linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
To: sboyd@kernel.org, agross@kernel.org, bjorn.andersson@linaro.org,
	david.brown@linaro.org, devicetree@vger.kernel.org,
	jassisinghbrar@gmail.com, linux-arm-msm@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-remoteproc@vger.kernel.org, mark.rutland@arm.com,
	mturquette@baylibre.com, ohad@wizery.com, robh+dt@kernel.org,
	sricharan@codeaurora.org, gokulsri@codeaurora.org
Subject: [PATCH 2/3] remoteproc: qcom: wcss: populate driver data for IPQ6018
Date: Fri, 29 Jan 2021 22:41:59 +0530	[thread overview]
Message-ID: <1611940320-24830-3-git-send-email-gokulsri@codeaurora.org> (raw)
In-Reply-To: <1611940320-24830-1-git-send-email-gokulsri@codeaurora.org>

Populate hardcoded param using driver data for IPQ6018 SoCs.

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_wcss.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 7c64bfc..bc9531c 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -965,7 +965,7 @@ static int q6v5_alloc_memory_region(struct q6v5_wcss *wcss)
 	return 0;
 }
 
-static int ipq8074_init_clock(struct q6v5_wcss *wcss)
+static int ipq_init_clock(struct q6v5_wcss *wcss)
 {
 	int ret;
 
@@ -1172,7 +1172,7 @@ static int q6v5_wcss_remove(struct platform_device *pdev)
 }
 
 static const struct wcss_data wcss_ipq8074_res_init = {
-	.init_clock = ipq8074_init_clock,
+	.init_clock = ipq_init_clock,
 	.q6_firmware_name = "IPQ8074/q6_fw.mdt",
 	.m3_firmware_name = "IPQ8074/m3_fw.mdt",
 	.crash_reason_smem = WCSS_CRASH_REASON,
@@ -1185,6 +1185,20 @@ static const struct wcss_data wcss_ipq8074_res_init = {
 	.need_mem_protection = true,
 };
 
+static const struct wcss_data wcss_ipq6018_res_init = {
+	.init_clock = ipq_init_clock,
+	.q6_firmware_name = "IPQ6018/q6_fw.mdt",
+	.m3_firmware_name = "IPQ6018/m3_fw.mdt",
+	.crash_reason_smem = WCSS_CRASH_REASON,
+	.aon_reset_required = true,
+	.wcss_q6_reset_required = true,
+	.bcr_reset_required = false,
+	.ssr_name = "q6wcss",
+	.ops = &q6v5_wcss_ipq8074_ops,
+	.requires_force_stop = true,
+	.need_mem_protection = true,
+};
+
 static const struct wcss_data wcss_qcs404_res_init = {
 	.init_clock = qcs404_init_clock,
 	.init_regulator = qcs404_init_regulator,
@@ -1203,6 +1217,7 @@ static const struct wcss_data wcss_qcs404_res_init = {
 
 static const struct of_device_id q6v5_wcss_of_match[] = {
 	{ .compatible = "qcom,ipq8074-wcss-pil", .data = &wcss_ipq8074_res_init },
+	{ .compatible = "qcom,ipq6018-wcss-pil", .data = &wcss_ipq6018_res_init },
 	{ .compatible = "qcom,qcs404-wcss-pil", .data = &wcss_qcs404_res_init },
 	{ },
 };
-- 
2.7.4


  parent reply	other threads:[~2021-01-29 17:14 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-29 17:11 [PATCH 0/3] remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018 Gokul Sriram Palanisamy
2021-01-29 17:11 ` [PATCH 1/3] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding " Gokul Sriram Palanisamy
2021-02-09 20:05   ` Rob Herring
2021-01-29 17:11 ` Gokul Sriram Palanisamy [this message]
2021-03-18  2:10   ` [PATCH 2/3] remoteproc: qcom: wcss: populate driver data " Bjorn Andersson
2021-01-29 17:12 ` [PATCH 3/3] arm64: dts: ipq6018: Update WCSS PIL driver compatible Gokul Sriram Palanisamy
  -- strict thread matches above, loose matches on Subject: below --
2021-01-29 17:09 [PATCH 0/3] remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018 Gokul Sriram Palanisamy
2021-01-29 17:09 ` [PATCH 2/3] remoteproc: qcom: wcss: populate " Gokul Sriram Palanisamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1611940320-24830-3-git-send-email-gokulsri@codeaurora.org \
    --to=gokulsri@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sricharan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).