcd_is_hs_mode(&hba->pwr_info))
ufs_qcom_dev_ref_clk_ctrl(host, true);
@@ -1131,9 +1121,8 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
ufs_qcom_update_bus_bw_vote(host);
} else {
-
- /* M-PHY RMMI interface clocks can be turned off */
- ufs_qcom_phy_disable_iface_clk(host->generic_phy);
+ /* powering off PHY during aggressive clk gating */
+ phy_power_off(host->generic_phy);
if (!ufs_qcom_is_link_active(hba))
/* disable device ref_clk */
ufs_qcom_dev_ref_clk_ctrl(host, false);
@@ -1146,7 +1135,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
dev_err(hba->dev, "%s: set bus vote failed %d\n",
__func__, err);
-out:
return err;
}
diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h
index 9d18e9f..35c070e 100644
--- a/include/linux/phy/phy-qcom-ufs.h
+++ b/include/linux/phy/phy-qcom-ufs.h
@@ -18,22 +18,6 @@
#include "phy.h"
/**
- * ufs_qcom_phy_enable_ref_clk() - Enable the phy
- * ref clock.
- * @phy: reference to a generic phy
- *
- * returns 0 for success, and non-zero for error.
- */
-int ufs_qcom_phy_enable_ref_clk(struct phy *phy);
-
-/**
- * ufs_qcom_phy_disable_ref_clk() - Disable the phy
- * ref clock.
- * @phy: reference to a generic phy.
- */
-void ufs_qcom_phy_disable_ref_clk(struct phy *phy);
-
-/**
* ufs_qcom_phy_enable_dev_ref_clk() - Enable the device
* ref clock.
* @phy: reference to a generic phy.
@@ -47,8 +31,6 @@
*/
void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
-int ufs_qcom_phy_enable_iface_clk(struct phy *phy);
-void ufs_qcom_phy_disable_iface_clk(struct phy *phy);
int ufs_qcom_phy_start_serdes(struct phy *phy);
int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-10-29 20:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-29 20:22 [PATCH v3 00/12] ufs-qcom: phy/hcd: Clean up qcom-ufs phy and ufs-qcom hcd Vivek Gautam
2016-10-29 20:22 ` [PATCH v3 01/12] phy: qcom-ufs: Remove unnecessary BUG_ON Vivek Gautam
2016-10-29 20:22 ` [PATCH v3 02/12] phy: qcom-ufs: Use devm sibling of kstrdup for regulator names Vivek Gautam
2016-10-29 20:22 ` [PATCH v3 03/12] phy: qcom-ufs: Cleanup clock and regulator initialization Vivek Gautam
2016-10-29 20:22 ` [PATCH v3 04/12] phy: qcom-ufs-14nm: Add new compatible for msm8996 based phy Vivek Gautam
2016-10-31 21:11 ` Subhash Jadavani
2016-11-03 17:07 ` Vivek Gautam
2016-11-04 6:09 ` Subhash Jadavani
2016-10-29 20:22 ` [PATCH v3 05/12] phy: qcom-ufs: Skip obtaining rx/tx_iface_clk " Vivek Gautam
2016-11-01 18:42 ` Subhash Jadavani
2016-11-04 6:11 ` Subhash Jadavani
2016-10-29 20:22 ` [PATCH v3 06/12] phy: qcom-ufs-qmp-xx: Discard remove callback for drivers Vivek Gautam
2016-10-29 20:22 ` [PATCH v3 07/12] phy: qcom-ufs: Remove unnecessary function declarations Vivek Gautam
2016-10-29 20:22 ` [PATCH v3 08/12] phy: qcom-ufs-qmp-xx: Move clock and regulator init out of phy init Vivek Gautam
2016-10-29 20:22 ` Vivek Gautam [this message]
2016-11-01 18:47 ` [PATCH v3 09/12] ufs-qcom: phy/hcd: Refactoring phy clock handling Subhash Jadavani
2016-11-02 7:34 ` Vivek Gautam
2016-11-03 17:30 ` [PATCH v4 " Vivek Gautam
2016-11-04 6:05 ` Subhash Jadavani
2016-11-04 16:29 ` Martin K. Petersen
2016-10-29 20:22 ` [PATCH v3 10/12] phy: qcom-ufs: Remove common layer phy exit callback Vivek Gautam
2016-10-29 20:22 ` [PATCH v3 11/12] scsi/ufs: qcom: Add phy_exit call in hcd exit path Vivek Gautam
2016-10-29 20:22 ` [PATCH v3 12/12] scsi/ufs: qcom: Don't free resource-managed kmalloc element Vivek Gautam
2016-10-31 21:14 ` Subhash Jadavani
2016-11-01 13:58 ` [PATCH v3 00/12] ufs-qcom: phy/hcd: Clean up qcom-ufs phy and ufs-qcom hcd Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477772534-14170-10-git-send-email-vivek.gautam@codeaurora.org \
--to=vivek.gautam@codeaurora.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=sboyd@codeaurora.org \
--cc=subhashj@codeaurora.org \
--cc=vinholikatti@gmail.com \
--cc=ygardi@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).