linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v7 0/5] Introduce SoC sleep stats driver
@ 2021-04-06 10:27 Maulik Shah
  2021-04-06 10:27 ` [PATCH v7 1/5] dt-bindings: Introduce SoC sleep stats bindings Maulik Shah
                   ` (4 more replies)
  0 siblings, 5 replies; 9+ messages in thread
From: Maulik Shah @ 2021-04-06 10:27 UTC (permalink / raw)
  To: swboyd, mka, evgreen, bjorn.andersson
  Cc: linux-arm-msm, linux-kernel, agross, dianders, linux, rnayak,
	lsrao, Maulik Shah

Changes in v7:
- Fix example in bindings documentation as per #address/size-cells = <1>.
- Add comment in driver from where 'ddr' subsystems name is read.
- Update comment in driver to s/beside/besides and others from v6.
- Rename debugfs_create_entries() from v6.
- Drop use of memcpy_fromio() to find the name.
- Use sizeof(*prv_data) in devm_kzalloc().
- Add change to define readq() if its not yet defined for compile support.
- Add wpss subsystem in the list of subsystems.
- Add module soft dependency on smem module.
- Add new change to add device node for sc7280.

Changes in v6:
- Address stephen's comments from v5 which includes below
- Pad 0 in documentation example to make address 8 digit
- define macro to calculate offset in driver
- Add appended_stats_avail to prv_data instead of using entire stats_config
- make array subsystems[] as const
- Add comment for SSR case
- Use memcpy_fromio() and devm_kcalloc() during probe
- Change file permission mode from 444 to 400 

- Address guenter's comments to add depends on QCOM_SMEM

- Add adsp_island and cdsp_island subsystems
- Use strim() to remove whitespace in stat name

Changes in v5:
- Remove underscore from node name in Documentation and DTSI change
- Remove global config from driver change

Changes in v4:
- Address bjorn's comments from v3 on change 2.
- Add bjorn's Reviewed-by on change 3 and 4.

Changes in v3:
- Address stephen's comments from v2 in change 1 and 2.
- Address bjorn's comments from v2 in change 3 and 4.
- Add Rob and bjorn's Reviewed-by on YAML change.

Changes in v2:
- Convert Documentation to YAML.
- Address stephen's comments from v1.
- Use debugfs instead of sysfs.
- Add sc7180 dts changes for sleep stats
- Add defconfig changes to enable driver
- Include subsystem stats from [1] in this single stats driver.
- Address stephen's comments from [1]
- Update cover letter inline to mention [1]

Qualcomm Technologies, Inc. (QTI)'s chipsets support SoC level low power
modes. SoCs Always On Processor/Resource Power Manager produces statistics
of the SoC sleep modes involving lowering or powering down of the rails and
the oscillator clock.

Additionally multiple subsystems present on SoC like modem, spss, adsp,
cdsp maintains their low power mode statistics in shared memory (SMEM).

Statistics includes SoC sleep mode type, number of times LPM entered, time
of last entry, exit, and accumulated sleep duration in seconds.

This series adds a driver to read the stats and export to debugfs.

[1] https://lore.kernel.org/patchwork/patch/1149381/

Mahesh Sivasubramanian (2):
  dt-bindings: Introduce SoC sleep stats bindings
  soc: qcom: Add SoC sleep stats driver

Maulik Shah (3):
  arm64: dts: qcom: sc7180: Enable SoC sleep stats
  arm64: defconfig: Enable SoC sleep stats driver
  arm64: dts: qcom: sc7280: Enable SoC sleep stats

 .../bindings/soc/qcom/soc-sleep-stats.yaml         |  48 ++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |   7 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |   5 +
 arch/arm64/configs/defconfig                       |   1 +
 drivers/soc/qcom/Kconfig                           |  10 +
 drivers/soc/qcom/Makefile                          |   1 +
 drivers/soc/qcom/soc_sleep_stats.c                 | 281 +++++++++++++++++++++
 7 files changed, 352 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/soc-sleep-stats.yaml
 create mode 100644 drivers/soc/qcom/soc_sleep_stats.c

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v7 1/5] dt-bindings: Introduce SoC sleep stats bindings
  2021-04-06 10:27 [PATCH v7 0/5] Introduce SoC sleep stats driver Maulik Shah
@ 2021-04-06 10:27 ` Maulik Shah
  2021-04-06 10:27 ` [PATCH v7 2/5] soc: qcom: Add SoC sleep stats driver Maulik Shah
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 9+ messages in thread
From: Maulik Shah @ 2021-04-06 10:27 UTC (permalink / raw)
  To: swboyd, mka, evgreen, bjorn.andersson
  Cc: linux-arm-msm, linux-kernel, agross, dianders, linux, rnayak,
	lsrao, Mahesh Sivasubramanian, devicetree, Lina Iyer,
	Maulik Shah

From: Mahesh Sivasubramanian <msivasub@codeaurora.org>

Add device binding documentation for Qualcomm Technologies, Inc. (QTI)
SoC sleep stats driver. The driver is used for displaying SoC sleep
statistic maintained by Always On Processor or Resource Power Manager.

Cc: devicetree@vger.kernel.org
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 .../bindings/soc/qcom/soc-sleep-stats.yaml         | 48 ++++++++++++++++++++++
 1 file changed, 48 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/soc-sleep-stats.yaml

diff --git a/Documentation/devicetree/bindings/soc/qcom/soc-sleep-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/soc-sleep-stats.yaml
new file mode 100644
index 0000000..9078c4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/soc-sleep-stats.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/soc-sleep-stats.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) SoC sleep stats bindings
+
+maintainers:
+  - Maulik Shah <mkshah@codeaurora.org>
+  - Lina Iyer <ilina@codeaurora.org>
+
+description:
+  Always On Processor/Resource Power Manager maintains statistics of the SoC
+  sleep modes involving powering down of the rails and oscillator clock.
+
+  Statistics includes SoC sleep mode type, number of times low power mode were
+  entered, time of last entry, time of last exit and accumulated sleep duration.
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpmh-sleep-stats
+      - qcom,rpm-sleep-stats
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Example of rpmh sleep stats
+  - |
+    rpmh-sleep-stats@c3f0000 {
+      compatible = "qcom,rpmh-sleep-stats";
+      reg = <0x0c3f0000 0x400>;
+    };
+  # Example of rpm sleep stats
+  - |
+    rpm-sleep-stats@4690000 {
+      compatible = "qcom,rpm-sleep-stats";
+      reg = <0x04690000 0x400>;
+    };
+...
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v7 2/5] soc: qcom: Add SoC sleep stats driver
  2021-04-06 10:27 [PATCH v7 0/5] Introduce SoC sleep stats driver Maulik Shah
  2021-04-06 10:27 ` [PATCH v7 1/5] dt-bindings: Introduce SoC sleep stats bindings Maulik Shah
@ 2021-04-06 10:27 ` Maulik Shah
  2021-04-12 23:43   ` Bjorn Andersson
  2021-04-06 10:27 ` [PATCH v7 3/5] arm64: dts: qcom: sc7180: Enable SoC sleep stats Maulik Shah
                   ` (2 subsequent siblings)
  4 siblings, 1 reply; 9+ messages in thread
From: Maulik Shah @ 2021-04-06 10:27 UTC (permalink / raw)
  To: swboyd, mka, evgreen, bjorn.andersson
  Cc: linux-arm-msm, linux-kernel, agross, dianders, linux, rnayak,
	lsrao, Mahesh Sivasubramanian, Lina Iyer, Maulik Shah

From: Mahesh Sivasubramanian <msivasub@codeaurora.org>

Let's add a driver to read the stats from remote processor and
export to debugfs.

The driver creates "qcom_sleep_stats" directory in debugfs and
adds files for various low power mode available. Below is sample
output with command

cat /sys/kernel/debug/qcom_sleep_stats/ddr
count = 0
Last Entered At = 0
Last Exited At = 0
Accumulated Duration = 0

Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[mkshah: add subsystem sleep stats, create one file for each stat]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 drivers/soc/qcom/Kconfig           |  10 ++
 drivers/soc/qcom/Makefile          |   1 +
 drivers/soc/qcom/soc_sleep_stats.c | 281 +++++++++++++++++++++++++++++++++++++
 3 files changed, 292 insertions(+)
 create mode 100644 drivers/soc/qcom/soc_sleep_stats.c

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 79b568f..e80b63a 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -190,6 +190,16 @@ config QCOM_SOCINFO
 	 Say yes here to support the Qualcomm socinfo driver, providing
 	 information about the SoC to user space.
 
+config QCOM_SOC_SLEEP_STATS
+	tristate "Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver"
+	depends on ARCH_QCOM && DEBUG_FS || COMPILE_TEST
+	depends on QCOM_SMEM
+	help
+	  Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver to read
+	  the shared memory exported by the remote processor related to
+	  various SoC level low power modes statistics and export to debugfs
+	  interface.
+
 config QCOM_WCNSS_CTRL
 	tristate "Qualcomm WCNSS control driver"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index ad675a6..5f30d74 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
 obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
 obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
 obj-$(CONFIG_QCOM_SOCINFO)	+= socinfo.o
+obj-$(CONFIG_QCOM_SOC_SLEEP_STATS)	+= soc_sleep_stats.o
 obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
 obj-$(CONFIG_QCOM_APR) += apr.o
 obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
diff --git a/drivers/soc/qcom/soc_sleep_stats.c b/drivers/soc/qcom/soc_sleep_stats.c
new file mode 100644
index 0000000..6dfc239
--- /dev/null
+++ b/drivers/soc/qcom/soc_sleep_stats.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2011-2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/soc/qcom/smem.h>
+#include <clocksource/arm_arch_timer.h>
+
+#define STAT_TYPE_ADDR		0x0
+#define COUNT_ADDR		0x4
+#define LAST_ENTERED_AT_ADDR	0x8
+#define LAST_EXITED_AT_ADDR	0x10
+#define ACCUMULATED_ADDR	0x18
+#define CLIENT_VOTES_ADDR	0x1c
+
+#define STAT_OFFSET(record_no, type) (((record_no)*(sizeof(struct sleep_stats))) + (type))
+#define APPENDED_STAT_OFFSET(record_no) ((record_no)*(sizeof(struct appended_stats)))
+
+#ifndef readq
+#define readq(a) ({			\
+	u64 val = readl((a) + 4);	\
+	val <<= 32;			\
+	val |=  readl((a));		\
+	val;				\
+})
+#endif
+
+struct subsystem_data {
+	const char *name;
+	u32 smem_item;
+	u32 pid;
+};
+
+static const struct subsystem_data subsystems[] = {
+	{ "modem", 605, 1 },
+	{ "wpss", 605, 13 },
+	{ "adsp", 606, 2 },
+	{ "cdsp", 607, 5 },
+	{ "slpi", 608, 3 },
+	{ "gpu", 609, 0 },
+	{ "display", 610, 0 },
+	{ "adsp_island", 613, 2 },
+	{ "slpi_island", 613, 3 },
+};
+
+struct stats_config {
+	u32 offset_addr;
+	u32 num_records;
+	bool appended_stats_avail;
+};
+
+struct stats_prv_data {
+	bool appended_stats_avail;
+	void __iomem *reg;
+};
+
+struct sleep_stats {
+	u32 stat_type;
+	u32 count;
+	u64 last_entered_at;
+	u64 last_exited_at;
+	u64 accumulated;
+};
+
+struct appended_stats {
+	u32 client_votes;
+	u32 reserved[3];
+};
+
+static void print_sleep_stats(struct seq_file *s, const struct sleep_stats *stat)
+{
+	u64 accumulated = stat->accumulated;
+	/*
+	 * If a subsystem is in sleep when reading the sleep stats adjust
+	 * the accumulated sleep duration to show actual sleep time.
+	 */
+	if (stat->last_entered_at > stat->last_exited_at)
+		accumulated += arch_timer_read_counter()
+			       - stat->last_entered_at;
+
+	seq_printf(s, "Count = %u\n", stat->count);
+	seq_printf(s, "Last Entered At = %llu\n", stat->last_entered_at);
+	seq_printf(s, "Last Exited At = %llu\n", stat->last_exited_at);
+	seq_printf(s, "Accumulated Duration = %llu\n", accumulated);
+}
+
+static int subsystem_sleep_stats_show(struct seq_file *s, void *d)
+{
+	struct subsystem_data *subsystem = s->private;
+	struct sleep_stats *stat;
+
+	/*
+	 * Saving this pointer during probe may not help in cases like
+	 * subsystem restart, besides not every subsystem is a remote processor
+	 * for example gpu for which we can get start and stop notification.
+	 *
+	 * Lookup smem pointer each time to keep it simple.
+	 */
+	stat = qcom_smem_get(subsystem->pid, subsystem->smem_item, NULL);
+	if (IS_ERR(stat))
+		return PTR_ERR(stat);
+
+	print_sleep_stats(s, stat);
+
+	return 0;
+}
+
+static int soc_sleep_stats_show(struct seq_file *s, void *d)
+{
+	struct stats_prv_data *prv_data = s->private;
+	void __iomem *reg = prv_data->reg;
+	struct sleep_stats stat;
+
+	stat.count = readl(reg + COUNT_ADDR);
+	stat.last_entered_at = readq(reg + LAST_ENTERED_AT_ADDR);
+	stat.last_exited_at = readq(reg + LAST_EXITED_AT_ADDR);
+	stat.accumulated = readq(reg + ACCUMULATED_ADDR);
+
+	print_sleep_stats(s, &stat);
+
+	if (prv_data->appended_stats_avail) {
+		struct appended_stats app_stat;
+
+		app_stat.client_votes = readl(reg + CLIENT_VOTES_ADDR);
+		seq_printf(s, "Client_votes = %#x\n", app_stat.client_votes);
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(soc_sleep_stats);
+DEFINE_SHOW_ATTRIBUTE(subsystem_sleep_stats);
+
+static struct dentry *
+soc_sleep_stats_create_debugfs_entries(void __iomem *reg,
+				       struct stats_prv_data *prv_data,
+				       u32 num_records)
+{
+	struct dentry *root;
+	struct sleep_stats *stat;
+	char stat_type[sizeof(u32)] = {0};
+	u32 offset, type;
+	int i, j;
+
+	root = debugfs_create_dir("qcom_sleep_stats", NULL);
+
+	for (i = 0; i < num_records; i++) {
+		offset = STAT_OFFSET(i, STAT_TYPE_ADDR);
+
+		if (prv_data[i].appended_stats_avail)
+			offset += APPENDED_STAT_OFFSET(i);
+
+		prv_data[i].reg = reg + offset;
+
+		/*
+		 * Read the low power mode name and create debugfs file for it.
+		 * The names read could be of below,
+		 * (may change depending on low power mode supported).
+		 * For rpmh-sleep-stats: "aosd", "cxsd" and "ddr".
+		 * For rpm-sleep-stats: "vmin" and "vlow".
+		 */
+		type = readl(prv_data[i].reg);
+		for (j = 0; j < sizeof(u32); j++) {
+			stat_type[j] = type & 0xff;
+			type = type >> 8;
+		}
+		strim(stat_type);
+		debugfs_create_file(stat_type, 0400, root,
+				    &prv_data[i],
+				    &soc_sleep_stats_fops);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(subsystems); i++) {
+		stat = qcom_smem_get(subsystems[i].pid, subsystems[i].smem_item,
+				     NULL);
+		if (IS_ERR(stat))
+			continue;
+
+		debugfs_create_file(subsystems[i].name, 0400, root,
+				    (void *)&subsystems[i],
+				    &subsystem_sleep_stats_fops);
+	}
+
+	return root;
+}
+
+static int soc_sleep_stats_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *reg;
+	void __iomem *offset_addr;
+	phys_addr_t stats_base;
+	resource_size_t stats_size;
+	struct dentry *root;
+	const struct stats_config *config;
+	struct stats_prv_data *prv_data;
+	int i;
+
+	config = device_get_match_data(&pdev->dev);
+	if (!config)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return PTR_ERR(res);
+
+	offset_addr = ioremap(res->start + config->offset_addr, sizeof(u32));
+	if (IS_ERR(offset_addr))
+		return PTR_ERR(offset_addr);
+
+	stats_base = res->start | readl_relaxed(offset_addr);
+	stats_size = resource_size(res);
+	iounmap(offset_addr);
+
+	reg = devm_ioremap(&pdev->dev, stats_base, stats_size);
+	if (!reg)
+		return -ENOMEM;
+
+	prv_data = devm_kcalloc(&pdev->dev, config->num_records,
+				sizeof(*prv_data), GFP_KERNEL);
+	if (!prv_data)
+		return -ENOMEM;
+
+	for (i = 0; i < config->num_records; i++)
+		prv_data[i].appended_stats_avail = config->appended_stats_avail;
+
+	root = soc_sleep_stats_create_debugfs_entries(reg, prv_data,
+						      config->num_records);
+	platform_set_drvdata(pdev, root);
+
+	return 0;
+}
+
+static int soc_sleep_stats_remove(struct platform_device *pdev)
+{
+	struct dentry *root = platform_get_drvdata(pdev);
+
+	debugfs_remove_recursive(root);
+
+	return 0;
+}
+
+static const struct stats_config rpm_data = {
+	.offset_addr = 0x14,
+	.num_records = 2,
+	.appended_stats_avail = true,
+};
+
+static const struct stats_config rpmh_data = {
+	.offset_addr = 0x4,
+	.num_records = 3,
+	.appended_stats_avail = false,
+};
+
+static const struct of_device_id soc_sleep_stats_table[] = {
+	{ .compatible = "qcom,rpm-sleep-stats", .data = &rpm_data },
+	{ .compatible = "qcom,rpmh-sleep-stats", .data = &rpmh_data },
+	{ }
+};
+
+static struct platform_driver soc_sleep_stats_driver = {
+	.probe = soc_sleep_stats_probe,
+	.remove = soc_sleep_stats_remove,
+	.driver = {
+		.name = "soc_sleep_stats",
+		.of_match_table = soc_sleep_stats_table,
+	},
+};
+module_platform_driver(soc_sleep_stats_driver);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) SoC Sleep Stats driver");
+MODULE_LICENSE("GPL v2");
+MODULE_SOFTDEP("pre: smem");
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v7 3/5] arm64: dts: qcom: sc7180: Enable SoC sleep stats
  2021-04-06 10:27 [PATCH v7 0/5] Introduce SoC sleep stats driver Maulik Shah
  2021-04-06 10:27 ` [PATCH v7 1/5] dt-bindings: Introduce SoC sleep stats bindings Maulik Shah
  2021-04-06 10:27 ` [PATCH v7 2/5] soc: qcom: Add SoC sleep stats driver Maulik Shah
@ 2021-04-06 10:27 ` Maulik Shah
  2021-04-06 10:27 ` [PATCH v7 4/5] arm64: defconfig: Enable SoC sleep stats driver Maulik Shah
  2021-04-06 10:27 ` [PATCH v7 5/5] arm64: dts: qcom: sc7280: Enable SoC sleep stats Maulik Shah
  4 siblings, 0 replies; 9+ messages in thread
From: Maulik Shah @ 2021-04-06 10:27 UTC (permalink / raw)
  To: swboyd, mka, evgreen, bjorn.andersson
  Cc: linux-arm-msm, linux-kernel, agross, dianders, linux, rnayak,
	lsrao, Maulik Shah, devicetree

Add device node for SoC sleep stats driver which provides various
low power mode stats.

Also update the reg size of aoss_qmp device to 0x400.

Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 83fbb48..201be6e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3215,7 +3215,7 @@
 
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sc7180-aoss-qmp";
-			reg = <0 0x0c300000 0 0x100000>;
+			reg = <0 0x0c300000 0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&apss_shared 0>;
 
@@ -3223,6 +3223,11 @@
 			#power-domain-cells = <1>;
 		};
 
+		rpmh-sleep-stats@c3f0000 {
+			compatible = "qcom,rpmh-sleep-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c440000 0 0x1100>,
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v7 4/5] arm64: defconfig: Enable SoC sleep stats driver
  2021-04-06 10:27 [PATCH v7 0/5] Introduce SoC sleep stats driver Maulik Shah
                   ` (2 preceding siblings ...)
  2021-04-06 10:27 ` [PATCH v7 3/5] arm64: dts: qcom: sc7180: Enable SoC sleep stats Maulik Shah
@ 2021-04-06 10:27 ` Maulik Shah
  2021-04-06 10:27 ` [PATCH v7 5/5] arm64: dts: qcom: sc7280: Enable SoC sleep stats Maulik Shah
  4 siblings, 0 replies; 9+ messages in thread
From: Maulik Shah @ 2021-04-06 10:27 UTC (permalink / raw)
  To: swboyd, mka, evgreen, bjorn.andersson
  Cc: linux-arm-msm, linux-kernel, agross, dianders, linux, rnayak,
	lsrao, Maulik Shah

Enable SoC sleep stats driver. The driver gives statistics for
various low power modes on Qualcomm Technologies, Inc. (QTI) SoCs.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 56398b5..326458e 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1011,6 +1011,7 @@ CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y
 CONFIG_QCOM_SOCINFO=m
+CONFIG_QCOM_SOC_SLEEP_STATS=m
 CONFIG_QCOM_APR=m
 CONFIG_ARCH_R8A774A1=y
 CONFIG_ARCH_R8A774B1=y
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v7 5/5] arm64: dts: qcom: sc7280: Enable SoC sleep stats
  2021-04-06 10:27 [PATCH v7 0/5] Introduce SoC sleep stats driver Maulik Shah
                   ` (3 preceding siblings ...)
  2021-04-06 10:27 ` [PATCH v7 4/5] arm64: defconfig: Enable SoC sleep stats driver Maulik Shah
@ 2021-04-06 10:27 ` Maulik Shah
  4 siblings, 0 replies; 9+ messages in thread
From: Maulik Shah @ 2021-04-06 10:27 UTC (permalink / raw)
  To: swboyd, mka, evgreen, bjorn.andersson
  Cc: linux-arm-msm, linux-kernel, agross, dianders, linux, rnayak,
	lsrao, Maulik Shah, devicetree

Add device node for SoC sleep stats driver which provides various
low power mode stats.

Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 39cf0be..197a925 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -318,6 +318,11 @@
 			interrupt-controller;
 		};
 
+		rpmh-sleep-stats@c3f0000 {
+			compatible = "qcom,rpmh-sleep-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c440000 0 0x1100>,
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v7 2/5] soc: qcom: Add SoC sleep stats driver
  2021-04-06 10:27 ` [PATCH v7 2/5] soc: qcom: Add SoC sleep stats driver Maulik Shah
@ 2021-04-12 23:43   ` Bjorn Andersson
  2021-05-21 11:10     ` Maulik Shah
  0 siblings, 1 reply; 9+ messages in thread
From: Bjorn Andersson @ 2021-04-12 23:43 UTC (permalink / raw)
  To: Maulik Shah
  Cc: swboyd, mka, evgreen, linux-arm-msm, linux-kernel, agross,
	dianders, linux, rnayak, lsrao, Mahesh Sivasubramanian,
	Lina Iyer

On Tue 06 Apr 05:27 CDT 2021, Maulik Shah wrote:

> From: Mahesh Sivasubramanian <msivasub@codeaurora.org>
> 
> Let's add a driver to read the stats from remote processor and
> export to debugfs.
> 
> The driver creates "qcom_sleep_stats" directory in debugfs and
> adds files for various low power mode available. Below is sample
> output with command
> 
> cat /sys/kernel/debug/qcom_sleep_stats/ddr
> count = 0
> Last Entered At = 0
> Last Exited At = 0
> Accumulated Duration = 0
> 
> Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
> [mkshah: add subsystem sleep stats, create one file for each stat]
> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>

Thanks for picking this up again Maulik, I hope we can get it merged
soon.

> ---
>  drivers/soc/qcom/Kconfig           |  10 ++
>  drivers/soc/qcom/Makefile          |   1 +
>  drivers/soc/qcom/soc_sleep_stats.c | 281 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 292 insertions(+)
>  create mode 100644 drivers/soc/qcom/soc_sleep_stats.c
> 
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 79b568f..e80b63a 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -190,6 +190,16 @@ config QCOM_SOCINFO
>  	 Say yes here to support the Qualcomm socinfo driver, providing
>  	 information about the SoC to user space.
>  
> +config QCOM_SOC_SLEEP_STATS
> +	tristate "Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver"
> +	depends on ARCH_QCOM && DEBUG_FS || COMPILE_TEST
> +	depends on QCOM_SMEM
> +	help
> +	  Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver to read
> +	  the shared memory exported by the remote processor related to
> +	  various SoC level low power modes statistics and export to debugfs
> +	  interface.
> +
>  config QCOM_WCNSS_CTRL
>  	tristate "Qualcomm WCNSS control driver"
>  	depends on ARCH_QCOM || COMPILE_TEST
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index ad675a6..5f30d74 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>  obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
>  obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
>  obj-$(CONFIG_QCOM_SOCINFO)	+= socinfo.o
> +obj-$(CONFIG_QCOM_SOC_SLEEP_STATS)	+= soc_sleep_stats.o
>  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>  obj-$(CONFIG_QCOM_APR) += apr.o
>  obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
> diff --git a/drivers/soc/qcom/soc_sleep_stats.c b/drivers/soc/qcom/soc_sleep_stats.c
> new file mode 100644
> index 0000000..6dfc239
> --- /dev/null
> +++ b/drivers/soc/qcom/soc_sleep_stats.c
> @@ -0,0 +1,281 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2011-2021, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/debugfs.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/seq_file.h>
> +
> +#include <linux/soc/qcom/smem.h>
> +#include <clocksource/arm_arch_timer.h>
> +
> +#define STAT_TYPE_ADDR		0x0
> +#define COUNT_ADDR		0x4
> +#define LAST_ENTERED_AT_ADDR	0x8
> +#define LAST_EXITED_AT_ADDR	0x10
> +#define ACCUMULATED_ADDR	0x18
> +#define CLIENT_VOTES_ADDR	0x1c

These aren't "addresses", they are offsets, and they are actually just
offset_of() on 

> +
> +#define STAT_OFFSET(record_no, type) (((record_no)*(sizeof(struct sleep_stats))) + (type))
> +#define APPENDED_STAT_OFFSET(record_no) ((record_no)*(sizeof(struct appended_stats)))
> +
> +#ifndef readq
> +#define readq(a) ({			\
> +	u64 val = readl((a) + 4);	\
> +	val <<= 32;			\
> +	val |=  readl((a));		\
> +	val;				\
> +})

I don't like this macro, can you please write it as a static inline,
with a comment that the operation is not expected to be atomic?

> +#endif
> +
> +struct subsystem_data {
> +	const char *name;
> +	u32 smem_item;
> +	u32 pid;
> +};
> +
> +static const struct subsystem_data subsystems[] = {
> +	{ "modem", 605, 1 },
> +	{ "wpss", 605, 13 },
> +	{ "adsp", 606, 2 },
> +	{ "cdsp", 607, 5 },
> +	{ "slpi", 608, 3 },
> +	{ "gpu", 609, 0 },
> +	{ "display", 610, 0 },
> +	{ "adsp_island", 613, 2 },
> +	{ "slpi_island", 613, 3 },
> +};
> +
> +struct stats_config {
> +	u32 offset_addr;
> +	u32 num_records;

Neither of these must be 32-bit, so please use int...or size_t instead.

> +	bool appended_stats_avail;
> +};
> +
> +struct stats_prv_data {

I don't see any "public" data, so how about just dropping "prv_"?

> +	bool appended_stats_avail;
> +	void __iomem *reg;

Call this "base" instead.

> +};
> +
> +struct sleep_stats {
> +	u32 stat_type;
> +	u32 count;
> +	u64 last_entered_at;
> +	u64 last_exited_at;
> +	u64 accumulated;
> +};
> +
> +struct appended_stats {
> +	u32 client_votes;
> +	u32 reserved[3];
> +};
> +
> +static void print_sleep_stats(struct seq_file *s, const struct sleep_stats *stat)

I would like all these functions to have a qcom_ prefix, to help me when
using cscope.

> +{
> +	u64 accumulated = stat->accumulated;
> +	/*
> +	 * If a subsystem is in sleep when reading the sleep stats adjust
> +	 * the accumulated sleep duration to show actual sleep time.
> +	 */
> +	if (stat->last_entered_at > stat->last_exited_at)
> +		accumulated += arch_timer_read_counter()
> +			       - stat->last_entered_at;

Unwrap this line, please.

> +
> +	seq_printf(s, "Count = %u\n", stat->count);

I think the format "Count: %u\n" would be more in line with other files.

> +	seq_printf(s, "Last Entered At = %llu\n", stat->last_entered_at);
> +	seq_printf(s, "Last Exited At = %llu\n", stat->last_exited_at);
> +	seq_printf(s, "Accumulated Duration = %llu\n", accumulated);
> +}
> +
> +static int subsystem_sleep_stats_show(struct seq_file *s, void *d)
> +{
> +	struct subsystem_data *subsystem = s->private;
> +	struct sleep_stats *stat;
> +
> +	/*
> +	 * Saving this pointer during probe may not help in cases like
> +	 * subsystem restart, besides not every subsystem is a remote processor
> +	 * for example gpu for which we can get start and stop notification.
> +	 *
> +	 * Lookup smem pointer each time to keep it simple.

These items are allocated on the first boot of the subsystem, so
acquiring and saving the pointer during probe wouldn't work. As such
you can simplify this comment to just say that:

	/* Items are allocated lazily, so lookup pointer each time */

> +	 */
> +	stat = qcom_smem_get(subsystem->pid, subsystem->smem_item, NULL);
> +	if (IS_ERR(stat))
> +		return PTR_ERR(stat);
> +
> +	print_sleep_stats(s, stat);
> +
> +	return 0;
> +}
> +
> +static int soc_sleep_stats_show(struct seq_file *s, void *d)
> +{
> +	struct stats_prv_data *prv_data = s->private;
> +	void __iomem *reg = prv_data->reg;
> +	struct sleep_stats stat;
> +
> +	stat.count = readl(reg + COUNT_ADDR);
> +	stat.last_entered_at = readq(reg + LAST_ENTERED_AT_ADDR);
> +	stat.last_exited_at = readq(reg + LAST_EXITED_AT_ADDR);
> +	stat.accumulated = readq(reg + ACCUMULATED_ADDR);

Can't you just use memcpy_fromio(&stat, reg, sizeof(stat)) ?

Naturally you'd need to define the endianess of the members, but that's
even better.

> +
> +	print_sleep_stats(s, &stat);
> +
> +	if (prv_data->appended_stats_avail) {
> +		struct appended_stats app_stat;
> +
> +		app_stat.client_votes = readl(reg + CLIENT_VOTES_ADDR);

If you did something like
		memcpy_fromio(&app_stat, reg + CLIENT_VOTES_ADDR);

then this would make sense, in this form a simple u32 on the stack would
do.


Also I don't think "app" is a good abbreviation for "appended", why
don't you name this "client_votes" (or just "votes")?

> +		seq_printf(s, "Client_votes = %#x\n", app_stat.client_votes);
> +	}
> +
> +	return 0;
> +}
> +
> +DEFINE_SHOW_ATTRIBUTE(soc_sleep_stats);
> +DEFINE_SHOW_ATTRIBUTE(subsystem_sleep_stats);
> +
> +static struct dentry *
> +soc_sleep_stats_create_debugfs_entries(void __iomem *reg,
> +				       struct stats_prv_data *prv_data,
> +				       u32 num_records)
> +{
> +	struct dentry *root;
> +	struct sleep_stats *stat;
> +	char stat_type[sizeof(u32)] = {0};
> +	u32 offset, type;
> +	int i, j;
> +
> +	root = debugfs_create_dir("qcom_sleep_stats", NULL);
> +
> +	for (i = 0; i < num_records; i++) {
> +		offset = STAT_OFFSET(i, STAT_TYPE_ADDR);

It's not really the offset for the STAT_TYPE you're looking for, it's
the beginning of the i'th struct sleep_stats...

> +
> +		if (prv_data[i].appended_stats_avail)
> +			offset += APPENDED_STAT_OFFSET(i);

And while this gets you the right result, if you consider offset to be
"the offset of the i'th struct sleep_stats" above, then this operation
is odd in my view...

I think that you should drop the STAT_OFFSET() and
APPENDED_STAT_OFFSET() and do something along the lines of:

	offset = 0;
	for (i = 0; i < num_records; i++) {
		prv_data[i].reg = reg + offset;
		...

		offset += sizeof(struct sleep_stats);
		if (prv_data[i].appended_stats_avail)
			offset += sizeof(struct appended_stats);
	}

> +
> +		prv_data[i].reg = reg + offset;
> +
> +		/*
> +		 * Read the low power mode name and create debugfs file for it.
> +		 * The names read could be of below,
> +		 * (may change depending on low power mode supported).
> +		 * For rpmh-sleep-stats: "aosd", "cxsd" and "ddr".
> +		 * For rpm-sleep-stats: "vmin" and "vlow".
> +		 */
> +		type = readl(prv_data[i].reg);
> +		for (j = 0; j < sizeof(u32); j++) {
> +			stat_type[j] = type & 0xff;
> +			type = type >> 8;
> +		}
> +		strim(stat_type);

If, per your examples above, stat_type is "aosd" then all sizeof(u32)
bytes of the string will be in use, strim() will go off the array to
find a NUL and possibly adjust whatever lies past stat_type on the
stack..

> +		debugfs_create_file(stat_type, 0400, root,

Further more, this would rely on that NUL somewhere down the stack.

So you need a "+ 1" on the stat_type length.

> +				    &prv_data[i],
> +				    &soc_sleep_stats_fops);
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(subsystems); i++) {
> +		stat = qcom_smem_get(subsystems[i].pid, subsystems[i].smem_item,
> +				     NULL);

80 char is just a guideline anyways, leave this unwrapped.

> +		if (IS_ERR(stat))
> +			continue;
> +
> +		debugfs_create_file(subsystems[i].name, 0400, root,
> +				    (void *)&subsystems[i],
> +				    &subsystem_sleep_stats_fops);
> +	}
> +
> +	return root;
> +}
> +
> +static int soc_sleep_stats_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	void __iomem *reg;
> +	void __iomem *offset_addr;
> +	phys_addr_t stats_base;
> +	resource_size_t stats_size;
> +	struct dentry *root;
> +	const struct stats_config *config;
> +	struct stats_prv_data *prv_data;
> +	int i;
> +
> +	config = device_get_match_data(&pdev->dev);
> +	if (!config)
> +		return -ENODEV;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res)
> +		return PTR_ERR(res);
> +
> +	offset_addr = ioremap(res->start + config->offset_addr, sizeof(u32));
> +	if (IS_ERR(offset_addr))
> +		return PTR_ERR(offset_addr);
> +
> +	stats_base = res->start | readl_relaxed(offset_addr);
> +	stats_size = resource_size(res);
> +	iounmap(offset_addr);
> +
> +	reg = devm_ioremap(&pdev->dev, stats_base, stats_size);
> +	if (!reg)
> +		return -ENOMEM;
> +
> +	prv_data = devm_kcalloc(&pdev->dev, config->num_records,
> +				sizeof(*prv_data), GFP_KERNEL);
> +	if (!prv_data)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < config->num_records; i++)
> +		prv_data[i].appended_stats_avail = config->appended_stats_avail;
> +
> +	root = soc_sleep_stats_create_debugfs_entries(reg, prv_data,
> +						      config->num_records);

debugfs_create_dir() here in probe instead and split the two halfs of
soc_sleep_stats_create_debugfs_entries() into their own function.

And please make up a shorter name for this.

> +	platform_set_drvdata(pdev, root);
> +
> +	return 0;
> +}
> +
> +static int soc_sleep_stats_remove(struct platform_device *pdev)
> +{
> +	struct dentry *root = platform_get_drvdata(pdev);
> +
> +	debugfs_remove_recursive(root);
> +
> +	return 0;
> +}
> +
> +static const struct stats_config rpm_data = {
> +	.offset_addr = 0x14,
> +	.num_records = 2,
> +	.appended_stats_avail = true,
> +};
> +
> +static const struct stats_config rpmh_data = {
> +	.offset_addr = 0x4,
> +	.num_records = 3,
> +	.appended_stats_avail = false,
> +};
> +
> +static const struct of_device_id soc_sleep_stats_table[] = {
> +	{ .compatible = "qcom,rpm-sleep-stats", .data = &rpm_data },
> +	{ .compatible = "qcom,rpmh-sleep-stats", .data = &rpmh_data },
> +	{ }
> +};
> +
> +static struct platform_driver soc_sleep_stats_driver = {
> +	.probe = soc_sleep_stats_probe,
> +	.remove = soc_sleep_stats_remove,
> +	.driver = {
> +		.name = "soc_sleep_stats",
> +		.of_match_table = soc_sleep_stats_table,
> +	},
> +};
> +module_platform_driver(soc_sleep_stats_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) SoC Sleep Stats driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_SOFTDEP("pre: smem");

I believe this should be "qcom_smem", but given that you call
qcom_smem_get() in your code you have a hard dependency in place
already. So, can you help me understand what use this softdep provide?

Regards,
Bjorn

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v7 2/5] soc: qcom: Add SoC sleep stats driver
  2021-04-12 23:43   ` Bjorn Andersson
@ 2021-05-21 11:10     ` Maulik Shah
  2021-05-26  4:00       ` Bjorn Andersson
  0 siblings, 1 reply; 9+ messages in thread
From: Maulik Shah @ 2021-05-21 11:10 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: swboyd, mka, evgreen, linux-arm-msm, linux-kernel, agross,
	dianders, linux, rnayak, lsrao, Mahesh Sivasubramanian,
	Lina Iyer

Hi,

On 4/13/2021 5:13 AM, Bjorn Andersson wrote:
> On Tue 06 Apr 05:27 CDT 2021, Maulik Shah wrote:
>
>> From: Mahesh Sivasubramanian <msivasub@codeaurora.org>
>>
>> Let's add a driver to read the stats from remote processor and
>> export to debugfs.
>>
>> The driver creates "qcom_sleep_stats" directory in debugfs and
>> adds files for various low power mode available. Below is sample
>> output with command
>>
>> cat /sys/kernel/debug/qcom_sleep_stats/ddr
>> count = 0
>> Last Entered At = 0
>> Last Exited At = 0
>> Accumulated Duration = 0
>>
>> Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
>> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
>> [mkshah: add subsystem sleep stats, create one file for each stat]
>> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
> Thanks for picking this up again Maulik, I hope we can get it merged
> soon.
Sure, i addressed the comments in v8.
>
>> ---
>>   drivers/soc/qcom/Kconfig           |  10 ++
>>   drivers/soc/qcom/Makefile          |   1 +
>>   drivers/soc/qcom/soc_sleep_stats.c | 281 +++++++++++++++++++++++++++++++++++++
>>   3 files changed, 292 insertions(+)
>>   create mode 100644 drivers/soc/qcom/soc_sleep_stats.c
>>
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index 79b568f..e80b63a 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -190,6 +190,16 @@ config QCOM_SOCINFO
>>   	 Say yes here to support the Qualcomm socinfo driver, providing
>>   	 information about the SoC to user space.
>>   
>> +config QCOM_SOC_SLEEP_STATS
>> +	tristate "Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver"
>> +	depends on ARCH_QCOM && DEBUG_FS || COMPILE_TEST
>> +	depends on QCOM_SMEM
>> +	help
>> +	  Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver to read
>> +	  the shared memory exported by the remote processor related to
>> +	  various SoC level low power modes statistics and export to debugfs
>> +	  interface.
>> +
>>   config QCOM_WCNSS_CTRL
>>   	tristate "Qualcomm WCNSS control driver"
>>   	depends on ARCH_QCOM || COMPILE_TEST
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index ad675a6..5f30d74 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>>   obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
>>   obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
>>   obj-$(CONFIG_QCOM_SOCINFO)	+= socinfo.o
>> +obj-$(CONFIG_QCOM_SOC_SLEEP_STATS)	+= soc_sleep_stats.o
>>   obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>>   obj-$(CONFIG_QCOM_APR) += apr.o
>>   obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
>> diff --git a/drivers/soc/qcom/soc_sleep_stats.c b/drivers/soc/qcom/soc_sleep_stats.c
>> new file mode 100644
>> index 0000000..6dfc239
>> --- /dev/null
>> +++ b/drivers/soc/qcom/soc_sleep_stats.c
>> @@ -0,0 +1,281 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2011-2021, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#include <linux/debugfs.h>
>> +#include <linux/device.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/seq_file.h>
>> +
>> +#include <linux/soc/qcom/smem.h>
>> +#include <clocksource/arm_arch_timer.h>
>> +
>> +#define STAT_TYPE_ADDR		0x0
>> +#define COUNT_ADDR		0x4
>> +#define LAST_ENTERED_AT_ADDR	0x8
>> +#define LAST_EXITED_AT_ADDR	0x10
>> +#define ACCUMULATED_ADDR	0x18
>> +#define CLIENT_VOTES_ADDR	0x1c
> These aren't "addresses", they are offsets, and they are actually just
> offset_of() on
Renamed them as _OFFSET instead of _ADDR.
>
>> +
>> +#define STAT_OFFSET(record_no, type) (((record_no)*(sizeof(struct sleep_stats))) + (type))
>> +#define APPENDED_STAT_OFFSET(record_no) ((record_no)*(sizeof(struct appended_stats)))
>> +
>> +#ifndef readq
>> +#define readq(a) ({			\
>> +	u64 val = readl((a) + 4);	\
>> +	val <<= 32;			\
>> +	val |=  readl((a));		\
>> +	val;				\
>> +})
> I don't like this macro, can you please write it as a static inline,
> with a comment that the operation is not expected to be atomic?
With below comment to use memcpy_fromio(), this macro will not be needed.
>
>> +#endif
>> +
>> +struct subsystem_data {
>> +	const char *name;
>> +	u32 smem_item;
>> +	u32 pid;
>> +};
>> +
>> +static const struct subsystem_data subsystems[] = {
>> +	{ "modem", 605, 1 },
>> +	{ "wpss", 605, 13 },
>> +	{ "adsp", 606, 2 },
>> +	{ "cdsp", 607, 5 },
>> +	{ "slpi", 608, 3 },
>> +	{ "gpu", 609, 0 },
>> +	{ "display", 610, 0 },
>> +	{ "adsp_island", 613, 2 },
>> +	{ "slpi_island", 613, 3 },
>> +};
>> +
>> +struct stats_config {
>> +	u32 offset_addr;
>> +	u32 num_records;
> Neither of these must be 32-bit, so please use int...or size_t instead.
Changed the type to size_t for both.
>
>> +	bool appended_stats_avail;
>> +};
>> +
>> +struct stats_prv_data {
> I don't see any "public" data, so how about just dropping "prv_"?
dropped.
>
>> +	bool appended_stats_avail;
>> +	void __iomem *reg;
> Call this "base" instead.
updated.
>
>> +};
>> +
>> +struct sleep_stats {
>> +	u32 stat_type;
>> +	u32 count;
>> +	u64 last_entered_at;
>> +	u64 last_exited_at;
>> +	u64 accumulated;
>> +};
>> +
>> +struct appended_stats {
>> +	u32 client_votes;
>> +	u32 reserved[3];
>> +};
>> +
>> +static void print_sleep_stats(struct seq_file *s, const struct sleep_stats *stat)
> I would like all these functions to have a qcom_ prefix, to help me when
> using cscope.
Updated all functions with qcom_ prefixes in v8.
>
>> +{
>> +	u64 accumulated = stat->accumulated;
>> +	/*
>> +	 * If a subsystem is in sleep when reading the sleep stats adjust
>> +	 * the accumulated sleep duration to show actual sleep time.
>> +	 */
>> +	if (stat->last_entered_at > stat->last_exited_at)
>> +		accumulated += arch_timer_read_counter()
>> +			       - stat->last_entered_at;
> Unwrap this line, please.
Done.
>
>> +
>> +	seq_printf(s, "Count = %u\n", stat->count);
> I think the format "Count: %u\n" would be more in line with other files.
Updated in v8.
>
>> +	seq_printf(s, "Last Entered At = %llu\n", stat->last_entered_at);
>> +	seq_printf(s, "Last Exited At = %llu\n", stat->last_exited_at);
>> +	seq_printf(s, "Accumulated Duration = %llu\n", accumulated);
>> +}
>> +
>> +static int subsystem_sleep_stats_show(struct seq_file *s, void *d)
>> +{
>> +	struct subsystem_data *subsystem = s->private;
>> +	struct sleep_stats *stat;
>> +
>> +	/*
>> +	 * Saving this pointer during probe may not help in cases like
>> +	 * subsystem restart, besides not every subsystem is a remote processor
>> +	 * for example gpu for which we can get start and stop notification.
>> +	 *
>> +	 * Lookup smem pointer each time to keep it simple.
> These items are allocated on the first boot of the subsystem, so
> acquiring and saving the pointer during probe wouldn't work. As such
> you can simplify this comment to just say that:
>
> 	/* Items are allocated lazily, so lookup pointer each time */
Modified the comment as per above.
>> +	 */
>> +	stat = qcom_smem_get(subsystem->pid, subsystem->smem_item, NULL);
>> +	if (IS_ERR(stat))
>> +		return PTR_ERR(stat);
>> +
>> +	print_sleep_stats(s, stat);
>> +
>> +	return 0;
>> +}
>> +
>> +static int soc_sleep_stats_show(struct seq_file *s, void *d)
>> +{
>> +	struct stats_prv_data *prv_data = s->private;
>> +	void __iomem *reg = prv_data->reg;
>> +	struct sleep_stats stat;
>> +
>> +	stat.count = readl(reg + COUNT_ADDR);
>> +	stat.last_entered_at = readq(reg + LAST_ENTERED_AT_ADDR);
>> +	stat.last_exited_at = readq(reg + LAST_EXITED_AT_ADDR);
>> +	stat.accumulated = readq(reg + ACCUMULATED_ADDR);
> Can't you just use memcpy_fromio(&stat, reg, sizeof(stat)) ?
>
> Naturally you'd need to define the endianess of the members, but that's
> even better.
Thanks updated to use memcpy_fromio().
>
>> +
>> +	print_sleep_stats(s, &stat);
>> +
>> +	if (prv_data->appended_stats_avail) {
>> +		struct appended_stats app_stat;
>> +
>> +		app_stat.client_votes = readl(reg + CLIENT_VOTES_ADDR);
> If you did something like
> 		memcpy_fromio(&app_stat, reg + CLIENT_VOTES_ADDR);
>
> then this would make sense, in this form a simple u32 on the stack would
> do.
Updated to use memcpy_fromio().
>
>
> Also I don't think "app" is a good abbreviation for "appended", why
> don't you name this "client_votes" (or just "votes")?
Renamed.
>
>> +		seq_printf(s, "Client_votes = %#x\n", app_stat.client_votes);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +DEFINE_SHOW_ATTRIBUTE(soc_sleep_stats);
>> +DEFINE_SHOW_ATTRIBUTE(subsystem_sleep_stats);
>> +
>> +static struct dentry *
>> +soc_sleep_stats_create_debugfs_entries(void __iomem *reg,
>> +				       struct stats_prv_data *prv_data,
>> +				       u32 num_records)
>> +{
>> +	struct dentry *root;
>> +	struct sleep_stats *stat;
>> +	char stat_type[sizeof(u32)] = {0};
>> +	u32 offset, type;
>> +	int i, j;
>> +
>> +	root = debugfs_create_dir("qcom_sleep_stats", NULL);
>> +
>> +	for (i = 0; i < num_records; i++) {
>> +		offset = STAT_OFFSET(i, STAT_TYPE_ADDR);
> It's not really the offset for the STAT_TYPE you're looking for, it's
> the beginning of the i'th struct sleep_stats...
>
>> +
>> +		if (prv_data[i].appended_stats_avail)
>> +			offset += APPENDED_STAT_OFFSET(i);
> And while this gets you the right result, if you consider offset to be
> "the offset of the i'th struct sleep_stats" above, then this operation
> is odd in my view...
>
> I think that you should drop the STAT_OFFSET() and
> APPENDED_STAT_OFFSET() and do something along the lines of:
>
> 	offset = 0;
> 	for (i = 0; i < num_records; i++) {
> 		prv_data[i].reg = reg + offset;
> 		...
>
> 		offset += sizeof(struct sleep_stats);
> 		if (prv_data[i].appended_stats_avail)
> 			offset += sizeof(struct appended_stats);
> 	}
Thanks, this is much clean. updated in v8.
>
>> +
>> +		prv_data[i].reg = reg + offset;
>> +
>> +		/*
>> +		 * Read the low power mode name and create debugfs file for it.
>> +		 * The names read could be of below,
>> +		 * (may change depending on low power mode supported).
>> +		 * For rpmh-sleep-stats: "aosd", "cxsd" and "ddr".
>> +		 * For rpm-sleep-stats: "vmin" and "vlow".
>> +		 */
>> +		type = readl(prv_data[i].reg);
>> +		for (j = 0; j < sizeof(u32); j++) {
>> +			stat_type[j] = type & 0xff;
>> +			type = type >> 8;
>> +		}
>> +		strim(stat_type);
> If, per your examples above, stat_type is "aosd" then all sizeof(u32)
> bytes of the string will be in use, strim() will go off the array to
> find a NUL and possibly adjust whatever lies past stat_type on the
> stack..
>
>> +		debugfs_create_file(stat_type, 0400, root,
> Further more, this would rely on that NUL somewhere down the stack.
>
> So you need a "+ 1" on the stat_type length.
Added +1 in stat_type length.
>
>> +				    &prv_data[i],
>> +				    &soc_sleep_stats_fops);
>> +	}
>> +
>> +	for (i = 0; i < ARRAY_SIZE(subsystems); i++) {
>> +		stat = qcom_smem_get(subsystems[i].pid, subsystems[i].smem_item,
>> +				     NULL);
> 80 char is just a guideline anyways, leave this unwrapped.
Updated in v8.
>
>> +		if (IS_ERR(stat))
>> +			continue;
>> +
>> +		debugfs_create_file(subsystems[i].name, 0400, root,
>> +				    (void *)&subsystems[i],
>> +				    &subsystem_sleep_stats_fops);
>> +	}
>> +
>> +	return root;
>> +}
>> +
>> +static int soc_sleep_stats_probe(struct platform_device *pdev)
>> +{
>> +	struct resource *res;
>> +	void __iomem *reg;
>> +	void __iomem *offset_addr;
>> +	phys_addr_t stats_base;
>> +	resource_size_t stats_size;
>> +	struct dentry *root;
>> +	const struct stats_config *config;
>> +	struct stats_prv_data *prv_data;
>> +	int i;
>> +
>> +	config = device_get_match_data(&pdev->dev);
>> +	if (!config)
>> +		return -ENODEV;
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	if (!res)
>> +		return PTR_ERR(res);
>> +
>> +	offset_addr = ioremap(res->start + config->offset_addr, sizeof(u32));
>> +	if (IS_ERR(offset_addr))
>> +		return PTR_ERR(offset_addr);
>> +
>> +	stats_base = res->start | readl_relaxed(offset_addr);
>> +	stats_size = resource_size(res);
>> +	iounmap(offset_addr);
>> +
>> +	reg = devm_ioremap(&pdev->dev, stats_base, stats_size);
>> +	if (!reg)
>> +		return -ENOMEM;
>> +
>> +	prv_data = devm_kcalloc(&pdev->dev, config->num_records,
>> +				sizeof(*prv_data), GFP_KERNEL);
>> +	if (!prv_data)
>> +		return -ENOMEM;
>> +
>> +	for (i = 0; i < config->num_records; i++)
>> +		prv_data[i].appended_stats_avail = config->appended_stats_avail;
>> +
>> +	root = soc_sleep_stats_create_debugfs_entries(reg, prv_data,
>> +						      config->num_records);
> debugfs_create_dir() here in probe instead and split the two halfs of
> soc_sleep_stats_create_debugfs_entries() into their own function.
splitted in two separate functions.
> And please make up a shorter name for this.
updated to shorter name.
>
>> +	platform_set_drvdata(pdev, root);
>> +
>> +	return 0;
>> +}
>> +
>> +static int soc_sleep_stats_remove(struct platform_device *pdev)
>> +{
>> +	struct dentry *root = platform_get_drvdata(pdev);
>> +
>> +	debugfs_remove_recursive(root);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct stats_config rpm_data = {
>> +	.offset_addr = 0x14,
>> +	.num_records = 2,
>> +	.appended_stats_avail = true,
>> +};
>> +
>> +static const struct stats_config rpmh_data = {
>> +	.offset_addr = 0x4,
>> +	.num_records = 3,
>> +	.appended_stats_avail = false,
>> +};
>> +
>> +static const struct of_device_id soc_sleep_stats_table[] = {
>> +	{ .compatible = "qcom,rpm-sleep-stats", .data = &rpm_data },
>> +	{ .compatible = "qcom,rpmh-sleep-stats", .data = &rpmh_data },
>> +	{ }
>> +};
>> +
>> +static struct platform_driver soc_sleep_stats_driver = {
>> +	.probe = soc_sleep_stats_probe,
>> +	.remove = soc_sleep_stats_remove,
>> +	.driver = {
>> +		.name = "soc_sleep_stats",
>> +		.of_match_table = soc_sleep_stats_table,
>> +	},
>> +};
>> +module_platform_driver(soc_sleep_stats_driver);
>> +
>> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) SoC Sleep Stats driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_SOFTDEP("pre: smem");
> I believe this should be "qcom_smem",
the module has smem.ko file so "smem" looks proper.
>   but given that you call
> qcom_smem_get() in your code you have a hard dependency in place
> already. So, can you help me understand what use this softdep provide?

If both smem and soc_sleep_stats are compiled as DLKMs, this is to make 
sure smem module was loaded first by keeping pre soft dependency.

Thanks,
Maulik

>
> Regards,
> Bjorn

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v7 2/5] soc: qcom: Add SoC sleep stats driver
  2021-05-21 11:10     ` Maulik Shah
@ 2021-05-26  4:00       ` Bjorn Andersson
  0 siblings, 0 replies; 9+ messages in thread
From: Bjorn Andersson @ 2021-05-26  4:00 UTC (permalink / raw)
  To: Maulik Shah
  Cc: swboyd, mka, evgreen, linux-arm-msm, linux-kernel, agross,
	dianders, linux, rnayak, lsrao, Mahesh Sivasubramanian,
	Lina Iyer

On Fri 21 May 06:10 CDT 2021, Maulik Shah wrote:
> On 4/13/2021 5:13 AM, Bjorn Andersson wrote:
> > On Tue 06 Apr 05:27 CDT 2021, Maulik Shah wrote:
[..]
> > > diff --git a/drivers/soc/qcom/soc_sleep_stats.c b/drivers/soc/qcom/soc_sleep_stats.c
[..]
> > > +MODULE_SOFTDEP("pre: smem");
> > I believe this should be "qcom_smem",
> the module has smem.ko file so "smem" looks proper.
> >   but given that you call
> > qcom_smem_get() in your code you have a hard dependency in place
> > already. So, can you help me understand what use this softdep provide?
> 
> If both smem and soc_sleep_stats are compiled as DLKMs, this is to make sure
> smem module was loaded first by keeping pre soft dependency.
> 

But we're making a direct function call into the qcom_smem driver, so we
already have a hard dependency on qcom_smem.ko being loaded.

Regards,
Bjorn

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-05-26  4:00 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-06 10:27 [PATCH v7 0/5] Introduce SoC sleep stats driver Maulik Shah
2021-04-06 10:27 ` [PATCH v7 1/5] dt-bindings: Introduce SoC sleep stats bindings Maulik Shah
2021-04-06 10:27 ` [PATCH v7 2/5] soc: qcom: Add SoC sleep stats driver Maulik Shah
2021-04-12 23:43   ` Bjorn Andersson
2021-05-21 11:10     ` Maulik Shah
2021-05-26  4:00       ` Bjorn Andersson
2021-04-06 10:27 ` [PATCH v7 3/5] arm64: dts: qcom: sc7180: Enable SoC sleep stats Maulik Shah
2021-04-06 10:27 ` [PATCH v7 4/5] arm64: defconfig: Enable SoC sleep stats driver Maulik Shah
2021-04-06 10:27 ` [PATCH v7 5/5] arm64: dts: qcom: sc7280: Enable SoC sleep stats Maulik Shah

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).