Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Ilia Lin <ilialin@codeaurora.org>
To: mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
	mark.rutland@arm.com, viresh.kumar@linaro.org, nm@ti.com,
	lgirdwood@gmail.com, broonie@kernel.org, andy.gross@linaro.org,
	david.brown@linaro.org, catalin.marinas@arm.com,
	will.deacon@arm.com, rjw@rjwysocki.net,
	linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	rnayak@codeaurora.org, ilialin@codeaurora.org,
	amit.kucheria@linaro.org, nicolas.dechesne@linaro.org,
	celster@codeaurora.org, tfinkel@codeaurora.org
Subject: [PATCH v6 07/14] clk: qcom: Add ACD path to CPU clock driver for msm8996
Date: Mon, 14 May 2018 16:11:53 +0300
Message-ID: <1526303520-5843-8-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1526303520-5843-1-git-send-email-ilialin@codeaurora.org>

The PMUX for each duplex allows for selection of ACD clock source.
The DVM (Dynamic Variation Monitor) will flag an error
when a voltage droop event is detected. This flagged error
enables ACD to provide a div-by-2 clock, sourced from the primary PLL.
The duplex will be provided the divided clock
until a pre-programmed delay has expired.

This change configures ACD during the probe and switches
the PMUXes to the ACD clock source.

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
 drivers/clk/qcom/clk-cpu-8996.c | 75 +++++++++++++++++++++++++++++++++++------
 1 file changed, 65 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
index 3ea0446..396285c 100644
--- a/drivers/clk/qcom/clk-cpu-8996.c
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -62,9 +62,11 @@
  */
 
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <soc/qcom/kryo-l2-accessors.h>
 
 #include "clk-alpha-pll.h"
 #include "clk-regmap.h"
@@ -78,6 +80,11 @@ enum _pmux_input {
 };
 
 #define DIV_2_THRESHOLD		600000000
+#define PWRCL_REG_OFFSET 0x0
+#define PERFCL_REG_OFFSET 0x80000
+#define MUX_OFFSET	0x40
+#define ALT_PLL_OFFSET	0x100
+#define SSSCTL_OFFSET 0x160
 
 static const u8 prim_pll_regs[PLL_OFF_MAX_REGS] = {
        [PLL_OFF_L_VAL] = 0x04,
@@ -116,7 +123,7 @@ enum _pmux_input {
 };
 
 static struct clk_alpha_pll perfcl_pll = {
-	.offset = 0x80000,
+	.offset = PERFCL_REG_OFFSET,
 	.regs = prim_pll_regs,
 	.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
 	.clkr.hw.init = &(struct clk_init_data){
@@ -128,7 +135,7 @@ enum _pmux_input {
 };
 
 static struct clk_alpha_pll pwrcl_pll = {
-	.offset = 0x0,
+	.offset = PWRCL_REG_OFFSET,
 	.regs = prim_pll_regs,
 	.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
 	.clkr.hw.init = &(struct clk_init_data){
@@ -158,7 +165,7 @@ enum _pmux_input {
 };
 
 static struct clk_alpha_pll perfcl_alt_pll = {
-	.offset = 0x80100,
+	.offset = PERFCL_REG_OFFSET + ALT_PLL_OFFSET,
 	.regs = alt_pll_regs,
 	.vco_table = alt_pll_vco_modes,
 	.num_vco = ARRAY_SIZE(alt_pll_vco_modes),
@@ -172,7 +179,7 @@ enum _pmux_input {
 };
 
 static struct clk_alpha_pll pwrcl_alt_pll = {
-	.offset = 0x100,
+	.offset = PWRCL_REG_OFFSET + ALT_PLL_OFFSET,
 	.regs = alt_pll_regs,
 	.vco_table = alt_pll_vco_modes,
 	.num_vco = ARRAY_SIZE(alt_pll_vco_modes),
@@ -185,6 +192,9 @@ enum _pmux_input {
 	},
 };
 
+void __iomem *base;
+static void qcom_cpu_clk_msm8996_acd_init(void __iomem *base);
+
 /* Mux'es */
 
 struct clk_cpu_8996_mux {
@@ -262,6 +272,7 @@ int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
 	switch (event) {
 	case PRE_RATE_CHANGE:
 		ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, ALT_INDEX);
+		qcom_cpu_clk_msm8996_acd_init(base);
 		break;
 	case POST_RATE_CHANGE:
 		if (cnd->new_rate < DIV_2_THRESHOLD)
@@ -269,7 +280,7 @@ int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
 							  DIV_2_INDEX);
 		else
 			ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw,
-							  PLL_INDEX);
+							  ACD_INDEX);
 		break;
 	default:
 		ret = 0;
@@ -285,7 +296,7 @@ int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
 };
 
 static struct clk_cpu_8996_mux pwrcl_smux = {
-	.reg = 0x40,
+	.reg = PWRCL_REG_OFFSET + MUX_OFFSET,
 	.shift = 2,
 	.width = 2,
 	.clkr.hw.init = &(struct clk_init_data) {
@@ -301,7 +312,7 @@ int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
 };
 
 static struct clk_cpu_8996_mux perfcl_smux = {
-	.reg = 0x80040,
+	.reg = PERFCL_REG_OFFSET + MUX_OFFSET,
 	.shift = 2,
 	.width = 2,
 	.clkr.hw.init = &(struct clk_init_data) {
@@ -317,7 +328,7 @@ int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
 };
 
 static struct clk_cpu_8996_mux pwrcl_pmux = {
-	.reg = 0x40,
+	.reg = PWRCL_REG_OFFSET + MUX_OFFSET,
 	.shift = 0,
 	.width = 2,
 	.pll = &pwrcl_pll.clkr.hw,
@@ -338,7 +349,7 @@ int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
 };
 
 static struct clk_cpu_8996_mux perfcl_pmux = {
-	.reg = 0x80040,
+	.reg = PERFCL_REG_OFFSET + MUX_OFFSET,
 	.shift = 0,
 	.width = 2,
 	.pll = &perfcl_pll.clkr.hw,
@@ -402,6 +413,10 @@ struct clk_regmap *clks[] = {
 	clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
 	clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
 
+	/* Enable alt PLLs */
+	clk_prepare_enable(pwrcl_alt_pll.clkr.hw.clk);
+	clk_prepare_enable(perfcl_alt_pll.clkr.hw.clk);
+
 	ret = clk_notifier_register(pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb);
 	if (ret)
 		return ret;
@@ -411,10 +426,48 @@ struct clk_regmap *clks[] = {
 	return ret;
 }
 
+#define CPU_AFINITY_MASK 0xFFF
+#define PWRCL_CPU_REG_MASK 0x3
+#define PERFCL_CPU_REG_MASK 0x103
+
+#define L2ACDCR_REG 0x580ULL
+#define L2ACDTD_REG 0x581ULL
+#define L2ACDDVMRC_REG 0x584ULL
+#define L2ACDSSCR_REG 0x589ULL
+
+static DEFINE_SPINLOCK(acd_lock);
+
+static void qcom_cpu_clk_msm8996_acd_init(void __iomem *base)
+{
+	u64 hwid;
+	unsigned long flags;
+
+	spin_lock_irqsave(&acd_lock, flags);
+
+	hwid = read_cpuid_mpidr() & CPU_AFINITY_MASK;
+
+	kryo_l2_set_indirect_reg(L2ACDTD_REG, 0x00006A11);
+	kryo_l2_set_indirect_reg(L2ACDDVMRC_REG, 0x000E0F0F);
+	kryo_l2_set_indirect_reg(L2ACDSSCR_REG, 0x00000601);
+
+	if (PWRCL_CPU_REG_MASK == (hwid | PWRCL_CPU_REG_MASK)) {
+		writel(0xF, base + PWRCL_REG_OFFSET + SSSCTL_OFFSET);
+		wmb();
+		kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002C5FFD);
+	}
+
+	if (PERFCL_CPU_REG_MASK == (hwid | PERFCL_CPU_REG_MASK)) {
+		kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002C5FFD);
+		writel(0xF, base + PERFCL_REG_OFFSET + SSSCTL_OFFSET);
+		wmb();
+	}
+
+	spin_unlock_irqrestore(&acd_lock, flags);
+}
+
 static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev)
 {
 	int ret;
-	void __iomem *base;
 	struct resource *res;
 	struct regmap *regmap;
 	struct clk_hw_onecell_data *data;
@@ -438,6 +491,8 @@ static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	qcom_cpu_clk_msm8996_acd_init(base);
+
 	data->hws[0] = &pwrcl_pmux.clkr.hw;
 	data->hws[1] = &perfcl_pmux.clkr.hw;
 	data->num = 2;
-- 
1.9.1

  parent reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-14 13:11 [PATCH v6 00/14] CPU scaling support " Ilia Lin
2018-05-14 13:11 ` [PATCH v6 01/14] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2018-05-14 13:11 ` [PATCH v6 02/14] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2018-05-14 13:11 ` [PATCH v6 03/14] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2018-05-14 13:11 ` [PATCH v6 04/14] clk: qcom: Add DT bindings for " Ilia Lin
2018-05-14 13:11 ` [PATCH v6 05/14] clk: qcom: cpu-8996: Add support to switch to alternate PLL Ilia Lin
2018-05-14 13:11 ` [PATCH v6 06/14] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2018-05-14 13:11 ` Ilia Lin [this message]
2018-05-14 13:11 ` [PATCH v6 08/14] dt: qcom: Add opp and thermal to the msm8996 Ilia Lin
2018-05-15  4:04   ` Viresh Kumar
2018-05-14 13:11 ` [PATCH v6 09/14] regulator: qcom_spmi: Add support for SAW Ilia Lin
2018-05-14 13:11 ` [PATCH v6 10/14] dt-bindings: qcom_spmi: Add support for SAW documentation Ilia Lin
2018-05-14 13:11 ` [PATCH v6 11/14] dt: qcom: Add SAW regulator for 8x96 CPUs Ilia Lin
2018-05-15  4:04   ` Viresh Kumar
2018-05-14 13:11 ` [PATCH v6 12/14] cpufreq: Add Kryo CPU scaling driver Ilia Lin
2018-05-15  4:09   ` Viresh Kumar
2018-05-14 13:11 ` [PATCH v6 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu Ilia Lin
2018-05-15  4:09   ` Viresh Kumar
2018-05-14 13:12 ` [PATCH v6 14/14] dt: qcom: Add qcom-cpufreq-kryo driver configuration Ilia Lin
2018-05-15  4:11   ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526303520-5843-8-git-send-email-ilialin@codeaurora.org \
    --to=ilialin@codeaurora.org \
    --cc=amit.kucheria@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=celster@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.dechesne@linaro.org \
    --cc=nm@ti.com \
    --cc=rjw@rjwysocki.net \
    --cc=rnayak@codeaurora.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tfinkel@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git