Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Thara Gopinath <thara.gopinath@linaro.org>
To: edubezval@gmail.com, rui.zhang@intel.com, ulf.hansson@linaro.org,
	daniel.lezcano@linaro.org, bjorn.andersson@linaro.org,
	agross@kernel.org
Cc: amit.kucheria@verdurent.com, mark.rutland@arm.com,
	rjw@rjwysocki.net, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [Patch v4 4/7] thermal: Add generic power domain warming device driver.
Date: Wed, 20 Nov 2019 07:56:30 -0500
Message-ID: <1574254593-16078-5-git-send-email-thara.gopinath@linaro.org> (raw)
In-Reply-To: <1574254593-16078-1-git-send-email-thara.gopinath@linaro.org>

Resources modeled as power domains in linux kenrel can  be used to warm the
SoC(eg. mx power domain on sdm845).  To support this feature, introduce a
generic power domain warming device driver that can be plugged into the
thermal framework (The thermal framework itself requires further
modifiction to support a warming device in place of a cooling device.
Those extensions are not introduced in this patch series).

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---
v3->v4:
	- Removed late_init hook pd_warming_device_ops.
	- Use of_genpd_add_device instead of pm_genpd_add_device to attach
	  device to the generic power domain.
	- Use thermal_of_cooling_device_parent_register to register the
	  cooling device so that the device with genpd attached can be
	  made parent of the cooling device.
	- With above changes, remove reference to generic_pm_domain in
	  pd_warming_device.

 drivers/thermal/Kconfig              |  10 +++
 drivers/thermal/Makefile             |   2 +
 drivers/thermal/pwr_domain_warming.c | 138 +++++++++++++++++++++++++++++++++++
 include/linux/pwr_domain_warming.h   |  29 ++++++++
 4 files changed, 179 insertions(+)
 create mode 100644 drivers/thermal/pwr_domain_warming.c
 create mode 100644 include/linux/pwr_domain_warming.h

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 001a21a..0c5c93e 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -187,6 +187,16 @@ config DEVFREQ_THERMAL
 
 	  If you want this support, you should say Y here.
 
+config PWR_DOMAIN_WARMING_THERMAL
+	bool "Power Domain based warming device"
+	depends on PM_GENERIC_DOMAINS_OF
+	help
+	  This implements the generic power domain based warming
+	  mechanism through increasing the performance state of
+	  a power domain.
+
+	  If you want this support, you should say Y here.
+
 config THERMAL_EMULATION
 	bool "Thermal emulation mode support"
 	help
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 74a37c7..382c64a 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -27,6 +27,8 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL)	+= clock_cooling.o
 # devfreq cooling
 thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
 
+thermal_sys-$(CONFIG_PWR_DOMAIN_WARMING_THERMAL)	+= pwr_domain_warming.o
+
 # platform thermal drivers
 obj-y				+= broadcom/
 obj-$(CONFIG_THERMAL_MMIO)		+= thermal_mmio.o
diff --git a/drivers/thermal/pwr_domain_warming.c b/drivers/thermal/pwr_domain_warming.c
new file mode 100644
index 0000000..40162b9
--- /dev/null
+++ b/drivers/thermal/pwr_domain_warming.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Ltd
+ */
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/pwr_domain_warming.h>
+
+struct pd_warming_device {
+	struct thermal_cooling_device *cdev;
+	struct device dev;
+	int max_state;
+	int cur_state;
+	bool runtime_resumed;
+};
+
+static int pd_wdev_get_max_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	struct pd_warming_device *pd_wdev = cdev->devdata;
+
+	*state = pd_wdev->max_state;
+	return 0;
+}
+
+static int pd_wdev_get_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	struct pd_warming_device *pd_wdev = cdev->devdata;
+
+	*state = dev_pm_genpd_get_performance_state(&pd_wdev->dev);
+
+	return 0;
+}
+
+static int pd_wdev_set_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long state)
+{
+	struct pd_warming_device *pd_wdev = cdev->devdata;
+	struct device *dev = &pd_wdev->dev;
+	int ret;
+
+	ret = dev_pm_genpd_set_performance_state(dev, state);
+
+	if (ret)
+		return ret;
+
+	if (state && !pd_wdev->runtime_resumed) {
+		ret = pm_runtime_get_sync(dev);
+		pd_wdev->runtime_resumed = true;
+	} else if (!state && pd_wdev->runtime_resumed) {
+		ret = pm_runtime_put(dev);
+		pd_wdev->runtime_resumed = false;
+	}
+
+	return ret;
+}
+
+static struct thermal_cooling_device_ops pd_warming_device_ops = {
+	.get_max_state	= pd_wdev_get_max_state,
+	.get_cur_state	= pd_wdev_get_cur_state,
+	.set_cur_state	= pd_wdev_set_cur_state,
+};
+
+struct thermal_cooling_device *
+pwr_domain_warming_register(struct device *parent, char *pd_name, int pd_id)
+{
+	struct pd_warming_device *pd_wdev;
+	struct of_phandle_args pd_args;
+	int ret;
+
+	pd_wdev = kzalloc(sizeof(*pd_wdev), GFP_KERNEL);
+	if (!pd_wdev)
+		return ERR_PTR(-ENOMEM);
+
+	dev_set_name(&pd_wdev->dev, "%s_warming_dev", pd_name);
+	pd_wdev->dev.parent = parent;
+
+	ret = device_register(&pd_wdev->dev);
+	if (ret)
+		goto error;
+
+	pd_args.np = parent->of_node;
+	pd_args.args[0] = pd_id;
+	pd_args.args_count = 1;
+
+	ret = of_genpd_add_device(&pd_args, &pd_wdev->dev);
+
+	if (ret)
+		goto error;
+
+	ret = dev_pm_genpd_performance_state_count(&pd_wdev->dev);
+	if (ret < 0)
+		goto error;
+
+	pd_wdev->max_state = ret - 1;
+	pm_runtime_enable(&pd_wdev->dev);
+	pd_wdev->runtime_resumed = false;
+
+	pd_wdev->cdev = thermal_of_cooling_device_parent_register
+					(NULL, parent, pd_name, pd_wdev,
+					 &pd_warming_device_ops);
+	if (IS_ERR(pd_wdev->cdev)) {
+		pr_err("unable to register %s cooling device\n", pd_name);
+		pm_runtime_disable(&pd_wdev->dev);
+		ret = PTR_ERR(pd_wdev->cdev);
+		goto error;
+	}
+
+	return pd_wdev->cdev;
+error:
+	put_device(&pd_wdev->dev);
+	kfree(pd_wdev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(pwr_domain_warming_register);
+
+void pwr_domain_warming_unregister(struct thermal_cooling_device *cdev)
+{
+	struct pd_warming_device *pd_wdev = cdev->devdata;
+	struct device *dev = &pd_wdev->dev;
+
+	if (pd_wdev->runtime_resumed) {
+		dev_pm_genpd_set_performance_state(dev, 0);
+		pm_runtime_put(dev);
+		pd_wdev->runtime_resumed = false;
+	}
+	pm_runtime_disable(dev);
+	thermal_cooling_device_unregister(cdev);
+	kfree(pd_wdev);
+}
+EXPORT_SYMBOL_GPL(pwr_domain_warming_unregister);
diff --git a/include/linux/pwr_domain_warming.h b/include/linux/pwr_domain_warming.h
new file mode 100644
index 0000000..cb6550d
--- /dev/null
+++ b/include/linux/pwr_domain_warming.h
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Ltd.
+ */
+#ifndef __PWR_DOMAIN_WARMING_H__
+#define __PWR_DOMAIN_WARMING_H__
+
+#include <linux/pm_domain.h>
+#include <linux/thermal.h>
+
+#ifdef CONFIG_PWR_DOMAIN_WARMING_THERMAL
+struct thermal_cooling_device *
+pwr_domain_warming_register(struct device *parent, char *pd_name, int pd_id);
+
+void pwr_domain_warming_unregister(struct thermal_cooling_device *cdev);
+
+#else
+static inline struct thermal_cooling_device *
+pwr_domain_warming_register(struct device *parent, char *pd_name, int pd_id)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void
+pwr_domain_warming_unregister(struct thermal_cooling_device *cdev)
+{
+}
+#endif /* CONFIG_PWR_DOMAIN_WARMING_THERMAL */
+#endif /* __PWR_DOMAIN_WARMING_H__ */
-- 
2.1.4


  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-20 12:56 [Patch v4 0/7] Introduce Power domain based " Thara Gopinath
2019-11-20 12:56 ` [Patch v4 1/7] PM/Domains: Add support for retrieving genpd performance states information Thara Gopinath
2019-11-20 12:56 ` [Patch v4 2/7] soc: qcom: rpmhpd: Introduce function to retrieve power domain performance state count Thara Gopinath
2020-02-04 16:10   ` Ulf Hansson
2019-11-20 12:56 ` [Patch v4 3/7] thermal: core: Allow cooling devices to register a parent Thara Gopinath
2020-02-04 16:22   ` Ulf Hansson
2019-11-20 12:56 ` Thara Gopinath [this message]
2020-02-04 16:54   ` [Patch v4 4/7] thermal: Add generic power domain warming device driver Ulf Hansson
2020-03-01 23:00     ` Thara Gopinath
2020-03-13 13:13       ` Ulf Hansson
2020-03-13 15:02         ` Thara Gopinath
2019-11-20 12:56 ` [Patch v4 5/7] soc: qcom: Extend RPMh power controller driver to register warming devices Thara Gopinath
2020-02-04 17:40   ` Ulf Hansson
2020-03-01 23:36     ` Thara Gopinath
2019-11-20 12:56 ` [Patch v4 6/7] dt-bindings: soc: qcom: Extend RPMh power controller binding to describe thermal warming device Thara Gopinath
2019-11-22 23:59   ` Rob Herring
2020-02-04 17:41   ` Ulf Hansson
2020-03-01 23:37     ` Thara Gopinath
2019-11-20 12:56 ` [Patch v4 7/7] arm64: dts: qcom: Indicate rpmhpd hosts a power domain that can be used as a " Thara Gopinath
2020-02-04 17:40   ` Ulf Hansson
2020-01-09 15:02 ` [Patch v4 0/7] Introduce Power domain based warming device driver Thara Gopinath

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1574254593-16078-5-git-send-email-thara.gopinath@linaro.org \
    --to=thara.gopinath@linaro.org \
    --cc=agross@kernel.org \
    --cc=amit.kucheria@verdurent.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rjw@rjwysocki.net \
    --cc=rui.zhang@intel.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git