From: satya priya <skakit@codeaurora.org> To: Dmitry Torokhov <dmitry.torokhov@gmail.com>, Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Sebastian Reichel <sre@kernel.org> Cc: David Collins <collinsd@codeaurora.org>, kgunda@codeaurora.org, Vinod Koul <vkoul@kernel.org>, Courtney Cavin <courtney.cavin@sonymobile.com>, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, satya priya <skakit@codeaurora.org> Subject: [PATCH V2 4/4] dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml Date: Thu, 8 Apr 2021 17:01:09 +0530 [thread overview] Message-ID: <1617881469-31965-5-git-send-email-skakit@codeaurora.org> (raw) In-Reply-To: <1617881469-31965-1-git-send-email-skakit@codeaurora.org> Convert qcom pm8941 power key binding from .txt to .yaml format. Signed-off-by: satya priya <skakit@codeaurora.org> --- Changes in V2: - Fixed bot errors, took reference from input.yaml for "linux,code" - Added one complete example for powerkey and resin, and referenced it in main PON binding. - Moved this patch to the end of the series. .../bindings/input/qcom,pm8941-pwrkey.txt | 55 -------------- .../bindings/input/qcom,pm8941-pwrkey.yaml | 88 ++++++++++++++++++++++ 2 files changed, 88 insertions(+), 55 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt create mode 100644 Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt deleted file mode 100644 index 6cd08bc..0000000 --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt +++ /dev/null @@ -1,55 +0,0 @@ -Qualcomm PM8941 PMIC Power Key - -PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8941-pwrkey" - "qcom,pm8941-resin" - "qcom,pmk8350-pwrkey" - "qcom,pmk8350-resin" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: base address of registers for block - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: key change interrupt; The format of the specifier is - defined by the binding document describing the node's - interrupt parent. - -- debounce: - Usage: optional - Value type: <u32> - Definition: time in microseconds that key must be pressed or released - for state change interrupt to trigger. - -- bias-pull-up: - Usage: optional - Value type: <empty> - Definition: presence of this property indicates that the KPDPWR_N pin - should be configured for pull up. - -- linux,code: - Usage: optional - Value type: <u32> - Definition: The input key-code associated with the power key. - Use the linux event codes defined in - include/dt-bindings/input/linux-event-codes.h - When property is omitted KEY_POWER is assumed. - -EXAMPLE - - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; - reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_POWER>; - }; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml new file mode 100644 index 0000000..fb6cbe8 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/qcom,pm8941-pwrkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8941 PMIC Power Key + +maintainers: + - Courtney Cavin <courtney.cavin@sonymobile.com> + - Vinod Koul <vkoul@kernel.org> + +properties: + compatible: + enum: + - qcom,pm8941-pwrkey + - qcom,pm8941-resin + - qcom,pmk8350-pwrkey + - qcom,pmk8350-resin + + interrupts: + description: | + Key change interrupt; The format of the specifier is + defined by the binding document describing the node's + interrupt parent. + + debounce: + description: | + Time in microseconds that key must be pressed or + released for state change interrupt to trigger. + $ref: /schemas/types.yaml#/definitions/uint32 + + bias-pull-up: + description: | + Presence of this property indicates that the KPDPWR_N + pin should be configured for pull up. + $ref: /schemas/types.yaml#/definitions/flag + + linux,code: + description: | + The input key-code associated with the power key. + Use the linux event codes defined in + include/dt-bindings/input/linux-event-codes.h + When property is omitted KEY_POWER is assumed. + $ref: "input.yaml#" + +required: + - compatible + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/spmi/spmi.h> + spmi_bus: spmi@c440000 { + reg = <0x0c440000 0x1100>; + #address-cells = <2>; + #size-cells = <0>; + pmk8350: pmic@0 { + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + pmk8350_pon: pon_hlos@1300 { + reg = <0x1300>; + compatible = "qcom,pm8998-pon"; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; + }; +... -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2021-04-08 11:32 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-04-08 11:31 [PATCH V2 0/4] Add support for PMK8350 PON_HLOS PMIC peripheral satya priya 2021-04-08 11:31 ` [PATCH V2 1/4] input: pm8941-pwrkey: add " satya priya 2021-04-13 3:00 ` Bjorn Andersson 2021-04-08 11:31 ` [PATCH V2 2/4] dt-bindings: input: pm8941-pwrkey: add pmk8350 compatible strings satya priya 2021-04-09 18:46 ` Rob Herring 2021-04-08 11:31 ` [PATCH V2 3/4] dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml satya priya 2021-04-08 13:00 ` Sebastian Reichel 2021-04-09 8:18 ` skakit 2021-04-09 11:57 ` Sebastian Reichel 2021-04-09 13:38 ` skakit 2021-04-27 6:15 ` skakit 2021-04-27 8:37 ` Sebastian Reichel 2021-05-05 5:08 ` skakit 2021-05-07 9:45 ` skakit 2021-05-07 11:29 ` Sebastian Reichel 2021-04-08 11:31 ` satya priya [this message] 2021-04-09 18:50 ` [PATCH V2 4/4] dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key " Rob Herring 2021-04-21 6:23 ` skakit
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1617881469-31965-5-git-send-email-skakit@codeaurora.org \ --to=skakit@codeaurora.org \ --cc=agross@kernel.org \ --cc=bjorn.andersson@linaro.org \ --cc=collinsd@codeaurora.org \ --cc=courtney.cavin@sonymobile.com \ --cc=devicetree@vger.kernel.org \ --cc=dmitry.torokhov@gmail.com \ --cc=kgunda@codeaurora.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-input@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=sre@kernel.org \ --cc=vkoul@kernel.org \ --subject='Re: [PATCH V2 4/4] dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).