[PATCH v3] drm/msm/dp: fixes wrong connection state caused by failure of link train

[PATCH v3] drm/msm/dp: fixes wrong connection state caused by failure of link train

[Kuogee Hsieh]

Connection state is not set correctly happen when either failure of link
train due to cable unplugged in the middle of aux channel reading or
cable plugged in while in suspended state. This patch fixes these problems.
This patch also replace ST_SUSPEND_PENDING with ST_DISPLAY_OFF.

Changes in V2:
-- Add more information to commit message.

Changes in V3:
-- change base

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 40 ++++++++++++++---------------
 drivers/gpu/drm/msm/dp/dp_panel.c   |  5 ++++
 2 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index d9164ff6515d..c0665a0a4c78 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -45,7 +45,7 @@ enum {
 	ST_CONNECT_PENDING,
 	ST_CONNECTED,
 	ST_DISCONNECT_PENDING,
-	ST_SUSPEND_PENDING,
+	ST_DISPLAY_OFF,
 	ST_SUSPENDED,
 };
 
@@ -503,7 +503,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
 	mutex_lock(&dp->event_mutex);
 
 	state =  dp->hpd_state;
-	if (state == ST_SUSPEND_PENDING) {
+	if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) {
 		mutex_unlock(&dp->event_mutex);
 		return 0;
 	}
@@ -525,14 +525,14 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
 	hpd->hpd_high = 1;
 
 	ret = dp_display_usbpd_configure_cb(&dp->pdev->dev);
-	if (ret) {	/* failed */
+	if (ret) {	/* link train failed */
 		hpd->hpd_high = 0;
 		dp->hpd_state = ST_DISCONNECTED;
+	} else {
+		/* start sentinel checking in case of missing uevent */
+		dp_add_event(dp, EV_CONNECT_PENDING_TIMEOUT, 0, tout);
 	}
 
-	/* start sanity checking */
-	dp_add_event(dp, EV_CONNECT_PENDING_TIMEOUT, 0, tout);
-
 	mutex_unlock(&dp->event_mutex);
 
 	/* uevent will complete connection part */
@@ -577,11 +577,6 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 	mutex_lock(&dp->event_mutex);
 
 	state = dp->hpd_state;
-	if (state == ST_SUSPEND_PENDING) {
-		mutex_unlock(&dp->event_mutex);
-		return 0;
-	}
-
 	if (state == ST_DISCONNECT_PENDING || state == ST_DISCONNECTED) {
 		mutex_unlock(&dp->event_mutex);
 		return 0;
@@ -608,7 +603,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 	 */
 	dp_display_usbpd_disconnect_cb(&dp->pdev->dev);
 
-	/* start sanity checking */
+	/* start sentinel checking in case of missing uevent */
 	dp_add_event(dp, EV_DISCONNECT_PENDING_TIMEOUT, 0, DP_TIMEOUT_5_SECOND);
 
 	/* signal the disconnect event early to ensure proper teardown */
@@ -648,7 +643,7 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
 
 	/* irq_hpd can happen at either connected or disconnected state */
 	state =  dp->hpd_state;
-	if (state == ST_SUSPEND_PENDING) {
+	if (state == ST_DISPLAY_OFF) {
 		mutex_unlock(&dp->event_mutex);
 		return 0;
 	}
@@ -1073,7 +1068,7 @@ static irqreturn_t dp_display_irq_handler(int irq, void *dev_id)
 		}
 
 		if (hpd_isr_status & DP_DP_IRQ_HPD_INT_MASK) {
-			/* delete connect pending event first */
+			/* stop sentinel connect pending checking */
 			dp_del_event(dp, EV_CONNECT_PENDING_TIMEOUT);
 			dp_add_event(dp, EV_IRQ_HPD_INT, 0, 0);
 		}
@@ -1204,13 +1199,10 @@ static int dp_pm_resume(struct device *dev)
 
 	status = dp_catalog_hpd_get_state_status(dp->catalog);
 
-	if (status) {
+	if (status)
 		dp->dp_display.is_connected = true;
-	} else {
+	else
 		dp->dp_display.is_connected = false;
-		/* make sure next resume host_init be called */
-		dp->core_initialized = false;
-	}
 
 	mutex_unlock(&dp->event_mutex);
 
@@ -1232,6 +1224,9 @@ static int dp_pm_suspend(struct device *dev)
 
 	dp->hpd_state = ST_SUSPENDED;
 
+	/* host_init will be called at pm_resume */
+	dp->core_initialized = false;
+
 	mutex_unlock(&dp->event_mutex);
 
 	return 0;
@@ -1361,6 +1356,7 @@ int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
 
 	mutex_lock(&dp_display->event_mutex);
 
+	/* stop sentinel checking */
 	dp_del_event(dp_display, EV_CONNECT_PENDING_TIMEOUT);
 
 	rc = dp_display_set_mode(dp, &dp_display->dp_mode);
@@ -1391,7 +1387,8 @@ int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
 		dp_display_unprepare(dp);
 	}
 
-	if (state == ST_SUSPEND_PENDING)
+	/* manual kick off plug event to train link */
+	if (state == ST_DISPLAY_OFF)
 		dp_add_event(dp_display, EV_IRQ_HPD_INT, 0, 0);
 
 	/* completed connection */
@@ -1423,6 +1420,7 @@ int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
 
 	mutex_lock(&dp_display->event_mutex);
 
+	/* stop sentinel checking */
 	dp_del_event(dp_display, EV_DISCONNECT_PENDING_TIMEOUT);
 
 	dp_display_disable(dp_display, 0);
@@ -1436,7 +1434,7 @@ int msm_dp_display_disable(struct msm_dp *dp, struct drm_encoder *encoder)
 		/* completed disconnection */
 		dp_display->hpd_state = ST_DISCONNECTED;
 	} else {
-		dp_display->hpd_state = ST_SUSPEND_PENDING;
+		dp_display->hpd_state = ST_DISPLAY_OFF;
 	}
 
 	mutex_unlock(&dp_display->event_mutex);
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
index 18cec4fc5e0b..1b7a20dc2d8e 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.c
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -196,6 +196,11 @@ int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
 					      &panel->aux->ddc);
 	if (!dp_panel->edid) {
 		DRM_ERROR("panel edid read failed\n");
+		/* check edid read fail is due to unplug */
+		if (!dp_catalog_hpd_get_state_status(panel->catalog)) {
+			rc = -ETIMEDOUT;
+			goto end;
+		}
 
 		/* fail safe edid */
 		mutex_lock(&connector->dev->mode_config.mutex);

base-commit: aa2d34d0676cd6ee3327023405e5afdc5cc0b91d
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v3] drm/msm/dp: fixes wrong connection state caused by failure of link train

[Stephen Boyd]

Quoting Kuogee Hsieh (2020-10-13 16:35:44)
> Connection state is not set correctly happen when either failure of link
> train due to cable unplugged in the middle of aux channel reading or
> cable plugged in while in suspended state. This patch fixes these problems.
> This patch also replace ST_SUSPEND_PENDING with ST_DISPLAY_OFF.
> 
> Changes in V2:
> -- Add more information to commit message.
> 
> Changes in V3:
> -- change base
> 
> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> ---

Any Fixes tag?

Tested-by: Stephen Boyd <swboyd@chromium.org>