linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: ulf.hansson@linaro.org, robh+dt@kernel.org, bjorn.andersson@linaro.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH 3/3] arm64: dts: sc7180: Add assigned-performance-states for i2c
Date: Tue,  4 Aug 2020 17:16:56 +0530	[thread overview]
Message-ID: <1596541616-27688-4-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1596541616-27688-1-git-send-email-rnayak@codeaurora.org>

qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 Mhz)
Though qup-i2c does not support DVFS, it still needs to vote for a
performance state on 'cx' to satisfy the 19.2 Mhz clock frequency
requirement.

Use 'assigned-performance-states' to pass this information from
device tree, and also add the power-domains property to specify
the cx power-domain.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index d46b383..f96ca21 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -767,6 +767,8 @@
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -819,6 +821,8 @@
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -871,6 +875,8 @@
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -905,6 +911,8 @@
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -957,6 +965,8 @@
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -991,6 +1001,8 @@
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1058,6 +1070,8 @@
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1110,6 +1124,8 @@
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1144,6 +1160,8 @@
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1196,6 +1214,8 @@
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1230,6 +1250,8 @@
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1282,6 +1304,8 @@
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply	other threads:[~2020-08-04 12:23 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-04 11:46 [PATCH 0/3] Add support for assigned-performance-states Rajendra Nayak
2020-08-04 11:46 ` [PATCH 1/3] dt-bindings: power: Introduce 'assigned-performance-states' property Rajendra Nayak
2020-08-05  6:39   ` Stephen Boyd
2020-08-05  8:13     ` Rajendra Nayak
2020-08-05 23:57       ` Stephen Boyd
2020-08-04 11:46 ` [PATCH 2/3] PM / Domains: Add support for 'assigned-performance-states' Rajendra Nayak
2020-08-12  9:37   ` Ulf Hansson
2020-08-04 11:46 ` Rajendra Nayak [this message]
2020-08-05  6:41   ` [PATCH 3/3] arm64: dts: sc7180: Add assigned-performance-states for i2c Stephen Boyd
2020-08-05  8:14     ` Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1596541616-27688-4-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).