linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bhaumik Bhatt <bbhatt@codeaurora.org>
To: manivannan.sadhasivam@linaro.org
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
	jhugo@codeaurora.org, linux-kernel@vger.kernel.org,
	Bhaumik Bhatt <bbhatt@codeaurora.org>
Subject: [PATCH v3 11/12] bus: mhi: core: Mark and maintain device states early on after power down
Date: Thu, 29 Oct 2020 21:10:56 -0700	[thread overview]
Message-ID: <1604031057-32820-12-git-send-email-bbhatt@codeaurora.org> (raw)
In-Reply-To: <1604031057-32820-1-git-send-email-bbhatt@codeaurora.org>

mhi_power_down() does not ensure that the PM state is moved to an
inaccessible state soon enough as the system can encounter
scheduling delays till mhi_pm_disable_transition() gets called.
Additionally, if an MHI controller decides that the device is now
inaccessible and issues a power down, the register inaccessible
state is not maintained by moving from MHI_PM_LD_ERR_FATAL_DETECT
to MHI_PM_SHUTDOWN_PROCESS. This can result in bus errors if a
client driver attempted to read registers when powering down.
Close these gaps and avoid any race conditions to prevent such
activity.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/pm.c | 77 ++++++++++++++++++++---------------------------
 1 file changed, 33 insertions(+), 44 deletions(-)

diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 347ae7d..ffbf6f5 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -37,9 +37,10 @@
  *     M0 -> FW_DL_ERR
  *     M0 -> M3_ENTER -> M3 -> M3_EXIT --> M0
  * L1: SYS_ERR_DETECT -> SYS_ERR_PROCESS --> POR
- * L2: SHUTDOWN_PROCESS -> DISABLE
+ * L2: SHUTDOWN_PROCESS -> LD_ERR_FATAL_DETECT
+ *     SHUTDOWN_PROCESS -> DISABLE
  * L3: LD_ERR_FATAL_DETECT <--> LD_ERR_FATAL_DETECT
- *     LD_ERR_FATAL_DETECT -> SHUTDOWN_PROCESS
+ *     LD_ERR_FATAL_DETECT -> DISABLE
  */
 static struct mhi_pm_transitions const dev_state_transitions[] = {
 	/* L0 States */
@@ -72,7 +73,7 @@ static struct mhi_pm_transitions const dev_state_transitions[] = {
 	{
 		MHI_PM_M3,
 		MHI_PM_M3_EXIT | MHI_PM_SYS_ERR_DETECT |
-		MHI_PM_SHUTDOWN_PROCESS | MHI_PM_LD_ERR_FATAL_DETECT
+		MHI_PM_LD_ERR_FATAL_DETECT
 	},
 	{
 		MHI_PM_M3_EXIT,
@@ -103,7 +104,7 @@ static struct mhi_pm_transitions const dev_state_transitions[] = {
 	/* L3 States */
 	{
 		MHI_PM_LD_ERR_FATAL_DETECT,
-		MHI_PM_LD_ERR_FATAL_DETECT | MHI_PM_SHUTDOWN_PROCESS
+		MHI_PM_LD_ERR_FATAL_DETECT | MHI_PM_DISABLE
 	},
 };
 
@@ -445,10 +446,9 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
 }
 
 /* Handle shutdown transitions */
-static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,
-				      enum mhi_pm_state transition_state)
+static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl)
 {
-	enum mhi_pm_state cur_state, prev_state;
+	enum mhi_pm_state cur_state;
 	struct mhi_event *mhi_event;
 	struct mhi_cmd_ctxt *cmd_ctxt;
 	struct mhi_cmd *mhi_cmd;
@@ -456,33 +456,13 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	int ret, i;
 
-	dev_dbg(dev, "Transitioning from PM state: %s to: %s\n",
-		to_mhi_pm_state_str(mhi_cntrl->pm_state),
-		to_mhi_pm_state_str(transition_state));
+	dev_dbg(dev, "Processing disable transition with PM state: %s\n",
+		to_mhi_pm_state_str(mhi_cntrl->pm_state));
 
 	mutex_lock(&mhi_cntrl->pm_mutex);
-	write_lock_irq(&mhi_cntrl->pm_lock);
-	prev_state = mhi_cntrl->pm_state;
-	cur_state = mhi_tryset_pm_state(mhi_cntrl, transition_state);
-	if (cur_state == transition_state) {
-		mhi_cntrl->ee = MHI_EE_DISABLE_TRANSITION;
-		mhi_cntrl->dev_state = MHI_STATE_RESET;
-	}
-	write_unlock_irq(&mhi_cntrl->pm_lock);
-
-	/* Wake up threads waiting for state transition */
-	wake_up_all(&mhi_cntrl->state_event);
-
-	if (cur_state != transition_state) {
-		dev_err(dev, "Failed to transition to state: %s from: %s\n",
-			to_mhi_pm_state_str(transition_state),
-			to_mhi_pm_state_str(cur_state));
-		mutex_unlock(&mhi_cntrl->pm_mutex);
-		return;
-	}
 
 	/* Trigger MHI RESET so that the device will not access host memory */
-	if (MHI_REG_ACCESS_VALID(prev_state)) {
+	if (!MHI_PM_IN_FATAL_STATE(mhi_cntrl->pm_state)) {
 		u32 in_reset = -1;
 		unsigned long timeout = msecs_to_jiffies(mhi_cntrl->timeout_ms);
 
@@ -785,8 +765,7 @@ void mhi_pm_st_worker(struct work_struct *work)
 			mhi_pm_sys_error_transition(mhi_cntrl);
 			break;
 		case DEV_ST_TRANSITION_DISABLE:
-			mhi_pm_disable_transition
-				(mhi_cntrl, MHI_PM_SHUTDOWN_PROCESS);
+			mhi_pm_disable_transition(mhi_cntrl);
 			break;
 		default:
 			break;
@@ -1153,23 +1132,33 @@ EXPORT_SYMBOL_GPL(mhi_async_power_up);
 
 void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
 {
-	enum mhi_pm_state cur_state;
+	enum mhi_pm_state cur_state, transition_state;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 
 	/* If it's not a graceful shutdown, force MHI to linkdown state */
-	if (!graceful) {
-		mutex_lock(&mhi_cntrl->pm_mutex);
-		write_lock_irq(&mhi_cntrl->pm_lock);
-		cur_state = mhi_tryset_pm_state(mhi_cntrl,
-						MHI_PM_LD_ERR_FATAL_DETECT);
-		write_unlock_irq(&mhi_cntrl->pm_lock);
-		mutex_unlock(&mhi_cntrl->pm_mutex);
-		if (cur_state != MHI_PM_LD_ERR_FATAL_DETECT)
-			dev_dbg(dev, "Failed to move to state: %s from: %s\n",
-				to_mhi_pm_state_str(MHI_PM_LD_ERR_FATAL_DETECT),
-				to_mhi_pm_state_str(mhi_cntrl->pm_state));
+	transition_state = (graceful) ? MHI_PM_SHUTDOWN_PROCESS :
+			   MHI_PM_LD_ERR_FATAL_DETECT;
+
+	mutex_lock(&mhi_cntrl->pm_mutex);
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	cur_state = mhi_tryset_pm_state(mhi_cntrl, transition_state);
+	if (cur_state != transition_state) {
+		dev_err(dev, "Failed to move to state: %s from: %s\n",
+			to_mhi_pm_state_str(transition_state),
+			to_mhi_pm_state_str(mhi_cntrl->pm_state));
+		/* Force link down or error fatal detected state */
+		mhi_cntrl->pm_state = MHI_PM_LD_ERR_FATAL_DETECT;
 	}
 
+	/* mark device inactive to avoid any further host processing */
+	mhi_cntrl->ee = MHI_EE_DISABLE_TRANSITION;
+	mhi_cntrl->dev_state = MHI_STATE_RESET;
+
+	wake_up_all(&mhi_cntrl->state_event);
+
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+	mutex_unlock(&mhi_cntrl->pm_mutex);
+
 	mhi_queue_state_transition(mhi_cntrl, DEV_ST_TRANSITION_DISABLE);
 
 	/* Wait for shutdown to complete */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2020-10-30  4:11 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-30  4:10 [PATCH v3 00/12] Bug fixes and improvements for MHI power operations Bhaumik Bhatt
2020-10-30  4:10 ` [PATCH v3 01/12] bus: mhi: core: Use appropriate names for firmware load functions Bhaumik Bhatt
2020-10-30 13:29   ` Manivannan Sadhasivam
2020-10-30  4:10 ` [PATCH v3 02/12] bus: mhi: core: Move to using high priority workqueue Bhaumik Bhatt
2020-10-30 13:35   ` Manivannan Sadhasivam
2020-10-30  4:10 ` [PATCH v3 03/12] bus: mhi: core: Skip device wake in error or shutdown states Bhaumik Bhatt
2020-10-30  4:10 ` [PATCH v3 04/12] bus: mhi: core: Move to SYS_ERROR regardless of RDDM capability Bhaumik Bhatt
2020-10-30 13:52   ` Manivannan Sadhasivam
2020-10-30 19:29     ` Bhaumik Bhatt
2020-10-30  4:10 ` [PATCH v3 05/12] bus: mhi: core: Prevent sending multiple RDDM entry callbacks Bhaumik Bhatt
2020-10-30 13:56   ` Manivannan Sadhasivam
2020-10-30  4:10 ` [PATCH v3 06/12] bus: mhi: core: Move to an error state on any firmware load failure Bhaumik Bhatt
2020-10-30 14:00   ` Manivannan Sadhasivam
2020-10-30  4:10 ` [PATCH v3 07/12] bus: mhi: core: Use appropriate label in firmware load handler API Bhaumik Bhatt
2020-10-30 14:00   ` Manivannan Sadhasivam
2020-10-30  4:10 ` [PATCH v3 08/12] bus: mhi: core: Move to an error state on mission mode failure Bhaumik Bhatt
2020-10-30  4:10 ` [PATCH v3 09/12] bus: mhi: core: Check for IRQ availability during registration Bhaumik Bhatt
2020-10-30 14:02   ` Manivannan Sadhasivam
2020-10-30  4:10 ` [PATCH v3 10/12] bus: mhi: core: Separate system error and power down handling Bhaumik Bhatt
2020-10-30 14:06   ` Manivannan Sadhasivam
2020-10-30 19:34     ` Bhaumik Bhatt
2020-10-31  6:54       ` Manivannan Sadhasivam
2020-11-02 16:52         ` Bhaumik Bhatt
2020-10-30  4:10 ` Bhaumik Bhatt [this message]
2020-10-30 14:10   ` [PATCH v3 11/12] bus: mhi: core: Mark and maintain device states early on after power down Manivannan Sadhasivam
2020-10-30  4:10 ` [PATCH v3 12/12] bus: mhi: core: Remove MHI event ring IRQ handlers when powering down Bhaumik Bhatt
2020-10-30 14:11   ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1604031057-32820-12-git-send-email-bbhatt@codeaurora.org \
    --to=bbhatt@codeaurora.org \
    --cc=hemantk@codeaurora.org \
    --cc=jhugo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).