linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maulik Shah <mkshah@codeaurora.org>
To: swboyd@chromium.org, mka@chromium.org, evgreen@chromium.org,
	bjorn.andersson@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	agross@kernel.org, dianders@chromium.org, rnayak@codeaurora.org,
	ilina@codeaurora.org, lsrao@codeaurora.org,
	Maulik Shah <mkshah@codeaurora.org>
Subject: [PATCH v13 2/5] soc: qcom: rpmh: Update dirty flag only when data changes
Date: Mon,  9 Mar 2020 15:00:33 +0530	[thread overview]
Message-ID: <1583746236-13325-3-git-send-email-mkshah@codeaurora.org> (raw)
In-Reply-To: <1583746236-13325-1-git-send-email-mkshah@codeaurora.org>

Currently rpmh ctrlr dirty flag is set for all cases regardless of data
is really changed or not. Add changes to update dirty flag when data is
changed to newer values. Update dirty flag everytime when data in batch
cache is updated since rpmh_flush() may get invoked from any CPU instead
of only last CPU going to low power mode.

Also move dirty flag updates to happen from within cache_lock and remove
unnecessary INIT_LIST_HEAD() call and a default case from switch.

Fixes: 600513dfeef3 ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 drivers/soc/qcom/rpmh.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
index eb0ded0..03630ae 100644
--- a/drivers/soc/qcom/rpmh.c
+++ b/drivers/soc/qcom/rpmh.c
@@ -119,6 +119,7 @@ static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
 {
 	struct cache_req *req;
 	unsigned long flags;
+	u32 old_sleep_val, old_wake_val;
 
 	spin_lock_irqsave(&ctrlr->cache_lock, flags);
 	req = __find_req(ctrlr, cmd->addr);
@@ -133,26 +134,27 @@ static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
 
 	req->addr = cmd->addr;
 	req->sleep_val = req->wake_val = UINT_MAX;
-	INIT_LIST_HEAD(&req->list);
 	list_add_tail(&req->list, &ctrlr->cache);
 
 existing:
+	old_sleep_val = req->sleep_val;
+	old_wake_val = req->wake_val;
+
 	switch (state) {
 	case RPMH_ACTIVE_ONLY_STATE:
-		if (req->sleep_val != UINT_MAX)
-			req->wake_val = cmd->data;
-		break;
 	case RPMH_WAKE_ONLY_STATE:
 		req->wake_val = cmd->data;
 		break;
 	case RPMH_SLEEP_STATE:
 		req->sleep_val = cmd->data;
 		break;
-	default:
-		break;
 	}
 
-	ctrlr->dirty = true;
+	ctrlr->dirty = (req->sleep_val != old_sleep_val ||
+			req->wake_val != old_wake_val) &&
+			req->sleep_val != UINT_MAX &&
+			req->wake_val != UINT_MAX;
+
 unlock:
 	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 
@@ -287,6 +289,7 @@ static void cache_batch(struct rpmh_ctrlr *ctrlr, struct batch_cache_req *req)
 
 	spin_lock_irqsave(&ctrlr->cache_lock, flags);
 	list_add_tail(&req->list, &ctrlr->batch_cache);
+	ctrlr->dirty = true;
 	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 }
 
@@ -323,6 +326,7 @@ static void invalidate_batch(struct rpmh_ctrlr *ctrlr)
 	list_for_each_entry_safe(req, tmp, &ctrlr->batch_cache, list)
 		kfree(req);
 	INIT_LIST_HEAD(&ctrlr->batch_cache);
+	ctrlr->dirty = true;
 	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 }
 
@@ -507,7 +511,6 @@ int rpmh_invalidate(const struct device *dev)
 	int ret;
 
 	invalidate_batch(ctrlr);
-	ctrlr->dirty = true;
 
 	do {
 		ret = rpmh_rsc_invalidate(ctrlr_to_drv(ctrlr));
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2020-03-09  9:31 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-09  9:30 [PATCH v13 0/4] Invoke rpmh_flush for non OSI targets Maulik Shah
2020-03-09  9:30 ` [PATCH v13 1/5] arm64: dts: qcom: sc7180: Add cpuidle low power states Maulik Shah
2020-03-09  9:30 ` Maulik Shah [this message]
2020-03-09 23:42   ` [PATCH v13 2/5] soc: qcom: rpmh: Update dirty flag only when data changes Doug Anderson
2020-03-13  8:53     ` Maulik Shah
2020-03-09  9:30 ` [PATCH v13 3/5] soc: qcom: rpmh: Invalidate SLEEP and WAKE TCSes before flushing new data Maulik Shah
2020-03-09 23:42   ` Doug Anderson
2020-03-10 11:09     ` Maulik Shah
2020-03-09  9:30 ` [PATCH v13 4/5] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches Maulik Shah
2020-03-09 23:43   ` Doug Anderson
2020-03-10 11:19     ` Maulik Shah
2020-03-10 15:46       ` Doug Anderson
2020-03-11  6:36         ` Maulik Shah
2020-03-11 23:06           ` Doug Anderson
     [not found]             ` <5a5274ac-41f4-b06d-ff49-c00cef67aa7f@codeaurora.org>
2020-03-12 15:11               ` Doug Anderson
2020-03-25 17:15                 ` Maulik Shah
2020-03-26 18:08                   ` Doug Anderson
2020-03-09  9:30 ` [PATCH v13 5/5] drivers: qcom: Update rpmh clients to use start and end transactions Maulik Shah
2020-03-09 23:44   ` Doug Anderson
2020-03-10 11:46     ` Maulik Shah
2020-03-10 15:46       ` Doug Anderson
2020-03-11 23:02   ` Doug Anderson
2020-03-09 23:42 ` [PATCH v13 0/4] Invoke rpmh_flush for non OSI targets Doug Anderson
2020-03-10 11:49   ` Maulik Shah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1583746236-13325-3-git-send-email-mkshah@codeaurora.org \
    --to=mkshah@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=ilina@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lsrao@codeaurora.org \
    --cc=mka@chromium.org \
    --cc=rnayak@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).