Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Bhaumik Bhatt <bbhatt@codeaurora.org>
To: manivannan.sadhasivam@linaro.org
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
	jhugo@codeaurora.org, linux-kernel@vger.kernel.org,
	carl.yin@quectel.com, naveen.kumar@quectel.com,
	loic.poulain@linaro.org, abickett@codeaurora.org,
	Bhaumik Bhatt <bbhatt@codeaurora.org>
Subject: [PATCH v1 0/7] MHI Emergency download and flash programmer support
Date: Mon, 29 Mar 2021 18:28:17 -0700
Message-ID: <1617067704-28850-1-git-send-email-bbhatt@codeaurora.org> (raw)

Allow handling EDL mode after SYS_ERROR occurs by reading the execution
environment post handling and move to power on reset state to accommodate the
scenario.
Handle EDL mode properly and wait for ready instead of just exiting from the
firmware load.
Allow use of the Flash Programmer execution environment as a mission mode
use case for a blank NAND power up scenario.
Always attempt a wait for MHI ready state as device could be waiting for the
host to do so after pass through execution environment is seen.
Introduce patch to improve state awareness and aid in debugging.

This patch series was tested on x86_64 architecture.

Bhaumik Bhatt (6):
  bus: mhi: core: Rely on accurate method to determine EDL mode
  bus: mhi: core: Wait for ready after an EDL firmware download
  bus: mhi: core: Handle EDL mode entry appropriately
  bus: mhi: core: Identify Flash Programmer as a mission mode use case
  bus: mhi: core: Wait for MHI READY state in most scenarios
  bus: mhi: core: Improve state strings for debug messages

Carl Yin (1):
  bus: mhi: core: Add support for Flash Programmer execution environment

 drivers/bus/mhi/core/boot.c     | 13 +++++++------
 drivers/bus/mhi/core/init.c     | 34 ++++++++++++++++++----------------
 drivers/bus/mhi/core/internal.h |  4 +++-
 drivers/bus/mhi/core/main.c     |  3 +++
 drivers/bus/mhi/core/pm.c       | 28 +++++++++++++++++++++++++---
 include/linux/mhi.h             |  4 +++-
 6 files changed, 59 insertions(+), 27 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


             reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-30  1:28 Bhaumik Bhatt [this message]
2021-03-30  1:28 ` [PATCH v1 1/7] bus: mhi: core: Rely on accurate method to determine EDL mode Bhaumik Bhatt
2021-03-30  8:00   ` Loic Poulain
2021-03-30  1:28 ` [PATCH v1 2/7] bus: mhi: core: Wait for ready after an EDL firmware download Bhaumik Bhatt
2021-03-30  8:01   ` Loic Poulain
2021-03-30  1:28 ` [PATCH v1 3/7] bus: mhi: core: Handle EDL mode entry appropriately Bhaumik Bhatt
2021-03-30  8:01   ` Loic Poulain
2021-03-31 10:59   ` Manivannan Sadhasivam
2021-03-30  1:28 ` [PATCH v1 4/7] bus: mhi: core: Add support for Flash Programmer execution environment Bhaumik Bhatt
2021-03-30  8:02   ` Loic Poulain
2021-03-31 11:11   ` Manivannan Sadhasivam
2021-03-30  1:28 ` [PATCH v1 5/7] bus: mhi: core: Identify Flash Programmer as a mission mode use case Bhaumik Bhatt
2021-03-30  8:02   ` Loic Poulain
2021-03-30  1:28 ` [PATCH v1 6/7] bus: mhi: core: Wait for MHI READY state in most scenarios Bhaumik Bhatt
2021-03-30  8:03   ` Loic Poulain
2021-03-31 11:13   ` Manivannan Sadhasivam
2021-03-30  1:28 ` [PATCH v1 7/7] bus: mhi: core: Improve state strings for debug messages Bhaumik Bhatt
2021-03-30  8:03   ` Loic Poulain
2021-03-31 11:16 ` [PATCH v1 0/7] MHI Emergency download and flash programmer support Manivannan Sadhasivam
2021-03-31 17:01   ` Bhaumik Bhatt
2021-03-31 11:24 ` Manivannan Sadhasivam
2021-05-26 19:03 ` patchwork-bot+linux-arm-msm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1617067704-28850-1-git-send-email-bbhatt@codeaurora.org \
    --to=bbhatt@codeaurora.org \
    --cc=abickett@codeaurora.org \
    --cc=carl.yin@quectel.com \
    --cc=hemantk@codeaurora.org \
    --cc=jhugo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=naveen.kumar@quectel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git