linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Taniya Das <tdas@codeaurora.org>
To: "Stephen Boyd" <sboyd@kernel.org>,
	"Michael Turquette  " <mturquette@baylibre.com>
Cc: Rajendra Nayak <rnayak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, robh@kernel.org, robh+dt@kernel.org,
	Taniya Das <tdas@codeaurora.org>
Subject: [PATCH v1 2/2] clk: qcom: Add lpass clock controller driver for SC7280
Date: Fri,  9 Apr 2021 17:24:32 +0530	[thread overview]
Message-ID: <1617969272-10246-2-git-send-email-tdas@codeaurora.org> (raw)
In-Reply-To: <1617969272-10246-1-git-send-email-tdas@codeaurora.org>

Add support for the lpass clock controller found on SC7280 based devices.
This would allow lpass peripheral loader drivers to control the clocks to
bring the subsystem out of reset.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/Kconfig          |   8 ++
 drivers/clk/qcom/Makefile         |   1 +
 drivers/clk/qcom/lpasscc-sc7280.c | 216 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 225 insertions(+)
 create mode 100644 drivers/clk/qcom/lpasscc-sc7280.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 45646b8..caf986e 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -361,6 +361,14 @@ config SC_LPASS_CORECC_7180
 	  Say Y if you want to use LPASS clocks and power domains of the LPASS
 	  core clock controller.

+config SC_LPASSCC_7280
+	tristate "SC7280 Low Power Audio Subsystem (LPAAS) Clock Controller"
+	select SC_GCC_7280
+	help
+	  Support for the LPASS clock controller on SC7280 devices.
+	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
+	  controller to reset the LPASS subsystem.
+
 config SC_GPUCC_7180
 	tristate "SC7180 Graphics Clock Controller"
 	select SC_GCC_7180
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index c829131..6f0ab5f 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_SC_GCC_7280) += gcc-sc7280.o
 obj-$(CONFIG_SC_GCC_8180X) += gcc-sc8180x.o
 obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
 obj-$(CONFIG_SC_LPASS_CORECC_7180) += lpasscorecc-sc7180.o
+obj-$(CONFIG_SC_LPASSCC_7280) += lpasscc-sc7280.o
 obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
 obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
diff --git a/drivers/clk/qcom/lpasscc-sc7280.c b/drivers/clk/qcom/lpasscc-sc7280.c
new file mode 100644
index 0000000..89f1ad6
--- /dev/null
+++ b/drivers/clk/qcom/lpasscc-sc7280.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,lpass-sc7280.h>
+
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "common.h"
+
+static struct clk_branch lpass_q6ss_ahbm_clk = {
+	.halt_reg = 0x1c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_q6ss_ahbm_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_q6ss_ahbs_clk = {
+	.halt_reg = 0x20,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x20,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_q6ss_ahbs_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_top_cc_lpi_q6_axim_hs_clk = {
+	.halt_reg = 0x0,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x0,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_top_cc_lpi_q6_axim_hs_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_qdsp6ss_core_clk = {
+	.halt_reg = 0x20,
+	/* CLK_OFF would not toggle until LPASS is out of reset */
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x20,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_qdsp6ss_core_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_qdsp6ss_xo_clk = {
+	.halt_reg = 0x38,
+	/* CLK_OFF would not toggle until LPASS is out of reset */
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x38,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_qdsp6ss_xo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_qdsp6ss_sleep_clk = {
+	.halt_reg = 0x3c,
+	/* CLK_OFF would not toggle until LPASS is out of reset */
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x3c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_qdsp6ss_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct regmap_config lpass_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.fast_io	= true,
+};
+
+static struct clk_regmap *lpass_cc_sc7280_clocks[] = {
+	[LPASS_Q6SS_AHBM_CLK] = &lpass_q6ss_ahbm_clk.clkr,
+	[LPASS_Q6SS_AHBS_CLK] = &lpass_q6ss_ahbs_clk.clkr,
+};
+
+static const struct qcom_cc_desc lpass_cc_sc7280_desc = {
+	.config = &lpass_regmap_config,
+	.clks = lpass_cc_sc7280_clocks,
+	.num_clks = ARRAY_SIZE(lpass_cc_sc7280_clocks),
+};
+
+static struct clk_regmap *lpass_cc_top_sc7280_clocks[] = {
+	[LPASS_TOP_CC_LPI_Q6_AXIM_HS_CLK] =
+				&lpass_top_cc_lpi_q6_axim_hs_clk.clkr,
+};
+
+static const struct qcom_cc_desc lpass_cc_top_sc7280_desc = {
+	.config = &lpass_regmap_config,
+	.clks = lpass_cc_top_sc7280_clocks,
+	.num_clks = ARRAY_SIZE(lpass_cc_top_sc7280_clocks),
+};
+
+static struct clk_regmap *lpass_qdsp6ss_sc7280_clocks[] = {
+	[LPASS_QDSP6SS_XO_CLK] = &lpass_qdsp6ss_xo_clk.clkr,
+	[LPASS_QDSP6SS_SLEEP_CLK] = &lpass_qdsp6ss_sleep_clk.clkr,
+	[LPASS_QDSP6SS_CORE_CLK] = &lpass_qdsp6ss_core_clk.clkr,
+};
+
+static const struct qcom_cc_desc lpass_qdsp6ss_sc7280_desc = {
+	.config = &lpass_regmap_config,
+	.clks = lpass_qdsp6ss_sc7280_clocks,
+	.num_clks = ARRAY_SIZE(lpass_qdsp6ss_sc7280_clocks),
+};
+
+static int lpass_cc_sc7280_probe(struct platform_device *pdev)
+{
+	const struct qcom_cc_desc *desc;
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_clk_create(&pdev->dev);
+	if (ret)
+		goto disable_pm_runtime;
+
+	ret = pm_clk_add(&pdev->dev, "iface");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to acquire iface clock\n");
+		goto destroy_pm_clk;
+	}
+
+	lpass_regmap_config.name = "qdsp6ss";
+	desc = &lpass_qdsp6ss_sc7280_desc;
+
+	ret = qcom_cc_probe_by_index(pdev, 0, desc);
+	if (ret)
+		goto destroy_pm_clk;
+
+	lpass_regmap_config.name = "top_cc";
+	desc = &lpass_cc_top_sc7280_desc;
+
+	ret = qcom_cc_probe_by_index(pdev, 1, desc);
+	if (ret)
+		goto destroy_pm_clk;
+
+	lpass_regmap_config.name = "cc";
+	desc = &lpass_cc_sc7280_desc;
+
+	ret = qcom_cc_probe_by_index(pdev, 2, desc);
+	if (ret)
+		goto destroy_pm_clk;
+
+	return 0;
+
+destroy_pm_clk:
+	pm_clk_destroy(&pdev->dev);
+
+disable_pm_runtime:
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static const struct of_device_id lpass_cc_sc7280_match_table[] = {
+	{ .compatible = "qcom,sc7280-lpasscc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpass_cc_sc7280_match_table);
+
+static struct platform_driver lpass_cc_sc7280_driver = {
+	.probe		= lpass_cc_sc7280_probe,
+	.driver		= {
+		.name	= "sc7280-lpasscc",
+		.of_match_table = lpass_cc_sc7280_match_table,
+	},
+};
+
+static int __init lpass_cc_sc7280_init(void)
+{
+	return platform_driver_register(&lpass_cc_sc7280_driver);
+}
+subsys_initcall(lpass_cc_sc7280_init);
+
+static void __exit lpass_cc_sc7280_exit(void)
+{
+	platform_driver_unregister(&lpass_cc_sc7280_driver);
+}
+module_exit(lpass_cc_sc7280_exit);
+
+MODULE_DESCRIPTION("QTI LPASS_CC SC7280 Driver");
+MODULE_LICENSE("GPL v2");
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.


  reply	other threads:[~2021-04-09 11:55 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-09 11:54 [PATCH v1 1/2] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280 Taniya Das
2021-04-09 11:54 ` Taniya Das [this message]
2021-04-12 17:03 ` Rob Herring
2021-07-22 22:35   ` Stephen Boyd
2021-08-31 10:36 Taniya Das
2021-08-31 10:36 ` [PATCH v1 2/2] clk: qcom: Add lpass clock controller driver for SC7280 Taniya Das
2021-09-01  5:38   ` Stephen Boyd
2021-10-06  1:39     ` Taniya Das

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1617969272-10246-2-git-send-email-tdas@codeaurora.org \
    --to=tdas@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).