From: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com, devicetree@vger.kernel.org
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
rjliao@codeaurora.org, hbandi@codeaurora.org,
abhishekpandit@chromium.org,
Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Subject: [PATCH v3 5/5] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn6750
Date: Thu, 6 May 2021 23:03:12 +0530 [thread overview]
Message-ID: <1620322392-27148-6-git-send-email-gubbaven@codeaurora.org> (raw)
In-Reply-To: <1620322392-27148-1-git-send-email-gubbaven@codeaurora.org>
This patch enables regulators and gpios for the Qualcomm Bluetooth wcn6750
controller.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
---
.../bindings/net/qualcomm-bluetooth.yaml | 71 ++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
index 3f3ec4d..0a90335 100644
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
@@ -21,11 +21,17 @@ properties:
- qcom,wcn3991-bt
- qcom,wcn3998-bt
- qcom,qca6390-bt
+ - qcom,wcn6750-bt
enable-gpios:
maxItems: 1
description: gpio specifier used to enable chip
+ swctrl-gpios:
+ maxItems: 1
+ description: gpio specifier is used to find status
+ of clock supply to SoC
+
clocks:
maxItems: 1
description: clock provided to the controller (SUSCLK_32KHZ)
@@ -42,6 +48,30 @@ properties:
vddch0-supply:
description: VDD_CH0 supply regulator handle
+ vddaon-supply:
+ description: VDD_AON supply regulator handle
+
+ vddbtcxmx-supply:
+ description: VDD_BT_CXMX supply regulator handle
+
+ vddrfacmn-supply:
+ description: VDD_RFA_CMN supply regulator handle
+
+ vddrfa0p8-supply:
+ description: VDD_RFA_0P8 suppply regulator handle
+
+ vddrfa1p7-supply:
+ description: VDD_RFA_1P7 supply regulator handle
+
+ vddrfa1p2-supply:
+ description: VDD_RFA_1P2 supply regulator handle
+
+ vddrfa2p2-supply:
+ description: VDD_RFA_2P2 supply regulator handle
+
+ vddasd-supply:
+ description: VDD_ASD supply regulator handle
+
max-speed:
description: see Documentation/devicetree/bindings/serial/serial.yaml
@@ -84,6 +114,25 @@ allOf:
- vddrf-supply
- vddch0-supply
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,wcn6750-bt
+ then:
+ required:
+ - enable-gpios
+ - swctrl-gpios
+ - vddio-supply
+ - vddaon-supply
+ - vddbtcxmx-supply
+ - vddrfacmn-supply
+ - vddrfa0p8-supply
+ - vddrfa1p7-supply
+ - vddrfa1p2-supply
+ - vddasd-supply
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
@@ -109,3 +158,25 @@ examples:
firmware-name = "crnv21.bin";
};
};
+ - |
+ serial {
+
+ bluetooth {
+ compatible = "qcom,wcn6750-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_default>;
+ enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+ swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ vddio-supply = <&vreg_l19b_1p8>;
+ vddaon-supply = <&vreg_s7b_0p9>;
+ vddbtcxmx-supply = <&vreg_s7b_0p9>;
+ vddrfacmn-supply = <&vreg_s7b_0p9>;
+ vddrfa0p8-supply = <&vreg_s7b_0p9>;
+ vddrfa1p7-supply = <&vreg_s1b_1p8>;
+ vddrfa1p2-supply = <&vreg_s8b_1p2>;
+ vddrfa2p2-supply = <&vreg_s1c_2p2>;
+ vddasd-supply = <&vreg_l11c_2p8>;
+ max-speed = <3200000>;
+ firmware-name = "msnv11.bin";
+ };
+ };
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2021-05-06 17:33 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-06 17:33 [PATCH v3 0/5] Enable Bluetooth functinality for WCN6750 Venkata Lakshmi Narayana Gubba
2021-05-06 17:33 ` [PATCH v3 1/5] Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750 Venkata Lakshmi Narayana Gubba
2021-05-06 17:33 ` [PATCH v3 2/5] Bluetooth: btqca: Add support for firmware image with mbn type for WCN6750 Venkata Lakshmi Narayana Gubba
2021-05-07 7:00 ` Marcel Holtmann
2021-05-10 17:16 ` gubbaven
2021-05-06 17:33 ` [PATCH v3 3/5] Bluetooth: btqca: Moved extracting rom version info to common place Venkata Lakshmi Narayana Gubba
2021-05-07 7:53 ` Marcel Holtmann
2021-05-10 17:09 ` gubbaven
2021-05-06 17:33 ` [PATCH v3 4/5] dt-bindings: net: bluetooth: Convert Qualcomm BT binding to DT schema Venkata Lakshmi Narayana Gubba
2021-05-07 1:17 ` Rob Herring
2021-05-07 6:55 ` Marcel Holtmann
2021-05-07 17:19 ` Rob Herring
2021-05-13 15:21 ` Marcel Holtmann
2021-05-18 16:30 ` gubbaven
2021-05-06 17:33 ` Venkata Lakshmi Narayana Gubba [this message]
2021-05-07 1:19 ` [PATCH v3 5/5] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn6750 Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1620322392-27148-6-git-send-email-gubbaven@codeaurora.org \
--to=gubbaven@codeaurora.org \
--cc=abhishekpandit@chromium.org \
--cc=bgodavar@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=hbandi@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
--cc=rjliao@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).