Linux-ARM-MSM Archive on
 help / color / Atom feed
From: Jayant Shekhar <>
	Jayant Shekhar <>,,,,,,
Subject: [v7 0/3] Use interconnect API in MDSS on SDM845
Date: Thu, 24 Jan 2019 10:39:49 +0530
Message-ID: <> (raw)

The interconnect API provides an interface for consumer drivers to express
their bandwidth needs in the SoC. This data is aggregated and the on-chip
interconnect hardware is configured to the appropriate power/performance

MDSS is one of the interconnect consumers which uses the interconnect APIs
to get the path between endpoints and set its bandwidth requirements
for the given interconnected path.

Subsequently, there is a clean up patch to remove all the references
of the DPU custom bus scaling.

There is corresponding DT patch with the source and destination ports
defined for display driver which will be sent separately.

Changes in v2:
    - Remove error log and unnecessary check (Jordan Crouse)
    - Fixed build error due to partial clean up

Changes in v3:
    - Remove common property definitions (Rob Herring)
    - Code clean up involving variable name change, removal
      of extra paranthesis and variables (Matthias Kaehlcke)
    - Condense multiple lines into a single line (Sean Paul)

Changes in v4:
   - Add comments, spacings, tabs, proper port name and icc macro
   - Use port macros and change port string names (Georgi Djakov)

Changes in v5:
   - Updated commit text and parenthesis alignment (Georgi Djakov)

Changes in v6:
   - Change icc_set to icc_set_bw (Doug Anderson)

Changes in v7:
   - Fixed a typo

Jayant Shekhar (3):
  drm/msm/dpu: clean up references of DPU custom bus scaling
  drm/msm/dpu: Integrate interconnect API in MDSS
  dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on

 .../devicetree/bindings/display/msm/dpu.txt        |  10 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c      | 174 ++++++++-------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h      |   4 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c           |  13 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c           |  49 +++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c   |  47 ++----
 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h   |  68 --------
 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h          |  22 +--
 8 files changed, 144 insertions(+), 243 deletions(-)

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Freedreno mailing list

             reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-24  5:09 Jayant Shekhar [this message]
     [not found] ` <>
2019-01-24  5:09   ` [v7 1/3] drm/msm/dpu: clean up references of DPU custom bus scaling Jayant Shekhar
2019-01-24  5:09 ` [v7 2/3] drm/msm/dpu: Integrate interconnect API in MDSS Jayant Shekhar
2019-01-24  5:09 ` [v7 3/3] dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845 Jayant Shekhar
2019-01-30 15:48   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on

Archives are clonable:
	git clone --mirror linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ \
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone