linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rohit kumar <rohitkr@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
	plai@codeaurora.org, bgoswami@codeaurora.org, perex@perex.cz,
	tiwai@suse.com, srinivas.kandagatla@linaro.org,
	linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Rohit kumar <rohitkr@codeaurora.org>
Subject: [PATCH v6 02/12] ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function
Date: Fri, 14 Aug 2020 16:22:58 +0530	[thread overview]
Message-ID: <1597402388-14112-3-git-send-email-rohitkr@codeaurora.org> (raw)
In-Reply-To: <1597402388-14112-1-git-send-email-rohitkr@codeaurora.org>

Ahbix clock is optional clock and not needed for all platforms.
Move it to lpass-apq8016/ipq806x as it is not needed for sc7180.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/lpass-apq8016.c | 27 ++++++++++++++++++++++++++
 sound/soc/qcom/lpass-cpu.c     | 40 ++++++++++-----------------------------
 sound/soc/qcom/lpass-ipq806x.c | 43 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 80 insertions(+), 30 deletions(-)

diff --git a/sound/soc/qcom/lpass-apq8016.c b/sound/soc/qcom/lpass-apq8016.c
index 8210e37..fe4c258 100644
--- a/sound/soc/qcom/lpass-apq8016.c
+++ b/sound/soc/qcom/lpass-apq8016.c
@@ -185,7 +185,33 @@ static int apq8016_lpass_init(struct platform_device *pdev)
 		return ret;
 	}
 
+	drvdata->ahbix_clk = devm_clk_get(dev, "ahbix-clk");
+	if (IS_ERR(drvdata->ahbix_clk)) {
+		dev_err(dev, "error getting ahbix-clk: %ld\n",
+				PTR_ERR(drvdata->ahbix_clk));
+		ret = PTR_ERR(drvdata->ahbix_clk);
+		goto err_ahbix_clk;
+	}
+
+	ret = clk_set_rate(drvdata->ahbix_clk, LPASS_AHBIX_CLOCK_FREQUENCY);
+	if (ret) {
+		dev_err(dev, "error setting rate on ahbix_clk: %d\n", ret);
+		goto err_ahbix_clk;
+	}
+	dev_dbg(dev, "set ahbix_clk rate to %lu\n",
+			clk_get_rate(drvdata->ahbix_clk));
+
+	ret = clk_prepare_enable(drvdata->ahbix_clk);
+	if (ret) {
+		dev_err(dev, "error enabling ahbix_clk: %d\n", ret);
+		goto err_ahbix_clk;
+	}
+
 	return 0;
+
+err_ahbix_clk:
+	clk_bulk_disable_unprepare(drvdata->num_clks, drvdata->clks);
+	return ret;
 }
 
 static int apq8016_lpass_exit(struct platform_device *pdev)
@@ -193,6 +219,7 @@ static int apq8016_lpass_exit(struct platform_device *pdev)
 	struct lpass_data *drvdata = platform_get_drvdata(pdev);
 
 	clk_bulk_disable_unprepare(drvdata->num_clks, drvdata->clks);
+	clk_disable_unprepare(drvdata->ahbix_clk);
 
 	return 0;
 }
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index e00a4af..f0c7e93 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -566,8 +566,13 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
 		return PTR_ERR(drvdata->lpaif_map);
 	}
 
-	if (variant->init)
-		variant->init(pdev);
+	if (variant->init) {
+		ret = variant->init(pdev);
+		if (ret) {
+			dev_err(dev, "error initializing variant: %d\n", ret);
+			return ret;
+		}
+	}
 
 	for (i = 0; i < variant->num_dai; i++) {
 		dai_id = variant->dai_driver[i].id;
@@ -594,46 +599,22 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
 		}
 	}
 
-	drvdata->ahbix_clk = devm_clk_get(dev, "ahbix-clk");
-	if (IS_ERR(drvdata->ahbix_clk)) {
-		dev_err(dev, "error getting ahbix-clk: %ld\n",
-			PTR_ERR(drvdata->ahbix_clk));
-		return PTR_ERR(drvdata->ahbix_clk);
-	}
-
-	ret = clk_set_rate(drvdata->ahbix_clk, LPASS_AHBIX_CLOCK_FREQUENCY);
-	if (ret) {
-		dev_err(dev, "error setting rate on ahbix_clk: %d\n", ret);
-		return ret;
-	}
-	dev_dbg(dev, "set ahbix_clk rate to %lu\n",
-		clk_get_rate(drvdata->ahbix_clk));
-
-	ret = clk_prepare_enable(drvdata->ahbix_clk);
-	if (ret) {
-		dev_err(dev, "error enabling ahbix_clk: %d\n", ret);
-		return ret;
-	}
-
 	ret = devm_snd_soc_register_component(dev,
 					      &lpass_cpu_comp_driver,
 					      variant->dai_driver,
 					      variant->num_dai);
 	if (ret) {
 		dev_err(dev, "error registering cpu driver: %d\n", ret);
-		goto err_clk;
+		goto err;
 	}
 
 	ret = asoc_qcom_lpass_platform_register(pdev);
 	if (ret) {
 		dev_err(dev, "error registering platform driver: %d\n", ret);
-		goto err_clk;
+		goto err;
 	}
 
-	return 0;
-
-err_clk:
-	clk_disable_unprepare(drvdata->ahbix_clk);
+err:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_platform_probe);
@@ -645,7 +626,6 @@ int asoc_qcom_lpass_cpu_platform_remove(struct platform_device *pdev)
 	if (drvdata->variant->exit)
 		drvdata->variant->exit(pdev);
 
-	clk_disable_unprepare(drvdata->ahbix_clk);
 
 	return 0;
 }
diff --git a/sound/soc/qcom/lpass-ipq806x.c b/sound/soc/qcom/lpass-ipq806x.c
index 1987605..b7c0586 100644
--- a/sound/soc/qcom/lpass-ipq806x.c
+++ b/sound/soc/qcom/lpass-ipq806x.c
@@ -55,6 +55,47 @@ static struct snd_soc_dai_driver ipq806x_lpass_cpu_dai_driver = {
 	.ops    = &asoc_qcom_lpass_cpu_dai_ops,
 };
 
+static int ipq806x_lpass_init(struct platform_device *pdev)
+{
+	struct lpass_data *drvdata = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	drvdata->ahbix_clk = devm_clk_get(dev, "ahbix-clk");
+	if (IS_ERR(drvdata->ahbix_clk)) {
+		dev_err(dev, "error getting ahbix-clk: %ld\n",
+				PTR_ERR(drvdata->ahbix_clk));
+		ret = PTR_ERR(drvdata->ahbix_clk);
+		goto err_ahbix_clk;
+	}
+
+	ret = clk_set_rate(drvdata->ahbix_clk, LPASS_AHBIX_CLOCK_FREQUENCY);
+	if (ret) {
+		dev_err(dev, "error setting rate on ahbix_clk: %d\n", ret);
+		goto err_ahbix_clk;
+	}
+	dev_dbg(dev, "set ahbix_clk rate to %lu\n",
+			clk_get_rate(drvdata->ahbix_clk));
+
+	ret = clk_prepare_enable(drvdata->ahbix_clk);
+	if (ret) {
+		dev_err(dev, "error enabling ahbix_clk: %d\n", ret);
+		goto err_ahbix_clk;
+	}
+
+err_ahbix_clk:
+	return ret;
+}
+
+static int ipq806x_lpass_exit(struct platform_device *pdev)
+{
+	struct lpass_data *drvdata = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(drvdata->ahbix_clk);
+
+	return 0;
+}
+
 static int ipq806x_lpass_alloc_dma_channel(struct lpass_data *drvdata, int dir)
 {
 	if (dir == SNDRV_PCM_STREAM_PLAYBACK)
@@ -90,6 +131,8 @@ static struct lpass_variant ipq806x_data = {
 	.dai_bit_clk_names	= (const char *[]) {
 				"mi2s-bit-clk",
 				},
+	.init			= ipq806x_lpass_init,
+	.exit			= ipq806x_lpass_exit,
 	.alloc_dma_channel	= ipq806x_lpass_alloc_dma_channel,
 	.free_dma_channel	= ipq806x_lpass_free_dma_channel,
 };
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


  parent reply	other threads:[~2020-08-14 10:55 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-14 10:52 [PATCH v6 00/12] ASoC: qcom: Add support for SC7180 lpass variant Rohit kumar
2020-08-14 10:52 ` [PATCH v6 01/12] ASoC: qcom: Add common array to initialize soc based core clocks Rohit kumar
2020-08-14 10:52 ` Rohit kumar [this message]
2020-08-14 10:52 ` [PATCH v6 03/12] ASoC: qcom: lpass-platform: Replace card->dev with component->dev Rohit kumar
2020-08-14 10:53 ` [PATCH v6 04/12] ASoC: qcom: lpass-platform: fix memory leak Rohit kumar
2020-08-14 10:53 ` [PATCH v6 05/12] ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers Rohit kumar
2020-08-14 10:53 ` [PATCH v6 06/12] ASoC: qcom: lpass-cpu: fix concurrency issue Rohit kumar
2020-08-14 10:53 ` [PATCH v6 07/12] dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node Rohit kumar
2020-08-17 20:35   ` Rob Herring
2020-08-14 10:53 ` [PATCH v6 08/12] include: dt-bindings: sound: Add sc7180-lpass bindings header Rohit kumar
2020-08-14 10:53 ` [PATCH v6 09/12] ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio Rohit kumar
2020-08-14 10:53 ` [PATCH v6 10/12] ASoC: qcom: lpass-cpu: Use platform_get_resource Rohit kumar
2020-08-14 10:53 ` [PATCH v6 11/12] ASoC: qcom: lpass-platform: Use platform_get_irq Rohit kumar
2020-08-14 10:53 ` [PATCH v6 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format Rohit kumar
2020-08-17 20:45   ` Rob Herring
2020-08-18 16:53 ` [PATCH v6 00/12] ASoC: qcom: Add support for SC7180 lpass variant Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1597402388-14112-3-git-send-email-rohitkr@codeaurora.org \
    --to=rohitkr@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bgoswami@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=plai@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).