linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wesley Cheng <wcheng@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org, kishon@ti.com,
	vkoul@kernel.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Wesley Cheng <wcheng@codeaurora.org>
Subject: [PATCH v2] phy: qcom-snps: Add runtime suspend and resume handlers
Date: Thu, 21 May 2020 18:50:00 -0700	[thread overview]
Message-ID: <1590112200-1110-1-git-send-email-wcheng@codeaurora.org> (raw)

Allow for the PHY to be put into a powered down state when possible.
Add the required suspend and resume callbacks, which will determine
what resources can be turned off depending on the cable status.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>

---
Changes in v2:
 - Addressed checkpatch alignment/line length warnings.
 - Removed superfluous init in qcom_snps_hsphy_resume().

 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 100 ++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 4d74045..0a4e77af 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -76,7 +76,9 @@
  * @iface_clk: phy interface clock
  * @phy_reset: phy reset control
  * @vregs: regulator supplies bulk data
+ * @suspended: PHY is in the suspended state
  * @phy_initialized: if PHY has been initialized correctly
+ * @mode: contains the current mode the PHY is in
  */
 struct qcom_snps_hsphy {
 	struct phy *phy;
@@ -87,7 +89,9 @@ struct qcom_snps_hsphy {
 	struct reset_control *phy_reset;
 	struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS];
 
+	bool suspended;
 	bool phy_initialized;
+	enum phy_mode mode;
 };
 
 static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
@@ -104,6 +108,84 @@ static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
 	readl_relaxed(base + offset);
 }
 
+static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
+{
+	if (hsphy->suspended)
+		return 0;
+
+	dev_dbg(&hsphy->phy->dev, "Suspend QCOM SNPS PHY, mode:%d\n",
+		hsphy->mode);
+
+	if (hsphy->mode == PHY_MODE_USB_HOST) {
+		/* Enable auto-resume to meet remote wakeup timing */
+		qcom_snps_hsphy_write_mask(hsphy->base,
+						USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+						USB2_AUTO_RESUME,
+						USB2_AUTO_RESUME);
+		usleep_range(500, 1000);
+		qcom_snps_hsphy_write_mask(hsphy->base,
+						USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+						0, USB2_AUTO_RESUME);
+	}
+
+	clk_disable_unprepare(hsphy->cfg_ahb_clk);
+	hsphy->suspended = true;
+
+	return 0;
+}
+
+static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
+{
+	int ret;
+
+	if (!hsphy->suspended)
+		return 0;
+
+	dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode:%d\n",
+		hsphy->mode);
+
+	ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
+	if (ret) {
+		dev_err(&hsphy->phy->dev,
+			"failed to enable cfg ahb clock, %d\n", ret);
+		return ret;
+	}
+
+	hsphy->suspended = false;
+	return 0;
+}
+
+static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device *dev)
+{
+	struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
+
+	if (!hsphy->phy_initialized)
+		return 0;
+
+	qcom_snps_hsphy_suspend(hsphy);
+	return 0;
+}
+
+static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev)
+{
+	struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
+
+	if (!hsphy->phy_initialized)
+		return 0;
+
+	qcom_snps_hsphy_resume(hsphy);
+	return 0;
+}
+
+static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
+					int submode)
+{
+	struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
+
+	hsphy->mode = mode;
+	return 0;
+}
+
 static int qcom_snps_hsphy_init(struct phy *phy)
 {
 	struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
@@ -175,6 +257,7 @@ static int qcom_snps_hsphy_init(struct phy *phy)
 					UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0);
 
 	hsphy->phy_initialized = true;
+	hsphy->suspended = false;
 
 	return 0;
 
@@ -201,6 +284,7 @@ static int qcom_snps_hsphy_exit(struct phy *phy)
 static const struct phy_ops qcom_snps_hsphy_gen_ops = {
 	.init		= qcom_snps_hsphy_init,
 	.exit		= qcom_snps_hsphy_exit,
+	.set_mode	= qcom_snps_hsphy_set_mode,
 	.owner		= THIS_MODULE,
 };
 
@@ -212,6 +296,11 @@ static int qcom_snps_hsphy_exit(struct phy *phy)
 };
 MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
 
+static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
+	SET_RUNTIME_PM_OPS(qcom_snps_hsphy_runtime_suspend,
+			   qcom_snps_hsphy_runtime_resume, NULL)
+};
+
 static int qcom_snps_hsphy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -255,6 +344,14 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	/*
+	 * Prevent runtime pm from being ON by default. Users can enable
+	 * it using power/control in sysfs.
+	 */
+	pm_runtime_forbid(dev);
+
 	generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
 	if (IS_ERR(generic_phy)) {
 		ret = PTR_ERR(generic_phy);
@@ -269,6 +366,8 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (!IS_ERR(phy_provider))
 		dev_dbg(dev, "Registered Qcom-SNPS HS phy\n");
+	else
+		pm_runtime_disable(dev);
 
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
@@ -277,6 +376,7 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
 	.probe		= qcom_snps_hsphy_probe,
 	.driver = {
 		.name	= "qcom-snps-hs-femto-v2-phy",
+		.pm = &qcom_snps_hsphy_pm_ops,
 		.of_match_table = qcom_snps_hsphy_of_match_table,
 	},
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


             reply	other threads:[~2020-05-22  1:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-22  1:50 Wesley Cheng [this message]
2020-06-24 12:21 ` [PATCH v2] phy: qcom-snps: Add runtime suspend and resume handlers Vinod Koul
2020-06-25 19:22   ` Wesley Cheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1590112200-1110-1-git-send-email-wcheng@codeaurora.org \
    --to=wcheng@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).