From: Maulik Shah <mkshah@codeaurora.org>
To: swboyd@chromium.org, evgreen@chromium.org, dianders@chromium.org,
bjorn.andersson@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
agross@kernel.org, mka@chromium.org, rnayak@codeaurora.org,
ilina@codeaurora.org, lsrao@codeaurora.org,
"Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>,
Maulik Shah <mkshah@codeaurora.org>
Subject: [PATCH v14 5/6] soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS
Date: Thu, 26 Mar 2020 23:07:49 +0530 [thread overview]
Message-ID: <1585244270-637-6-git-send-email-mkshah@codeaurora.org> (raw)
In-Reply-To: <1585244270-637-1-git-send-email-mkshah@codeaurora.org>
From: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
TCS can be re-purposed to send active requests. Once the active requests
are sent and response is received, the active mode configuration needs
to be cleared so that controller can use wake TCS for sending wake
requests.
Introduce enable_tcs_irq() to enable completion IRQ for repurposed TCSes.
Fixes: 2de4b8d33eab (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
[mkshah: call enable_tcs_irq() within drv->lock, update commit message]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
drivers/soc/qcom/rpmh-rsc.c | 77 +++++++++++++++++++++++++++++++--------------
1 file changed, 54 insertions(+), 23 deletions(-)
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index ee052cc..8fa70b4 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -207,6 +207,42 @@ static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv,
return NULL;
}
+static void __tcs_trigger(struct rsc_drv *drv, int tcs_id, bool trigger)
+{
+ u32 enable;
+
+ /*
+ * HW req: Clear the DRV_CONTROL and enable TCS again
+ * While clearing ensure that the AMC mode trigger is cleared
+ * and then the mode enable is cleared.
+ */
+ enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, 0);
+ enable &= ~TCS_AMC_MODE_TRIGGER;
+ write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+ enable &= ~TCS_AMC_MODE_ENABLE;
+ write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+
+ if (trigger) {
+ /* Enable the AMC mode on the TCS and then trigger the TCS */
+ enable = TCS_AMC_MODE_ENABLE;
+ write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+ enable |= TCS_AMC_MODE_TRIGGER;
+ write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+ }
+}
+
+static void enable_tcs_irq(struct rsc_drv *drv, int tcs_id, bool enable)
+{
+ u32 data;
+
+ data = read_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, 0);
+ if (enable)
+ data |= BIT(tcs_id);
+ else
+ data &= ~BIT(tcs_id);
+ write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, data);
+}
+
/**
* tcs_tx_done: TX Done interrupt handler
*/
@@ -243,6 +279,14 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
}
trace_rpmh_tx_done(drv, i, req, err);
+
+ /*
+ * If wake tcs was re-purposed for sending active
+ * votes, clear AMC trigger & enable modes and
+ * disable interrupt for this TCS
+ */
+ if (!drv->tcs[ACTIVE_TCS].num_tcs)
+ __tcs_trigger(drv, i, false);
skip:
/* Reclaim the TCS */
write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0);
@@ -250,6 +294,13 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
write_tcs_reg(drv, RSC_DRV_IRQ_CLEAR, 0, BIT(i));
spin_lock(&drv->lock);
clear_bit(i, drv->tcs_in_use);
+ /*
+ * Disable interrupt for WAKE TCS to avoid being
+ * spammed with interrupts coming when the solver
+ * sends its wake votes.
+ */
+ if (!drv->tcs[ACTIVE_TCS].num_tcs)
+ enable_tcs_irq(drv, i, false);
spin_unlock(&drv->lock);
if (req)
rpmh_tx_done(req, err);
@@ -291,28 +342,6 @@ static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, cmd_enable);
}
-static void __tcs_trigger(struct rsc_drv *drv, int tcs_id)
-{
- u32 enable;
-
- /*
- * HW req: Clear the DRV_CONTROL and enable TCS again
- * While clearing ensure that the AMC mode trigger is cleared
- * and then the mode enable is cleared.
- */
- enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, 0);
- enable &= ~TCS_AMC_MODE_TRIGGER;
- write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
- enable &= ~TCS_AMC_MODE_ENABLE;
- write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-
- /* Enable the AMC mode on the TCS and then trigger the TCS */
- enable = TCS_AMC_MODE_ENABLE;
- write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
- enable |= TCS_AMC_MODE_TRIGGER;
- write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-}
-
static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
const struct tcs_request *msg)
{
@@ -383,10 +412,12 @@ static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
tcs->req[tcs_id - tcs->offset] = msg;
set_bit(tcs_id, drv->tcs_in_use);
+ if (msg->state == RPMH_ACTIVE_ONLY_STATE && tcs->type != ACTIVE_TCS)
+ enable_tcs_irq(drv, tcs_id, true);
spin_unlock(&drv->lock);
__tcs_buffer_write(drv, tcs_id, 0, msg);
- __tcs_trigger(drv, tcs_id);
+ __tcs_trigger(drv, tcs_id, true);
done_write:
spin_unlock_irqrestore(&tcs->lock, flags);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2020-03-26 17:38 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-26 17:37 [PATCH v14 0/6] Invoke rpmh_flush for non OSI targets Maulik Shah
2020-03-26 17:37 ` [PATCH v14 1/6] arm64: dts: qcom: sc7180: Add cpuidle low power states Maulik Shah
2020-03-26 17:37 ` [PATCH v14 2/6] soc: qcom: rpmh: Update dirty flag only when data changes Maulik Shah
2020-03-26 17:37 ` [PATCH v14 3/6] soc: qcom: rpmh: Invalidate SLEEP and WAKE TCSes before flushing new data Maulik Shah
2020-03-26 18:31 ` Doug Anderson
2020-03-27 8:23 ` Maulik Shah
2020-03-26 17:37 ` [PATCH v14 4/6] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches Maulik Shah
2020-03-26 21:18 ` Doug Anderson
[not found] ` <7bd2c923-4003-a1c4-610f-548e79a94d35@codeaurora.org>
2020-03-27 18:22 ` Doug Anderson
2020-03-31 8:26 ` Maulik Shah
2020-03-26 17:37 ` Maulik Shah [this message]
2020-03-26 18:20 ` [PATCH v14 5/6] soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS Doug Anderson
2020-03-26 17:37 ` [PATCH v14 6/6] soc: qcom: rpmh-rsc: Allow using free WAKE TCS for active request Maulik Shah
2020-03-26 21:46 ` Doug Anderson
2020-03-27 12:04 ` Maulik Shah
2020-03-27 18:42 ` Doug Anderson
2020-03-31 8:57 ` Maulik Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1585244270-637-6-git-send-email-mkshah@codeaurora.org \
--to=mkshah@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=ilina@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lsrao@codeaurora.org \
--cc=mka@chromium.org \
--cc=rnayak@codeaurora.org \
--cc=rplsssn@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).