From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.6 required=3.0 tests=DKIM_INVALID,DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY, SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 720EFC2BAEE for ; Tue, 24 Mar 2020 15:45:46 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 362C620774 for ; Tue, 24 Mar 2020 15:45:46 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mg.codeaurora.org header.i=@mg.codeaurora.org header.b="cwkUlLPe" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728301AbgCXPpp (ORCPT ); Tue, 24 Mar 2020 11:45:45 -0400 Received: from mail26.static.mailgun.info ([104.130.122.26]:64969 "EHLO mail26.static.mailgun.info" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727978AbgCXPpp (ORCPT ); Tue, 24 Mar 2020 11:45:45 -0400 DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1585064744; h=References: In-Reply-To: Message-Id: Date: Subject: Cc: To: From: Sender; bh=IrkciGFCAIGY4X0BKMBEidNgzh9AZKRe2tWhQgipA8A=; b=cwkUlLPeBrWgDjbYeBtzO6g3UmzR0UiEG1jMcAAcwzf5mvpxiHHnrTMx0hVbKaCj00jUuSZ/ X589gDiivTy20woaryK4qflB5gpTdT8wRVQM3ScrGVzUGEYvSZlPPysd5uWUZiDqTQPOMgSq v0zWj8Qw9cgo0ks0IWmp9dVciiI= X-Mailgun-Sending-Ip: 104.130.122.26 X-Mailgun-Sid: WyI1MzIzYiIsICJsaW51eC1hcm0tbXNtQHZnZXIua2VybmVsLm9yZyIsICJiZTllNGEiXQ== Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by mxa.mailgun.org with ESMTP id 5e7a2b23.7fcbcfe5b3b0-smtp-out-n04; Tue, 24 Mar 2020 15:45:39 -0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 1001) id 0216CC44793; Tue, 24 Mar 2020 15:45:37 +0000 (UTC) Received: from jprakash-linux.qualcomm.com (blr-c-bdr-fw-01_GlobalNAT_AllZones-Outside.qualcomm.com [103.229.19.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: jprakash) by smtp.codeaurora.org (Postfix) with ESMTPSA id 9AA1FC433CB; Tue, 24 Mar 2020 15:45:27 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 9AA1FC433CB Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=none smtp.mailfrom=jprakash@codeaurora.org From: Jishnu Prakash To: agross@kernel.org, bjorn.andersson@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, mka@chromium.org, linus.walleij@linaro.org, sboyd@codeaurora.org, Jonathan.Cameron@huawei.com, smohanad@codeaurora.org, kgunda@codeaurora.org, aghayal@codeaurora.org, Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Rob Herring , Mark Rutland , Jishnu Prakash , Amit Kucheria , Andy Gross , linux-iio@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org, linux-arm-msm-owner@vger.kernel.org Subject: [PATCH 1/3] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format Date: Tue, 24 Mar 2020 21:14:08 +0530 Message-Id: <1585064650-16235-2-git-send-email-jprakash@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1585064650-16235-1-git-send-email-jprakash@codeaurora.org> References: <1585064650-16235-1-git-send-email-jprakash@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Convert the adc bindings from .txt to .yaml format. Signed-off-by: Jishnu Prakash --- .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 173 -------------------- .../bindings/iio/adc/qcom,spmi-vadc.yaml | 178 +++++++++++++++++++++ 2 files changed, 178 insertions(+), 173 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt deleted file mode 100644 index c878768..0000000 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt +++ /dev/null @@ -1,173 +0,0 @@ -Qualcomm's SPMI PMIC ADC - -- SPMI PMIC voltage ADC (VADC) provides interface to clients to read - voltage. The VADC is a 15-bit sigma-delta ADC. -- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read - voltage. The VADC is a 16-bit sigma-delta ADC. - -VADC node: - -- compatible: - Usage: required - Value type: - Definition: Should contain "qcom,spmi-vadc". - Should contain "qcom,spmi-adc5" for PMIC5 ADC driver. - Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver. - Should contain "qcom,pms405-adc" for PMS405 PMIC - -- reg: - Usage: required - Value type: - Definition: VADC base address in the SPMI PMIC register map. - -- #address-cells: - Usage: required - Value type: - Definition: Must be one. Child node 'reg' property should define ADC - channel number. - -- #size-cells: - Usage: required - Value type: - Definition: Must be zero. - -- #io-channel-cells: - Usage: required - Value type: - Definition: Must be one. For details about IIO bindings see: - Documentation/devicetree/bindings/iio/iio-bindings.txt - -- interrupts: - Usage: optional - Value type: - Definition: End of conversion interrupt. - -Channel node properties: - -- reg: - Usage: required - Value type: - Definition: ADC channel number. - See include/dt-bindings/iio/qcom,spmi-vadc.h - -- label: - Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2" - Value type: - Definition: ADC input of the platform as seen in the schematics. - For thermistor inputs connected to generic AMUX or GPIO inputs - these can vary across platform for the same pins. Hence select - the platform schematics name for this channel. - -- qcom,decimation: - Usage: optional - Value type: - Definition: This parameter is used to decrease ADC sampling rate. - Quicker measurements can be made by reducing decimation ratio. - - For compatible property "qcom,spmi-vadc", valid values are - 512, 1024, 2048, 4096. If property is not found, default value - of 512 will be used. - - For compatible property "qcom,spmi-adc5", valid values are 250, 420 - and 840. If property is not found, default value of 840 is used. - - For compatible property "qcom,spmi-adc-rev2", valid values are 256, - 512 and 1024. If property is not present, default value is 1024. - -- qcom,pre-scaling: - Usage: optional - Value type: - Definition: Used for scaling the channel input signal before the signal is - fed to VADC. The configuration for this node is to know the - pre-determined ratio and use it for post scaling. Select one from - the following options. - <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10> - If property is not found default value depending on chip will be used. - -- qcom,ratiometric: - Usage: optional - Value type: - Definition: Channel calibration type. - - For compatible property "qcom,spmi-vadc", if this property is - specified VADC will use the VDD reference (1.8V) and GND for - channel calibration. If property is not found, channel will be - calibrated with 0.625V and 1.25V reference channels, also - known as absolute calibration. - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", - if this property is specified VADC will use the VDD reference - (1.875V) and GND for channel calibration. If property is not found, - channel will be calibrated with 0V and 1.25V reference channels, - also known as absolute calibration. - -- qcom,hw-settle-time: - Usage: optional - Value type: - Definition: Time between AMUX getting configured and the ADC starting - conversion. The 'hw_settle_time' is an index used from valid values - and programmed in hardware to achieve the hardware settling delay. - - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2", - Delay = 100us * (hw_settle_time) for hw_settle_time < 11, - and 2ms * (hw_settle_time - 10) otherwise. - Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800, - 900 us and 1, 2, 4, 6, 8, 10 ms. - If property is not found, channel will use 0us. - - For compatible property "qcom,spmi-adc5", delay = 15us for - value 0, 100us * (value) for values < 11, - and 2ms * (value - 10) otherwise. - Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800, - 900 us and 1, 2, 4, 6, 8, 10 ms - Certain controller digital versions have valid values of - 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms - If property is not found, channel will use 15us. - -- qcom,avg-samples: - Usage: optional - Value type: - Definition: Number of samples to be used for measurement. - Averaging provides the option to obtain a single measurement - from the ADC that is an average of multiple samples. The value - selected is 2^(value). - - For compatible property "qcom,spmi-vadc", valid values - are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 - If property is not found, 1 sample will be used. - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", - valid values are: 1, 2, 4, 8, 16 - If property is not found, 1 sample will be used. - -NOTE: - -For compatible property "qcom,spmi-vadc" following channels, also known as -reference point channels, are used for result calibration and their channel -configuration nodes should be defined: -VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV, -VADC_GND_REF and VADC_VDD_VADC. - -Example: - -#include -#include -/* ... */ - - /* VADC node */ - pmic_vadc: vadc@3100 { - compatible = "qcom,spmi-vadc"; - reg = <0x3100>; - interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - #io-channel-cells = <1>; - io-channel-ranges; - - /* Channel node */ - adc-chan@VADC_LR_MUX10_USB_ID { - reg = ; - qcom,decimation = <512>; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,avg-samples = <1>; - qcom,pre-scaling = <1 3>; - }; - }; - - /* IIO client node */ - usb { - io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>; - io-channel-names = "vadc"; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml new file mode 100644 index 0000000..72db14c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's SPMI PMIC ADC + +maintainers: + - Andy Gross + - Bjorn Andersson + +description: | + SPMI PMIC voltage ADC (VADC) provides interface to clients to read + voltage. The VADC is a 15-bit sigma-delta ADC. + SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read + voltage. The VADC is a 16-bit sigma-delta ADC. + +properties: + compatible: + enum: + - qcom,spmi-vadc + - qcom,spmi-adc5 + - qcom,spmi-adc-rev2 + - qcom,pms405-adc + + reg: + description: VADC base address in the SPMI PMIC register map + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#io-channel-cells': + const: 1 + + interrupts: + maxItems: 1 + description: + End of conversion interrupt. + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - '#io-channel-cells' + +patternProperties: + "^[a-z0-9-_@]$": + type: object + description: | + Represents the external channels which are connected to the ADC. + For compatible property "qcom,spmi-vadc" following channels, also known as + reference point channels, are used for result calibration and their channel + configuration nodes should be defined: + VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV, + VADC_GND_REF and VADC_VDD_VADC. + + properties: + reg: + description: | + ADC channel number. + See include/dt-bindings/iio/qcom,spmi-vadc.h + + label: + description: | + ADC input of the platform as seen in the schematics. + For thermistor inputs connected to generic AMUX or GPIO inputs + these can vary across platform for the same pins. Hence select + the platform schematics name for this channel. It is required + for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2". + allOf: + - $ref: /schemas/types.yaml#/definitions/string + + qcom,decimation: + description: | + This parameter is used to decrease ADC sampling rate. + Quicker measurements can be made by reducing decimation ratio. + - For compatible property "qcom,spmi-vadc", valid values are + 512, 1024, 2048, 4096. If property is not found, default value + of 512 will be used. + - For compatible property "qcom,spmi-adc5", valid values are 250, 420 + and 840. If property is not found, default value of 840 is used. + - For compatible property "qcom,spmi-adc-rev2", valid values are 256, + 512 and 1024. If property is not present, default value is 1024. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,pre-scaling: + description: | + Used for scaling the channel input signal before the signal is + fed to VADC. The configuration for this node is to know the + pre-determined ratio and use it for post scaling. Select one from + the following options. + <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10> + If property is not found default value depending on chip will be used. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,ratiometric: + description: | + Channel calibration type. + - For compatible property "qcom,spmi-vadc", if this property is + specified VADC will use the VDD reference (1.8V) and GND for + channel calibration. If property is not found, channel will be + calibrated with 0.625V and 1.25V reference channels, also + known as absolute calibration. + - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", + if this property is specified VADC will use the VDD reference (1.875V) + and GND for channel calibration. If property is not found, channel + will be calibrated with 0V and 1.25V reference channels, also known + as absolute calibration. + type: boolean + + qcom,hw-settle-time: + description: | + Time between AMUX getting configured and the ADC starting + conversion. The 'hw_settle_time' is an index used from valid values + and programmed in hardware to achieve the hardware settling delay. + - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2", + Delay = 100us * (hw_settle_time) for hw_settle_time < 11, + and 2ms * (hw_settle_time - 10) otherwise. + Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800, + 900 us and 1, 2, 4, 6, 8, 10 ms. + If property is not found, channel will use 0us. + - For compatible property "qcom,spmi-adc5", delay = 15us for + value 0, 100us * (value) for values < 11, + and 2ms * (value - 10) otherwise. + Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800, + 900 us and 1, 2, 4, 6, 8, 10 ms + Certain controller digital versions have valid values of + 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms + If property is not found, channel will use 15us. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,avg-samples: + description: | + Number of samples to be used for measurement. + Averaging provides the option to obtain a single measurement + from the ADC that is an average of multiple samples. The value + selected is 2^(value). + - For compatible property "qcom,spmi-vadc", valid values + are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 + If property is not found, 1 sample will be used. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - diff-channels + +examples: + - | + /* VADC node */ + pmic_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 0x1>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + io-channel-ranges; + + /* Channel node */ + adc-chan@0x39 { + reg = <0x39>; + qcom,decimation = <512>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,avg-samples = <1>; + qcom,pre-scaling = <1 3>; + }; + }; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project