* [PATCH V5 0/2] Convert qcom,spmi-pmic bindings from .txt to .yaml @ 2020-12-30 11:56 Kiran Gunda 2020-12-30 11:56 ` [PATCH V5 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format Kiran Gunda 2020-12-30 11:56 ` [PATCH V5 2/2] mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l Kiran Gunda 0 siblings, 2 replies; 5+ messages in thread From: Kiran Gunda @ 2020-12-30 11:56 UTC (permalink / raw) To: swboyd, lee.jones, agross, bjorn.andersson, robh+dt, devicetree, linux-arm-msm, linux-kernel, robh, mark.rutland, linux-arm-msm-owner Cc: Kiran Gunda This patch series does the following: - converts the qcom,spmi-pmic bindings from .txt to .yaml format - Sorted the compatible strings - Adds PM6150 and PM6150L subtypes. Changes from V1: - Sorted the compatible strings as per Stephen Boyd's comments. - Added a patch to convert the qcom,spmi-pmic from .txt to .yaml format. Changes from V2: - Addressed Stephen Boyd and Rob Herring comments. Changes from V3: - Fixed compilation error in .yaml file. Changes from V4: - Addressed Stephen Boyd comments on .yaml conversion patch - Added "Reviewed-by" tag from Stephen Boyd - Added "Acked-for-MFD-by" tag from Lee Jones Kiran Gunda (2): mfd: qcom-spmi-pmic: Convert bindings to .yaml format mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l .../devicetree/bindings/mfd/qcom,spmi-pmic.txt | 80 -------------- .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 119 +++++++++++++++++++++ drivers/mfd/qcom-spmi-pmic.c | 4 + 3 files changed, 123 insertions(+), 80 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt create mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH V5 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format 2020-12-30 11:56 [PATCH V5 0/2] Convert qcom,spmi-pmic bindings from .txt to .yaml Kiran Gunda @ 2020-12-30 11:56 ` Kiran Gunda 2021-01-11 21:42 ` Rob Herring 2020-12-30 11:56 ` [PATCH V5 2/2] mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l Kiran Gunda 1 sibling, 1 reply; 5+ messages in thread From: Kiran Gunda @ 2020-12-30 11:56 UTC (permalink / raw) To: swboyd, lee.jones, agross, bjorn.andersson, robh+dt, devicetree, linux-arm-msm, linux-kernel, robh, mark.rutland, linux-arm-msm-owner, Stephen Boyd, Kiran Gunda Convert the bindings from .txt to .yaml format. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> --- .../devicetree/bindings/mfd/qcom,spmi-pmic.txt | 80 -------------- .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 117 +++++++++++++++++++++ 2 files changed, 117 insertions(+), 80 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt create mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt deleted file mode 100644 index 79367a4..0000000 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt +++ /dev/null @@ -1,80 +0,0 @@ - Qualcomm SPMI PMICs multi-function device bindings - -The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084 -PMICs. These PMICs use a QPNP scheme through SPMI interface. -QPNP is effectively a partitioning scheme for dividing the SPMI extended -register space up into logical pieces, and set of fixed register -locations/definitions within these regions, with some of these regions -specifically used for interrupt handling. - -The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are -interfaced to the chip via the SPMI (System Power Management Interface) bus. -Support for multiple independent functions are implemented by splitting the -16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes -each. A function can consume one or more of these fixed-size register regions. - -Required properties: -- compatible: Should contain one of: - "qcom,pm8941", - "qcom,pm8841", - "qcom,pma8084", - "qcom,pm8019", - "qcom,pm8226", - "qcom,pm8110", - "qcom,pma8084", - "qcom,pmi8962", - "qcom,pmd9635", - "qcom,pm8994", - "qcom,pmi8994", - "qcom,pm8916", - "qcom,pm8004", - "qcom,pm8909", - "qcom,pm8950", - "qcom,pmi8950", - "qcom,pm8998", - "qcom,pmi8998", - "qcom,pm8005", - or generalized "qcom,spmi-pmic". -- reg: Specifies the SPMI USID slave address for this device. - For more information see: - Documentation/devicetree/bindings/spmi/spmi.yaml - -Required properties for peripheral child nodes: -- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name. - -Optional properties for peripheral child nodes: -- interrupts: Interrupts are specified as a 4-tuple. For more information - see: - Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt -- interrupt-names: Corresponding interrupt name to the interrupts property - -Each child node of SPMI slave id represents a function of the PMIC. In the -example below the rtc device node represents a peripheral of pm8941 -SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1. - -Example: - - spmi { - compatible = "qcom,spmi-pmic-arb"; - - pm8941@0 { - compatible = "qcom,pm8941", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - - rtc { - compatible = "qcom,rtc"; - interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "alarm"; - }; - }; - - pm8941@1 { - compatible = "qcom,pm8941", "qcom,spmi-pmic"; - reg = <0x1 SPMI_USID>; - - regulator { - compatible = "qcom,regulator"; - regulator-name = "8941_boost"; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml new file mode 100644 index 0000000..b753bdb --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI PMICs multi-function device bindings + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Kiran Gunda <kgunda@codeaurora.org> + +description: | + The Qualcomm SPMI PMICs use a QPNP scheme through SPMI interface. + QPNP is effectively a partitioning scheme for dividing the SPMI extended + register space up into logical pieces, and set of fixed register + locations/definitions within these regions, with some of these regions + specifically used for interrupt handling. + + The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are + interfaced to the chip via the SPMI (System Power Management Interface) bus. + Support for multiple independent functions are implemented by splitting the + 16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes + each. A function can consume one or more of these fixed-size register regions. + +properties: + spmi_bus: + type: object + description: SPMI bus node + +patternProperties: + "^pmic@[0-9]$": + description: Child PMIC nodes + type: object + + properties: + compatible: + items: + - enum: + # Sorted based on subtype ID the device reports + - qcom,pm8941 + - qcom,pm8841 + - qcom,pma8084 + - qcom,pm8019 + - qcom,pm8226 + - qcom,pm8110 + - qcom,pma8084 + - qcom,pmi8962 + - qcom,pmd9635 + - qcom,pm8994 + - qcom,pmi8994 + - qcom,pm8916 + - qcom,pm8004 + - qcom,pm8909 + - qcom,pm8950 + - qcom,pmi8950 + - qcom,pm8998 + - qcom,pmi8998 + - qcom,pm8005 + - qcom,pm660l + - qcom,pm660 + + - enum: + - qcom,spmi-pmic + + reg: + maxItems: 1 + description: + Specifies the SPMI USID slave address for this device. + For more information see bindings/spmi/spmi.txt + + patternProperties: + "^[a-zA-Z0-9]$": + description: + Each child node of SPMI slave id represents a function of the PMIC. + In the example below the rtc device node represents a peripheral of + pm8941 SID = 0. The regulator device node represents a peripheral of + pm8941 SID = 1. + type: object + + required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + spmi_bus { + compatible = "qcom,spmi-pmic-arb"; + #address-cells = <2>; + #size-cells = <0>; + + pmic@0 { + compatible = "qcom,pm8941"; + reg = <0x0 SPMI_USID>; + + rtc { + compatible = "qcom,rtc"; + interrupts = <0x0 0x61 0x1 0x1>; + interrupt-names = "alarm"; + }; + }; + + pmic@1 { + compatible = "qcom,pm8941"; + reg = <0x1 SPMI_USID>; + + regulator { + compatible = "qcom,regulator"; + regulator-name = "8941_boost"; + }; + }; + }; +... -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH V5 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format 2020-12-30 11:56 ` [PATCH V5 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format Kiran Gunda @ 2021-01-11 21:42 ` Rob Herring 2021-02-10 13:29 ` kgunda 0 siblings, 1 reply; 5+ messages in thread From: Rob Herring @ 2021-01-11 21:42 UTC (permalink / raw) To: Kiran Gunda Cc: swboyd, lee.jones, agross, bjorn.andersson, devicetree, linux-arm-msm, linux-kernel, mark.rutland, linux-arm-msm-owner, Stephen Boyd On Wed, Dec 30, 2020 at 05:26:22PM +0530, Kiran Gunda wrote: > Convert the bindings from .txt to .yaml format. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> > --- > .../devicetree/bindings/mfd/qcom,spmi-pmic.txt | 80 -------------- > .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 117 +++++++++++++++++++++ > 2 files changed, 117 insertions(+), 80 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml > diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml > new file mode 100644 > index 0000000..b753bdb > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml > @@ -0,0 +1,117 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SPMI PMICs multi-function device bindings > + > +maintainers: > + - Stephen Boyd <sboyd@kernel.org> > + - Kiran Gunda <kgunda@codeaurora.org> > + > +description: | > + The Qualcomm SPMI PMICs use a QPNP scheme through SPMI interface. > + QPNP is effectively a partitioning scheme for dividing the SPMI extended > + register space up into logical pieces, and set of fixed register > + locations/definitions within these regions, with some of these regions > + specifically used for interrupt handling. > + > + The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are > + interfaced to the chip via the SPMI (System Power Management Interface) bus. > + Support for multiple independent functions are implemented by splitting the > + 16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes > + each. A function can consume one or more of these fixed-size register regions. > + > +properties: > + spmi_bus: > + type: object > + description: SPMI bus node This is outside the scope of this binding. > + > +patternProperties: > + "^pmic@[0-9]$": > + description: Child PMIC nodes > + type: object You've defined spmi_bus and pmic@... as siblings. I assume you meant parent/child instead. You'd need to indent all this 4 more spaces. However, this is also outside the scope of the binding and should be removed. > + > + properties: > + compatible: So this needs to be at the top level. 'compatible' is also how we decide to apply a schema to a node. What you did here will never be applied. Introduce an error to the example and see. > + items: > + - enum: > + # Sorted based on subtype ID the device reports > + - qcom,pm8941 > + - qcom,pm8841 > + - qcom,pma8084 > + - qcom,pm8019 > + - qcom,pm8226 > + - qcom,pm8110 > + - qcom,pma8084 > + - qcom,pmi8962 > + - qcom,pmd9635 > + - qcom,pm8994 > + - qcom,pmi8994 > + - qcom,pm8916 > + - qcom,pm8004 > + - qcom,pm8909 > + - qcom,pm8950 > + - qcom,pmi8950 > + - qcom,pm8998 > + - qcom,pmi8998 > + - qcom,pm8005 > + - qcom,pm660l > + - qcom,pm660 > + > + - enum: > + - qcom,spmi-pmic You can use 'const' here instead of enum. > + > + reg: > + maxItems: 1 > + description: > + Specifies the SPMI USID slave address for this device. > + For more information see bindings/spmi/spmi.txt > + > + patternProperties: > + "^[a-zA-Z0-9]$": > + description: > + Each child node of SPMI slave id represents a function of the PMIC. > + In the example below the rtc device node represents a peripheral of > + pm8941 SID = 0. The regulator device node represents a peripheral of > + pm8941 SID = 1. > + type: object No, you need to define all the child nodes. This may mean you need to split to several schemas if each PMIC has different sub devices. > + > + required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/spmi/spmi.h> > + > + spmi_bus { > + compatible = "qcom,spmi-pmic-arb"; > + #address-cells = <2>; > + #size-cells = <0>; > + > + pmic@0 { > + compatible = "qcom,pm8941"; > + reg = <0x0 SPMI_USID>; > + > + rtc { > + compatible = "qcom,rtc"; Not documented nor used anywhere. > + interrupts = <0x0 0x61 0x1 0x1>; > + interrupt-names = "alarm"; > + }; > + }; > + > + pmic@1 { > + compatible = "qcom,pm8941"; > + reg = <0x1 SPMI_USID>; > + > + regulator { > + compatible = "qcom,regulator"; Same here. > + regulator-name = "8941_boost"; > + }; > + }; > + }; > +... > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH V5 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format 2021-01-11 21:42 ` Rob Herring @ 2021-02-10 13:29 ` kgunda 0 siblings, 0 replies; 5+ messages in thread From: kgunda @ 2021-02-10 13:29 UTC (permalink / raw) To: Rob Herring Cc: swboyd, lee.jones, agross, bjorn.andersson, devicetree, linux-arm-msm, linux-kernel, mark.rutland, linux-arm-msm-owner, Stephen Boyd On 2021-01-12 03:12, Rob Herring wrote: > On Wed, Dec 30, 2020 at 05:26:22PM +0530, Kiran Gunda wrote: >> Convert the bindings from .txt to .yaml format. >> >> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> >> --- >> .../devicetree/bindings/mfd/qcom,spmi-pmic.txt | 80 >> -------------- >> .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 117 >> +++++++++++++++++++++ >> 2 files changed, 117 insertions(+), 80 deletions(-) >> delete mode 100644 >> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt >> create mode 100644 >> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml > >> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml >> b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml >> new file mode 100644 >> index 0000000..b753bdb >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml >> @@ -0,0 +1,117 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm SPMI PMICs multi-function device bindings >> + >> +maintainers: >> + - Stephen Boyd <sboyd@kernel.org> >> + - Kiran Gunda <kgunda@codeaurora.org> >> + >> +description: | >> + The Qualcomm SPMI PMICs use a QPNP scheme through SPMI interface. >> + QPNP is effectively a partitioning scheme for dividing the SPMI >> extended >> + register space up into logical pieces, and set of fixed register >> + locations/definitions within these regions, with some of these >> regions >> + specifically used for interrupt handling. >> + >> + The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, >> and are >> + interfaced to the chip via the SPMI (System Power Management >> Interface) bus. >> + Support for multiple independent functions are implemented by >> splitting the >> + 16-bit SPMI slave address space into 256 smaller fixed-size >> regions, 256 bytes >> + each. A function can consume one or more of these fixed-size >> register regions. >> + >> +properties: >> + spmi_bus: >> + type: object >> + description: SPMI bus node > > This is outside the scope of this binding. > >> + >> +patternProperties: >> + "^pmic@[0-9]$": >> + description: Child PMIC nodes >> + type: object > > You've defined spmi_bus and pmic@... as siblings. I assume you meant > parent/child instead. You'd need to indent all this 4 more spaces. > > However, this is also outside the scope of the binding and should be > removed. > >> + >> + properties: >> + compatible: > > So this needs to be at the top level. 'compatible' is also how we > decide > to apply a schema to a node. What you did here will never be applied. > Introduce an error to the example and see. > >> + items: >> + - enum: >> + # Sorted based on subtype ID the device reports >> + - qcom,pm8941 >> + - qcom,pm8841 >> + - qcom,pma8084 >> + - qcom,pm8019 >> + - qcom,pm8226 >> + - qcom,pm8110 >> + - qcom,pma8084 >> + - qcom,pmi8962 >> + - qcom,pmd9635 >> + - qcom,pm8994 >> + - qcom,pmi8994 >> + - qcom,pm8916 >> + - qcom,pm8004 >> + - qcom,pm8909 >> + - qcom,pm8950 >> + - qcom,pmi8950 >> + - qcom,pm8998 >> + - qcom,pmi8998 >> + - qcom,pm8005 >> + - qcom,pm660l >> + - qcom,pm660 >> + >> + - enum: >> + - qcom,spmi-pmic > > You can use 'const' here instead of enum. > Okay. I can address the above comments. >> + >> + reg: >> + maxItems: 1 >> + description: >> + Specifies the SPMI USID slave address for this device. >> + For more information see bindings/spmi/spmi.txt >> + >> + patternProperties: >> + "^[a-zA-Z0-9]$": >> + description: >> + Each child node of SPMI slave id represents a function of >> the PMIC. >> + In the example below the rtc device node represents a >> peripheral of >> + pm8941 SID = 0. The regulator device node represents a >> peripheral of >> + pm8941 SID = 1. >> + type: object > > No, you need to define all the child nodes. This may mean you need to > split to several schemas if each PMIC has different sub devices. > Currently all the different child node bindings have not been converted to .yaml. That means probably I can't convert this to .yaml unless all the child schemas are available? >> + >> + required: >> + - compatible >> + - reg >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/spmi/spmi.h> >> + >> + spmi_bus { >> + compatible = "qcom,spmi-pmic-arb"; >> + #address-cells = <2>; >> + #size-cells = <0>; >> + >> + pmic@0 { >> + compatible = "qcom,pm8941"; >> + reg = <0x0 SPMI_USID>; >> + >> + rtc { >> + compatible = "qcom,rtc"; > > Not documented nor used anywhere. > >> + interrupts = <0x0 0x61 0x1 0x1>; >> + interrupt-names = "alarm"; >> + }; >> + }; >> + >> + pmic@1 { >> + compatible = "qcom,pm8941"; >> + reg = <0x1 SPMI_USID>; >> + >> + regulator { >> + compatible = "qcom,regulator"; > > Same here. > >> + regulator-name = "8941_boost"; >> + }; >> + }; >> + }; >> +... >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >> a Linux Foundation Collaborative Project >> ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH V5 2/2] mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l 2020-12-30 11:56 [PATCH V5 0/2] Convert qcom,spmi-pmic bindings from .txt to .yaml Kiran Gunda 2020-12-30 11:56 ` [PATCH V5 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format Kiran Gunda @ 2020-12-30 11:56 ` Kiran Gunda 1 sibling, 0 replies; 5+ messages in thread From: Kiran Gunda @ 2020-12-30 11:56 UTC (permalink / raw) To: swboyd, lee.jones, agross, bjorn.andersson, robh+dt, devicetree, linux-arm-msm, linux-kernel, robh, mark.rutland, linux-arm-msm-owner, Stephen Boyd, Kiran Gunda Add the compatibles and PMIC ids for pm6150 and pm6150l PMICs found on SC7180 based platforms. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> --- Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 2 ++ drivers/mfd/qcom-spmi-pmic.c | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index b753bdb..151953a 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -59,6 +59,8 @@ patternProperties: - qcom,pm8005 - qcom,pm660l - qcom,pm660 + - qcom,pm6150l + - qcom,pm6150 - enum: - qcom,spmi-pmic diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c index a35d5cf..78e9084 100644 --- a/drivers/mfd/qcom-spmi-pmic.c +++ b/drivers/mfd/qcom-spmi-pmic.c @@ -38,6 +38,8 @@ #define PM8005_SUBTYPE 0x18 #define PM660L_SUBTYPE 0x1A #define PM660_SUBTYPE 0x1B +#define PM6150L_SUBTYPE 0x1F +#define PM6150_SUBTYPE 0x28 static const struct of_device_id pmic_spmi_id_table[] = { { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, @@ -61,6 +63,8 @@ static const struct of_device_id pmic_spmi_id_table[] = { { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, + { .compatible = "qcom,pm6150l", .data = (void *)PM6150L_SUBTYPE }, + { .compatible = "qcom,pm6150", .data = (void *)PM6150_SUBTYPE }, { } }; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-02-10 13:30 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-12-30 11:56 [PATCH V5 0/2] Convert qcom,spmi-pmic bindings from .txt to .yaml Kiran Gunda 2020-12-30 11:56 ` [PATCH V5 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format Kiran Gunda 2021-01-11 21:42 ` Rob Herring 2021-02-10 13:29 ` kgunda 2020-12-30 11:56 ` [PATCH V5 2/2] mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l Kiran Gunda
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).