Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Deepak Kumar Singh <deesin@codeaurora.org>
To: bjorn.andersson@linaro.org, clew@codeaurora.org,
	sibis@codeaurora.org, manivannan.sadhasivam@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-remoteproc@vger.kernel.org,
	Deepak Kumar Singh <deesin@codeaurora.org>,
	Andy Gross <agross@kernel.org>
Subject: [PATCH V3 1/2] soc: qcom: aoss: Expose send for generic usecase
Date: Thu,  6 May 2021 22:36:53 +0530
Message-ID: <1620320818-2206-2-git-send-email-deesin@codeaurora.org> (raw)
In-Reply-To: <1620320818-2206-1-git-send-email-deesin@codeaurora.org>

Not all upcoming usecases will have an interface to allow the aoss
driver to hook onto. Expose the send api and create a get function to
enable drivers to send their own messages to aoss.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
---
 drivers/soc/qcom/qcom_aoss.c       | 70 ++++++++++++++++++++++++++++++++++++--
 include/linux/soc/qcom/qcom_aoss.h | 33 ++++++++++++++++++
 2 files changed, 101 insertions(+), 2 deletions(-)
 create mode 100644 include/linux/soc/qcom/qcom_aoss.h

diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 53acb94..cd75d4d 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -8,10 +8,12 @@
 #include <linux/io.h>
 #include <linux/mailbox_client.h>
 #include <linux/module.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/thermal.h>
 #include <linux/slab.h>
+#include <linux/soc/qcom/qcom_aoss.h>
 
 #define QMP_DESC_MAGIC			0x0
 #define QMP_DESC_VERSION		0x4
@@ -61,6 +63,7 @@ struct qmp_cooling_device {
  * @mbox_chan: mailbox channel used to ring the doorbell on transmit
  * @offset: offset within @msgram where messages should be written
  * @size: maximum size of the messages to be transmitted
+ * @orphan: tarcks whether qmp handle is valid
  * @event: wait_queue for synchronization with the IRQ
  * @tx_lock: provides synchronization between multiple callers of qmp_send()
  * @qdss_clk: QDSS clock hw struct
@@ -76,6 +79,8 @@ struct qmp {
 
 	size_t offset;
 	size_t size;
+	atomic_t  orphan;
+	struct kref refcount;
 
 	wait_queue_head_t event;
 
@@ -223,11 +228,17 @@ static bool qmp_message_empty(struct qmp *qmp)
  *
  * Return: 0 on success, negative errno on failure
  */
-static int qmp_send(struct qmp *qmp, const void *data, size_t len)
+int qmp_send(struct qmp *qmp, const void *data, size_t len)
 {
 	long time_left;
 	int ret;
 
+	if (WARN_ON(IS_ERR_OR_NULL(qmp) || !data))
+		return -EINVAL;
+
+	if (atomic_read(&qmp->orphan))
+		return -EINVAL;
+
 	if (WARN_ON(len + sizeof(u32) > qmp->size))
 		return -EINVAL;
 
@@ -261,6 +272,7 @@ static int qmp_send(struct qmp *qmp, const void *data, size_t len)
 
 	return ret;
 }
+EXPORT_SYMBOL(qmp_send);
 
 static int qmp_qdss_clk_prepare(struct clk_hw *hw)
 {
@@ -515,6 +527,54 @@ static void qmp_cooling_devices_remove(struct qmp *qmp)
 		thermal_cooling_device_unregister(qmp->cooling_devs[i].cdev);
 }
 
+/**
+ * qmp_get() - get a qmp handle from a device
+ * @dev: client device pointer
+ *
+ * Return: handle to qmp device on success, ERR_PTR() on failure
+ */
+struct qmp *qmp_get(struct device *dev)
+{
+	struct platform_device *pdev;
+	struct device_node *np;
+	struct qmp *qmp;
+
+	if (!dev || !dev->of_node)
+		return ERR_PTR(-EINVAL);
+
+	np = of_parse_phandle(dev->of_node, "qcom,qmp", 0);
+	if (!np)
+		return ERR_PTR(-ENODEV);
+
+	pdev = of_find_device_by_node(np);
+	of_node_put(np);
+	if (!pdev)
+		return ERR_PTR(-EINVAL);
+
+	qmp = platform_get_drvdata(pdev);
+	platform_device_put(pdev);
+
+	if (qmp)
+		kref_get(&qmp->refcount);
+
+	return qmp ? qmp : ERR_PTR(-EPROBE_DEFER);
+}
+EXPORT_SYMBOL(qmp_get);
+
+static void qmp_handle_release(struct kref *ref)
+{
+	struct qmp *qmp = container_of(ref, struct qmp, refcount);
+
+	kfree(qmp);
+}
+
+void qmp_put(struct qmp *qmp)
+{
+	if (!IS_ERR_OR_NULL(qmp))
+		kref_put(&qmp->refcount, qmp_handle_release);
+}
+EXPORT_SYMBOL(qmp_put);
+
 static int qmp_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -522,13 +582,14 @@ static int qmp_probe(struct platform_device *pdev)
 	int irq;
 	int ret;
 
-	qmp = devm_kzalloc(&pdev->dev, sizeof(*qmp), GFP_KERNEL);
+	qmp = kzalloc(sizeof(*qmp), GFP_KERNEL);
 	if (!qmp)
 		return -ENOMEM;
 
 	qmp->dev = &pdev->dev;
 	init_waitqueue_head(&qmp->event);
 	mutex_init(&qmp->tx_lock);
+	kref_init(&qmp->refcount);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	qmp->msgram = devm_ioremap_resource(&pdev->dev, res);
@@ -569,6 +630,8 @@ static int qmp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, qmp);
 
+	atomic_set(&qmp->orphan, 0);
+
 	return 0;
 
 err_remove_qdss_clk:
@@ -577,6 +640,7 @@ static int qmp_probe(struct platform_device *pdev)
 	qmp_close(qmp);
 err_free_mbox:
 	mbox_free_channel(qmp->mbox_chan);
+	kfree(qmp);
 
 	return ret;
 }
@@ -590,7 +654,9 @@ static int qmp_remove(struct platform_device *pdev)
 	qmp_cooling_devices_remove(qmp);
 
 	qmp_close(qmp);
+	atomic_set(&qmp->orphan, 1);
 	mbox_free_channel(qmp->mbox_chan);
+	kref_put(&qmp->refcount, qmp_handle_release);
 
 	return 0;
 }
diff --git a/include/linux/soc/qcom/qcom_aoss.h b/include/linux/soc/qcom/qcom_aoss.h
new file mode 100644
index 0000000..27d00f7
--- /dev/null
+++ b/include/linux/soc/qcom/qcom_aoss.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __QCOM_AOSS_H__
+#define __QCOM_AOSS_H__
+
+#include <linux/err.h>
+#include <linux/device.h>
+
+struct qmp;
+
+#if IS_ENABLED(CONFIG_QCOM_AOSS_QMP)
+
+int qmp_send(struct qmp *qmp, const void *data, size_t len);
+struct qmp *qmp_get(struct device *dev);
+
+#else
+
+static inline int qmp_send(struct qmp *qmp, const void *data, size_t len)
+{
+	return -ENODEV;
+}
+
+static inline struct qmp *qmp_get(struct device *dev)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+#endif
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-06 17:06 [PATCH V3 0/2] " Deepak Kumar Singh
2021-05-06 17:06 ` Deepak Kumar Singh [this message]
2021-05-28  3:32   ` [PATCH V3 1/2] " Bjorn Andersson
2021-06-07 11:42   ` Sibi Sankar
2021-05-06 17:06 ` [PATCH V3 2/2] soc: qcom: aoss: Add debugfs entry Deepak Kumar Singh
  -- strict thread matches above, loose matches on Subject: below --
2020-06-26 14:46 [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Deepak Kumar Singh
2020-06-26 14:46 ` [PATCH V6 1/4] rpmsg: core: Add signal API support Deepak Kumar Singh
2021-05-06 17:18   ` Deepak Kumar Singh
2020-06-26 14:46 ` [PATCH V6 2/4] rpmsg: glink: Add support to handle signals command Deepak Kumar Singh
2021-05-06 17:17   ` Deepak Kumar Singh
2020-06-26 14:46 ` [PATCH V6 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support Deepak Kumar Singh
2020-06-26 14:46 ` [PATCH V6 4/4] rpmsg: char: Add signal callback and POLLPRI support Deepak Kumar Singh
2020-07-06 18:04 ` [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Mathieu Poirier
2020-09-02 16:30   ` Deepak Kumar Singh
2020-09-02 16:40     ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1620320818-2206-2-git-send-email-deesin@codeaurora.org \
    --to=deesin@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=clew@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git