Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/2] arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite
@ 2020-10-15 17:45 Sibi Sankar
  2020-10-15 17:45 ` [PATCH 2/2] arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant Sibi Sankar
  2020-10-16 22:59 ` [PATCH 1/2] arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite Doug Anderson
  0 siblings, 2 replies; 3+ messages in thread
From: Sibi Sankar @ 2020-10-15 17:45 UTC (permalink / raw)
  To: bjorn.andersson, mka
  Cc: agross, linux-arm-msm, devicetree, linux-kernel, evgreen,
	dianders, robh+dt, swboyd, Sibi Sankar

Tweak the DDR/L3 bandwidth votes on the lite variant of the SC7180 SoC
since the gold cores only support frequencies upto 2.1 GHz.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180-lite.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-lite.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
new file mode 100644
index 000000000000..cff50275cfe1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 lite device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+&cpu6_opp11 {
+	opp-peak-kBps = <8532000 22425600>;
+};
+
+&cpu6_opp12 {
+	opp-peak-kBps = <8532000 23347200>;
+};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH 2/2] arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant
  2020-10-15 17:45 [PATCH 1/2] arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite Sibi Sankar
@ 2020-10-15 17:45 ` Sibi Sankar
  2020-10-16 22:59 ` [PATCH 1/2] arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite Doug Anderson
  1 sibling, 0 replies; 3+ messages in thread
From: Sibi Sankar @ 2020-10-15 17:45 UTC (permalink / raw)
  To: bjorn.andersson, mka
  Cc: agross, linux-arm-msm, devicetree, linux-kernel, evgreen,
	dianders, robh+dt, swboyd, Sibi Sankar

Add DDR/L3 bandwidth votes for the pro variant of SC7180 SoC, as it support
frequencies upto 2.5 GHz.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6678f1e8e395..4a39c35119ce 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -525,6 +525,11 @@
 			opp-hz = /bits/ 64 <2400000000>;
 			opp-peak-kBps = <8532000 23347200>;
 		};
+
+		cpu6_opp16: opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <8532000 23347200>;
+		};
 	};
 
 	memory@80000000 {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH 1/2] arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite
  2020-10-15 17:45 [PATCH 1/2] arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite Sibi Sankar
  2020-10-15 17:45 ` [PATCH 2/2] arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant Sibi Sankar
@ 2020-10-16 22:59 ` Doug Anderson
  1 sibling, 0 replies; 3+ messages in thread
From: Doug Anderson @ 2020-10-16 22:59 UTC (permalink / raw)
  To: Sibi Sankar
  Cc: Bjorn Andersson, Matthias Kaehlcke, Andy Gross, linux-arm-msm,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML,
	Evan Green, Rob Herring, Stephen Boyd

Hi,

On Thu, Oct 15, 2020 at 10:53 AM Sibi Sankar <sibis@codeaurora.org> wrote:
>
> Tweak the DDR/L3 bandwidth votes on the lite variant of the SC7180 SoC
> since the gold cores only support frequencies upto 2.1 GHz.
>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180-lite.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
> new file mode 100644
> index 000000000000..cff50275cfe1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * SC7180 lite device tree source
> + *
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +&cpu6_opp11 {
> +       opp-peak-kBps = <8532000 22425600>;
> +};
> +
> +&cpu6_opp12 {
> +       opp-peak-kBps = <8532000 23347200>;
> +};

I guess this is OK, but something about it smells just a little
strange...  I guess:

a) There's suddenly a big jump from opp10 to opp11.  You don't use
7216000 at all anymore.

b) The fact that we need to do this at all feels like a sign that
somehow this wasn't designed quite right.

Just brainstorming a bit: If the higher memory rate wasn't useful for
OPP11/12 on the non-lite version of the chip, why are they useful for
that OPP on the lite version?  I guess you're just trying to eek out
the last little bits of performance once the cpufreq is maxed out?  It
almost feels like a better way to do this (though it wouldn't be
monotonically increasing anymore so it wouldn't actually work) would
be to have a few "OPP" points at the top where the cpufreq stops
increasing and all you do is increase the memory frequency.

c) In theory we're supposed to be able to probe whether we're on the
normal, lite, or pro version, right?  Anyway we could tweak this in
code so we don't have to know to include the right dtsi file?


-Doug

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-15 17:45 [PATCH 1/2] arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite Sibi Sankar
2020-10-15 17:45 ` [PATCH 2/2] arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant Sibi Sankar
2020-10-16 22:59 ` [PATCH 1/2] arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite Doug Anderson

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git