From: Taniya Das <tdas@codeaurora.org>
To: "Stephen Boyd" <sboyd@kernel.org>,
"Michael Turquette " <mturquette@baylibre.com>
Cc: David Brown <david.brown@linaro.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, robh@kernel.org, robh+dt@kernel.org,
Taniya Das <tdas@codeaurora.org>
Subject: [PATCH v2 6/8] dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings
Date: Fri, 15 Nov 2019 15:35:02 +0530 [thread overview]
Message-ID: <1573812304-24074-7-git-send-email-tdas@codeaurora.org> (raw)
In-Reply-To: <1573812304-24074-1-git-send-email-tdas@codeaurora.org>
The VIDEOCC clock provider have a bunch of generic properties that
are needed in a device tree. Add a YAML schemas for those.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/clock/qcom,videocc.txt | 18 -------
.../devicetree/bindings/clock/qcom,videocc.yaml | 61 ++++++++++++++++++++++
2 files changed, 61 insertions(+), 18 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/qcom,videocc.txt
create mode 100644 Documentation/devicetree/bindings/clock/qcom,videocc.yaml
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.txt b/Documentation/devicetree/bindings/clock/qcom,videocc.txt
deleted file mode 100644
index 8a8622c..0000000
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Qualcomm Video Clock & Reset Controller Binding
------------------------------------------------
-
-Required properties :
-- compatible : shall contain "qcom,sdm845-videocc"
-- reg : shall contain base register location and length
-- #clock-cells : from common clock binding, shall contain 1.
-- #power-domain-cells : from generic power domain binding, shall contain 1.
-- #reset-cells : from common reset binding, shall contain 1.
-
-Example:
- videocc: clock-controller@ab00000 {
- compatible = "qcom,sdm845-videocc";
- reg = <0xab00000 0x10000>;
- #clock-cells = <1>;
- #power-domain-cells = <1>;
- #reset-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
new file mode 100644
index 0000000..fc3fcca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller Binding
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm video clock control module which supports the clocks, resets and
+ power domains.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sdm845-videocc
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: xo
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+examples:
+ # Example of VIDEOCC with clock node properties for SDM845:
+ - |
+ clock-controller@ab00000 {
+ compatible = "qcom,sdm845-videocc";
+ reg = <0xab00000 0x10000>;
+ clocks = <&rpmhcc 0>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
next prev parent reply other threads:[~2019-11-15 10:06 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-15 10:04 [PATCH v2 0/8] Add GPU & Video Clock controller driver for SC7180 Taniya Das
2019-11-15 10:04 ` [PATCH v2 1/8] clk: qcom: alpha-pll: Remove useless read from set rate Taniya Das
2019-12-24 6:37 ` Stephen Boyd
2019-11-15 10:04 ` [PATCH v2 2/8] clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration Taniya Das
2019-12-24 6:37 ` Stephen Boyd
2019-11-15 10:04 ` [PATCH v2 3/8] dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings Taniya Das
2019-11-15 15:11 ` Jeffrey Hugo
2019-11-26 18:11 ` Stephen Boyd
2019-11-27 4:06 ` Taniya Das
2019-12-19 5:32 ` Stephen Boyd
2019-12-27 6:43 ` Taniya Das
2019-11-15 10:05 ` [PATCH v2 4/8] dt-bindings: clock: Introduce QCOM Graphics " Taniya Das
2019-11-15 10:05 ` [PATCH v2 5/8] clk: qcom: Add graphics clock controller driver for SC7180 Taniya Das
2019-11-15 10:05 ` Taniya Das [this message]
2019-11-15 10:05 ` [PATCH v2 7/8] dt-bindings: clock: Introduce QCOM Video clock bindings Taniya Das
2019-12-03 17:22 ` Rob Herring
2019-11-15 10:05 ` [PATCH v2 8/8] clk: qcom: Add video clock controller driver for SC7180 Taniya Das
2019-12-24 2:30 ` Stephen Boyd
2019-12-27 6:41 ` Taniya Das
2019-12-24 2:32 ` [PATCH v2 0/8] Add GPU & Video Clock " Stephen Boyd
2019-12-27 6:44 ` Taniya Das
-- strict thread matches above, loose matches on Subject: below --
2019-11-15 9:56 Taniya Das
2019-11-15 9:56 ` [PATCH v2 6/8] dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings Taniya Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1573812304-24074-7-git-send-email-tdas@codeaurora.org \
--to=tdas@codeaurora.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).